Lexmark X464 Forms and Bar Code Technical Reference

Lexmark X464 Manual

Get Lexmark X464 PDF manuals and user guides View all Lexmark X464 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark X464 manual content summary:

  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 1
    Forms and Bar Code Card Technical Reference Manual March 2009 www.lexmark.com
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 2
    programs described may be made at any time. For Lexmark technical support, visit support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to the Internet, you can contact Lexmark by mail: Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 3
    Linotype-Hell AG and/or its subsidiaries Microsoft Corporation All other trademarks are the property of their respective owners. © 2009 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 4
    Visual Bar Code Designer 8 HP BarDIMM compatibility intercept 8 Supported Lexmark PCL5 & PostScript Bar Codes 8 Chapter 4: PCL5 emulation: HP 12 One-dimensional bar codes 12 Defining characteristics 12 Command structure considerations 12 Transparent print data command 13 Returning to normal
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 5
    for MaxiCode data 28 Chapter 5: PCL5 emulation: Lexmark 29 New PCL5 commands to support bar codes 29 Bar code descriptor ESC&x#W[descriptor data 29 Transfer bar code data ESC&y#W[bar code data 29 Compatibility safeguard 29 Lexmark symbology assignments 31 One-dimensional bar codes 32 Post
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 6
    on printer directory 100 Appendix A: Feature Summary 101 Appendix B: Supported Bar Codes 104 Appendix C: Forms Card Fonts 128 Single-Byte Forms Card Fonts 128 Double-Byte Forms Card Fonts 143 Appendix D: Forms Print Errors 144 Appendix E: Bar Code Engine Errors 148 Common error messages 148
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 7
    PostScript error messages 148 Errors common to all symbologies 149 String errors 149 Errors and Heights 155 PDF417 Image Widths and Heights 155 MaxiCode Capacity 156 Bar Code Horizontal Alignment 157 PDF417 Capacity 157 MaxiCode Separators and Structured Appends 157 Encoding Limits for
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 8
    menu options: - Print All Forms-Allows a user to print information about all formsets stored on a printer, as well as some printer-specific information. - Print • Support for UTF-8 formset filename encoding • Enhanced page delimeters • Ability to fax and e-mail merged output from supported printers •
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 9
    PCL5 and PostScript data • SAP R/3 device types and associated installation instructions • Some demonstration and test files • A Readme file that includes download information, requirements, and installation instructions Follow the instructions in the readme file located in the root directory of the
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 10
    and Bar Code Card installed, there are two techniques to specify bar codes for printing in PCL5: 1 Using standard PCL5 font selection commands (used in the HP BarDIMM Pro products) 2 Using special Lexmark advanced PCL5 commands for bar codes Most of the bar code symbologies supported by the Forms
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 11
    not. If required, compression is automatically performed prior to printing the bar code. Checksum calculation Some bar code symbologies define BarDIMM compatibility intercept The LexmarkTM Forms and Bar Code Card meets the function of the HP BarDIMM Pro version 3.3a option. Supported Lexmark PCL5
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 12
    • MSI Plessey + CHK10 + CHK10 • MSI Plessey + CHK11 + CHK10 • PLANET • RSS-14 • Singapore Post 4-state bar code • Swiss Postal • UCC-128 • UPC-A • UPC-A + 2 • UPC-A + 5 HP BarDIMM compatibility intercept 9
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 13
    MicroPDF417 • PDF417 • QR Lexmark-Unique PCL5 Command Description Support of new bar code remaining bytes are optional. If those bytes are not sent, the settings are set to appropriate defaults Compatibility Safeguard These two new commands, if sent to an HP printer, are flushed and nothing prints.
