Lexmark X2670 User's Guide - Page 23

Warning-Potential Damage, Notes, Load up to, Make sure - paper jam

Page 23 highlights

Load up to 10 envelopes Make sure • The print side of the envelopes faces you. • The stamp location is in the upper left corner. • The envelopes are designed for use with inkjet printers. • The envelopes are loaded in the center of the paper support. • The paper guides rest against the edges of the envelopes. Warning-Potential Damage: Do not use envelopes that have metal clasps, string ties, or metal folding bars. Notes: - Do not load envelopes with holes, perforations, cutouts, or deep embossing. - Do not use envelopes that have exposed flap adhesive. - Envelopes require more drying time. Remove each envelope as it exits, and then allow it to dry to avoid ink smudging. 25 sheets of labels 50 transparencies • The print side of the label sheets faces you. • The top of the label sheets feeds into the printer first. • The adhesive on the labels does not extend to within 1 mm of the edge of the label sheets. • You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam. • The label sheets are loaded in the center of the paper support. • The paper guides rest against the edges of the label sheets. Note: Labels require more drying time. Remove each sheet of labels as it exits, and then allow it to dry to avoid ink smudging. • The rough side of the transparencies faces you. • If the transparencies have a removable strip, each strip faces away from you and down toward the printer. • The transparencies are loaded in the center of the paper support. • The paper guides rest against the edges of the transparencies. Notes: • Transparencies with paper backing sheets are not recommended. • Transparencies require more drying time. Remove each transparency as it exits, and then allow it to dry to avoid ink smudging. Loading paper and original documents 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Load up to
Make sure
10 envelopes
The print side of the envelopes faces you.
The stamp location is in the upper left corner.
The envelopes are designed for use with inkjet printers.
The envelopes are loaded in the center of the paper support.
The paper guides rest against the edges of the envelopes.
Warning—Potential Damage:
Do not use envelopes that have metal clasps,
string ties, or metal folding bars.
Notes:
Do not load envelopes with holes, perforations, cutouts, or deep
embossing.
Do not use envelopes that have exposed flap adhesive.
Envelopes require more drying time. Remove each envelope as it exits,
and then allow it to dry to avoid ink smudging.
25 sheets of labels
The print side of the label sheets faces you.
The top of the label sheets feeds into the printer first.
The adhesive on the labels does not extend to within 1 mm of the edge
of the label sheets.
You use full label sheets. Partial sheets (with areas exposed by missing
labels) may cause labels to peel off during printing, resulting in a paper
jam.
The label sheets are loaded in the center of the paper support.
The paper guides rest against the edges of the label sheets.
Note:
Labels require more drying time. Remove each sheet of labels as it exits,
and then allow it to dry to avoid ink smudging.
50 transparencies
The rough side of the transparencies faces you.
If the transparencies have a removable strip, each strip faces away from
you and down toward the printer.
The transparencies are loaded in the center of the paper support.
The paper guides rest against the edges of the transparencies.
Notes:
Transparencies with paper backing sheets are not recommended.
Transparencies require more drying time. Remove each transparency as
it exits, and then allow it to dry to avoid ink smudging.
Loading paper and original documents
23