Lexmark X3350 Setup Sheet

Remove the sticker and tape

from the print cartridges.

8

1

2

1

2

1

2

3

Unpack your All-In-One.

Note:

Contents may vary based on geography.

1

Note:

You may need to purchase a USB

cable separately.

www.lexmark.com

3300 Series All-In-One

Connect the power cord to the power supply.

2

2

1

Lift the paper support and extend

the paper exit tray.

5

6

See the troubleshooting guide on the reverse of this sheet.

Make sure the power light is on.

3

Lift the scanner unit.

7

Close the scanner unit.

10

Your All-In-One may include a

photo cartridge instead of a

black print cartridge.

Before you continue, remove the

photo cartridge from the print

cartridge storage unit.

Note:

Save the print cartridge

storage unit to protect any open

cartridges not in use.

Press

to scroll to your language

and then press

.

4

1

Pull back the transparent deflector.

2

Load the paper flat and to the right.

3

Squeeze the paper guide. Slide it

to the right until it is snug.

1

Open the cartridge lids by pressing the front tabs.

2

Insert the cartridges and push them down firmly.

3

Snap

the lids tight.

9

Press

to print

an alignment page.

You may discard the page

after it prints.

11

Left:

photo

or

black

Right:

color

only

Steps 12–15

Safety information

CAUTION:

Do not set up this product or make any electrical or cabling connections, such as the power supply cord or

telephone, during a lightning storm.

•

Use only the power supply provided with this product or the manufacturer's authorized replacement power supply.

•

Connect the power supply cord to an electrical outlet that is near the product and easily accessible.

•

Refer service or repairs, other than those described in the user documentation, to a professional service person.

*23A0170*