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 14
    of these commands and to ignore them in a bar code context. To avoid this conflict, use the PCL5 Lexmark enhancement switch. Setting or not setting this switch would allow a future Lexmark PCL5 emulation to decide which way to interpret the new escape sequences. The switch is a GL/2 command. HP
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 15
    Lexmark-specific section is found immediately following this section. One-dimensional bar codes With the Forms and Bar Code Card installed Characteristic Determines location of human-readable text printed with the bar code. Selects the code characteristic parameters and default values, see "PCL5
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 16
    selection command, where "•" is the character associated with decimal code 7 in the PC-8 symbol set Returning to normal text printing To ensure a proper return from bar code printing to normal text printing, PCL5 emulation escape sequences that generate bar codes must be immediately followed by an
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 17
    )s#P Function/Parameters Determines the location of human-readable text printed with the bar code. 0 = Use default value 1 = Do not print text 2 = Print text embedded 3 = Print text half embedded 4 = Print text under bar code 5 = Print text above bar code Add the numbers listed below
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 18
    Selects EAN/JAN-8 with automatically sized, CG Times Bold text. Because the v, p, b and s parameters are not specified, their values default to: v p b1, s1 b2, s2 b3, s3 b4, s4 .7 inch Print text half embedded .013 inch .027 inch .04 inch .053 inch Selects the height of the bar in points (1/72
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 19
    of 5 symbology with narrow bars 3 dots wide, and wide bars 9 dots wide. Because the v, p, s and h parameters are not specified, their values default to: v .4 p Do not print text s1 .01 inch s2 .03 inch h Not applicable because of #p parameter value Selects space widths in dots (1/600 inch
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 20
    1/72"; #b, s units are in 1/600") Selects the bar code symbology. Default parameters 1 AEC)s#T Typeface # Bar code symbology #v #p #b1, #b2, 124 10 30 - - N 13 Yes 1 For all bar code symbologies, the default value of the #H text font parameter is CBA = 000 (automatically sized Courier Bold).
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 21
    - 24704 Code 128 C 28.8 1 1 For all bar code symbologies, the default value of the #H text font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character. 3Checksum character is always printed if embedded text is specified. 6 12 18 24 M - * =
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 22
    24812 RSS-14 stacked 13 1 1 For all bar code symbologies, the default value of the #H text font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character. 3Checksum character is always printed if embedded text is specified. 8 16 24 32 N 13 * =
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 23
    1 For all bar code symbologies, the default value of the #H text font parameter is code (HP compatibility mode, using Lexmark bar code descriptor for Australia 4-State Postal bar codes (see the section "PCL5 emulation: Lexmark" on page 29 of this manual). Human-readable text is never printed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 24
    default is 1, which is C table) Function parameters for Singapore Post 4-State bar code (HP compatibility mode, using typeface 24780) In relation to the fields of the Lexmark of each successive bar is printed beginning one space width from does not produce an error message. If an invalid character
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 25
    print slashes or vertical bars. Esc(10U Esc(s0p4.5h0s0b4099T Esc&k2H///////// ///////// Esc&k2H||||||||| ||||||||| Selects PC-8 symbol set Selects 4.5 cpi fixed-space Courier font Prints symbol that can be scanned omnidirectionally by suitably programmed point-of-sale scanners. • RSS-14
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 26
    scanned omnidirectionally. Note: The RSS Stacked Omnidirectional bar code is not supported by the Forms and Bar Code Card. Field Name Esc (s#T Type name Range n/a Default There is no maximum value but larger barcodes may use up too much memory. 8,16,24,32 (dec) or 8,10,18,20 (hex) Description
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 27
    no max value but larger values will produce a symbol that will not fit on the page. 8,16,24,32 (dec) or 8,10,18,20 (hex) 0=Default 1=No HRT 2=Embedded 3=Half-Embedded 4=Under 0 (dec) or 00 (dec) Description Optional. Selects the width of the spaces. Optional. Defines the HRT Location. Note: HRT
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 28
    There is no max value for B1, but larger barcodes may use up too much memory. Description Required. 24840T Optional. Selects bar height. Bar height in 1/72", same units as fonts. Note: Values from 0 to 2 are the same as the default. Optional for Forms and Bar Code Card, required for HP BarDIMM. (See
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 29
