Lexmark X2670 User's Guide - Page 24

Load up to 10 iron-on transfers 25 greeting cards 25 index cards 25 photo cards 25 postcards custom-size paper banner paper Make sure • You follow the loading instructions that came with the iron-on transfers. • The print side of the transfers faces you. • The transfers are loaded in the center of the paper support. • The paper guides rest against the edges of the transfers. Note: For best results, load transfers one at a time. • The print side of the cards faces you. • The cards are loaded in the center of the paper support. • The paper guides rest against the edges of the cards. Note: Photo cards require more drying time. Remove each photo card as it exits, and then allow it to dry to avoid ink smudging. • The print side of the paper faces you. • The paper size fits within these dimensions: Width: - 76.2-215.9 mm - 3.0-8.5 inches Length: - 127.0-355.6 mm - 5.0-17.0 inches • The paper is loaded in the center of the paper support. • The paper guides rest against the edges of the paper. • You remove all the paper from the paper support before loading the banner paper. • You tear off only the number of pages needed to print the banner. • You place the required stack of banner paper behind the printer, and then feed in the first sheet. • The leading edge of the banner paper feeds into the printer first. • The paper is loaded in the center of the paper support. • The paper guides rest against the edges of the paper. Loading paper and original documents 24