Lexmark X204N User's Guide - Page 99

Menu item Driver to fax Yes No Dial Mode Tone Pulse Max Speed 2400 4800 9600 14400 33600 Background Removal -4 to +4 Contrast Best for content 0-5 Shadow Detail -4 to +4 Scan edge to edge On Off Sharpness 1-5 Fax Receive Settings Menu item Enable Fax Receive On Off Rings to Answer 1-25 Auto Answer Yes No Manual Answer Code 1-9 Description Allows driver to fax jobs to be sent by the printer Note: Yes is the factory default setting. Specifies the dialing sound, either as a tone or a pulse Note: Tone is the factory default setting. Specifies the maximum speed in baud at which faxes are sent Note: 33600 baud is the factory default setting. Adjusts the amount of background visible on a copy Note: 0 is the factory default setting. Specifies the contrast of the output Note: "Best for content" is the factory default setting. Adjusts the amount of shadow detail visible on a copy Note: 0 is the factory default setting. Specifies if the original document is scanned edge-to-edge Note: Off is the factory default setting. Adjusts the sharpness of a fax Note: 3 is the factory default setting. Description Allows fax jobs to be received by the printer Note: On is the factory default setting. Specifies the number of rings before answering an incoming fax job Note: 3 is the factory default setting. Allows the printer to answer an incoming fax job Note: Yes is the factory default setting. Lets you enter a code on the telephone number pad to begin receiving a fax Notes: • This menu item is used when the printer shares a line with a telephone. • 9 is the factory default setting. Understanding printer menus 99