    default line bar height. Specifying all 3 V parameters, using the "default" values for V1 and V3, and 2 rows looks like: • Esc(s16,2,20v24840T The Bar widths (B parameter) is documented by HP in their reference manual barcodes may use up too much memory. Description Required. 24820T Optional. Small
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 30
    Functional parameters for PDF417 (HP compatibility mode) Typeface Esc (s#T Value Default 24850T P parameter 0 Esc the #b parameter is not used to manually set rows and columns. 3 The default choice (0) sets the symbol to the to print PDF417 symbols. In relation to the fields of the Lexmark bar
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 31
    for QR Functional parameters for QR (HP compatibility mode) Typeface Esc (s#T P parameter Esc(s#P Default 0 B parameter 10 Esc(s#B S parameter for printing MaxiCode symbols will follow the same rules that exist for data sent using the Lexmark Transfer Bar Code Data command to print MaxiCode
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 32
    are required. The remaining bytes are optional. If those bytes are not sent, the settings are set to appropriate defaults. The number of bytes data is indicated by #. Compatibility safeguard These two new commands, if sent to an HP printer, are flushed and nothing prints. There is a possibility
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 33
    &y8W12345678 Two-dimensional PDF417: with ECC = 2, data = 12345678: ESC&x3W[00 01 02]ESC&y8W12345678 The general strategy for assigning new Lexmark symbology IDs and defining new Lexmark bar code descriptors is defined in the following table: Symbology ID 0-19 20-39 40-99 100-199 Type of symbology
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 34
    width in bar dimension units (#b4 parameter) Fourth space width in bar dimension units (#s4 parameter) Lexmark symbology assignments This table describes both new and existing Lexmark symbology assignments: Bar code type 2-D bar code 2-D bar code 2-D bar code 4-state postal 4-state postal 4-state
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 35
    bar code descriptors (Lexmark) Bar code descriptor for Australian Post 4-State bar codes Byte Field name Range Default value Description 0-1 Symbology hex) 22-25 (dec) 18 (hex) 24 (dec) Sets the number of bars that print per inch 4 Tracker Height 64-A0 (hex) 100-160 (dec) 82 (hex) 130
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 36
    Byte Field name Range Default value Description 3 Bar Pitch 14-18 (hex) 20-24 (dec) 16 (hex) 22 (dec) Sets the number of bars that print per inch 4 Tracker Height 66-98 (hex) 102 -152 (dec) 7F (hex) 127 (dec) Sets the tracker height in 1/100 mm 5 Ascender, A0-D8 (hex)
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 37
    16 (hex) 22 (dec) Sets the number of bars that print per inch 4 Tracker Height 66-98 (hex) 102-152 (dec Note: All seven code formats are supported. The format will be implied on Timing Bar Height 1.05a-1.35a 6-7 Long Bar Height 3.4a-3.6a Default value 00 17(hex) 23 (dec) 64 (hex) 100 (
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 38
    Byte Field name Range Default value Description 8-15 Reserved Notes on Japan Post data: • block and house number. Each of these hyphens, if included, is ignored. • Any hyphens included as part of the block and house number information are encoded as data in the bar code. • Invalid characters
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 39
    marking (FIM) Byte 0-1 2-15 Field name Symbology IDs Reserved Range Default value Description 00 28 (hex) Specifies USPS FIM The only valid in the data are ignored, and do not produce any error message. FIM symbols are printed according to the USPS specification. Bar height is fixed at 5/8
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 40
    1/720 inch units 02 8D (hex) #v parameter (in bar height units, see byte 653 (dec) 5) 02 (hex) Specifies units for bar and space widths: 0 = Use default value 1 = 1/300 inch units 2 = 1/600 inch units 3 = 1/1200 inch units 4 = 1/720 inch units 0B (hex) 11 (dec) All bar and space widths will be
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 41
    anywhere in the data; they are ignored. Three "." characters will be inserted automatically at the correct positions in the human-readable text printed with a Swiss Postal bar code symbol, separating the four components of the identification code. Invalid characters or lengths in the identification
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 42
    Bar Width #3 19 - 20 Space Width #3 21 - 22 Bar Width #4 23 - 24 Space Width #4 Default value 00 64 (hex) 03 (hex) 3 (dec) 00 (hex) 0 (dec) 00 (hex) bar height units, see byte 5) Specifies units for bar and space widths: 0 = Use default value 1 = (binary 0001) = 1/300 inch units 2 = (binary 0010) =
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 43
    of including it in the ISBN text printed with the symbol. The ISBN checksum digit is not verified or replaced by a calculation in the Forms and error message. Cursor positioning is handled the same as for other one-dimensional symbologies. If the Units bytes 5 or 8 are changed from their default
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 44
    Bar Width #3 19 - 20 Space Width #3 21 - 22 Bar Width #4 23 - 24 Space Width #4 Default value 00 65 (hex) 03 (hex) 3 (dec) 00 (hex) 0 (dec) 00 (hex) bar height units, see byte 5) Specifies units for bar and space widths: 0 = Use default value 1 = (binary 0001) = 1/300 inch units 2 = (binary 0010) =
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 45
    digit ISSN, followed by a two-digit price code, optionally followed by a two- printed with the symbol. The ISSN checksum digit is not verified or replaced message. Cursor positioning is handled the same as for other one-dimensional symbologies. If the Units bytes 5 or 8 are changed from their default
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 46
    39/128 Byte Field name 0-1 Symbology ID 2 HRT Location 3 HRT Typeface 4 HRT Style 5 Bar Height Units Type int int int int int Range Default value Description n/a n/a Required. • 00 70 (hex) or 112 (dec) specifies HIBC 39 PAS symbology • 00 71 (hex) or 113 (dec) specifies HIBC 39
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 47
    Width #1 (Code 128 bar 1, or Code 39 Narrow) 11-12 Space Width #1 (Code 128 space 1, or Code 39 Narrow) Type int int int int Range Default value Description 150-600 (dec) • 240 (dec) or • 00 F0 (hex) Optional. Corresponds to HP #v parameter in the specified Bar Height units. Note: Values that
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 48
    or • 00 (hex) Corresponds to the HP #h parameter. Note: When the value given is not within the defined range, the value will be set to default (Courier). 5=OCRB int 0=Regular • 2 (dec) Optional. 1=Italic 2=Bold 3=Bold Italic or • 02 (hex) Specifies the font style used for HRT. Note
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 49
    Byte 8 Field name Bar/Space Width Units 9-10 Bar Width #1 11-12 Space Width #1 13-14 Bar Width #2 (Wide) Type Range Default value Description int 0=default • 0 or 2 (dec) Optional. (1/600" units) or 1=1/300" units • 00 or 02 (hex) Specifies units for Bar and Space widths. 2=1/600"
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 50
    do not have to be specified. PLANET Codes Bytes 0-1 Field Name Type Symbology int int ID 2 Bar Pitch int Range n/a 20-24 (dec) Default (if not specified) • 128 (dec) or • 00 80 (hex) • 22 (dec) or • 16 (hex) Definition Required. Specifies PLANET symbology. Optional. Sets the X dimension
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 51
    Lexmark) Bytes 0-1 MSB LSB Range Symbology Symbology n/a ID byte 1 ID byte 2 (00x) (03x) 2-3 Reserved Units 0=Default descriptors must reserve the first two bytes for the symbology ID so the remaining bytes can be interpreted accordingly because most descriptors are of different sizes and
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 52
    default width of this element from the BCE is twice that of the X dimension. To set the Y dimension to default 0 (dec) Optional. or • 00 (hex) Manually set the number of symbol rows. Automatic operation specified for the symbology ID so the remaining bytes can be interpreted accordingly because
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 53
    width). Supported values are 01x for 300 dpi units, 02x for 600 dpi units, and 03x for 1200 dpi units. X Dimension, bytes 1 and 2: (Default = activates truncation. All other values disable truncation. Rows: (Default = 00x) This can be used to manually set the number of symbol rows. Both rows and
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 54
    , rows is set to 0, and the symbol requires 80 codewords, the symbol will be built with 8 rows (80 codewords / 10 columns). Columns: (Default = 00x) This can be used to manually set the number of symbol columns. Both columns and rows must be 00x if using aspect ratio. Valid non-zero values are
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 55
    This example prints a PDF417 bar code two bytes for the symbology ID so the remaining bytes can be interpreted accordingly, because most two bytes must be 00x and 02x. Mode: (Default = 02x) This field designates what mode to use message with numeric postal code Structured carrier message
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 56
    digits in length and thus padded with leading zeros if necessary. • The class of service must be 3 digits in length and thus padded with leading zeros if necessary. • For modes 2 and 3, an optional ANSI message header (for example, [)>RS01GSyy) can be inserted prior to the postal code. (RS = record
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 57
    on the input data. There is no method to explicitly specify any of the modes. The support of NULL (hex 00) characters is not supported at this time, due to possible issues with string termination within the printer. The basic block of the MicroPDF417 is the black or white "module," or rectangle. The
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 58
    clipped and set to the minimum and maximum values. To set the X dimension to default at 600 dpi requires a value of 9.45, which is specified as 945 (dec or 00 (hex) Optional. Manually set the number of symbol rows. Automatic operation specified by using 0. Manually set the number of symbol columns.
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 59
    the primary identification is readable by all scanning technologies, and so that 2D imagers can compatibility with linear- and area-CCD scanners, and with linear and rastering laser scanners. 4) the check digit. Normally the number system digit is printed just to the left of the bar code, the check
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 60
    Digit: The check digit is an additional digit used to verify that a bar code has been scanned correctly. Since a scan can produce incorrect data due to inconsistent scanning speed, print imperfections, or a host of other problems, it is useful to verify that the rest of the data in the bar code has
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 61
    the parity of the digits carries no particular significance, thus, EAN-8 has absolutely no compatibility with UPC-E. An EAN-8 bar code is a 2- or 3-digit number system code odd-parity characters. c First two message characters, encoded as left-hand odd-parity characters. Composite bar codes 58
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 62
    d Center guard bars, encoded as 01010. e Last three message characters, encoded as right-hand characters. f Check digit, encoded as right-hand character. g Right-hand guard bars, or end sentinel, encoded as 101. 4 EAN-13 (
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 63
    g Right-hand guard bars, or end sentinel, encoded as 101. The characters that are encoded to the left of the center guard pattern are considered the "left hand side" of the symbol; whereas, all characters encoded to the right of the center guard pattern are considered the "right hand side" of the
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 64
    scanned omnidirectionally by suitably programmed point-of-sale scanners scanned omnidirectionally by suitably programmed point-of-sale scanners. It can also be printed omnidirectional scanners. To the needed data capacity and they need >(s36b24810T01234567890123|Lexmark(s0p12h10vsb4099T
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 65
    RSS-14 Expanded Module Height (of int the linear component) Dependent on the Dependent on the Corresponds to HP #v parameter. module height default module range of the linear height of the linear component. component. Module Width (of int the linear component) Dependent on the Dependent on
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 66
    the value given is not within the defined range, the value will be set to default (Courier). The dimensions of the composite bar code may be varied in only two directions On option card On option card On option card In printer In printer In printer On option card On option card On option card On
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 67
    Not all systems are able to send binary data (non printing characters) to a printer. The FREESCAPE emulation feature provides a way for these and AEC within the same sequence of commands. The tilde character (~) is the default AEC. To set an AEC with a PCL5 sequence: Use either of the commands
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 68
    92 \ 123 { 124 | 125 } 126* ~ * Default value Example: Esc**124J changes the AEC to "|" FREESCAPE printer control panel: 1 From the Forms Card menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Forms Card menu, select Alt ESC Code Char. 4 Select an AEC from the menu
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 69
    are supported when a Forms and Bar Code Card is installed. These operators enable printing of messages" on page 148. There are certain command structure considerations to follow when implementing bar code applications using the Forms and Bar Code Card. Characteristic values, other than the default
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 70
    format. The incoming data is analyzed to determine if it is compressed or not, and if required, compression is automatically performed prior to printing the bar code. Checksum calculation Some bar code symbologies define checksum characters as a requirement of the data format. When this is the case
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 71
    bar code will be used. The value used for height will be the default, 620. The values for bars and spaces will also be the defaults, [8 16 24 32]. The /Special key defaults to false, so the checksum will be printed at the bottom left of the bar code. For the UPC-A symbology, the
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 72
    if shown. The value used for height will be the default, 240. The values for bars and spaces will also be the defaults, [6 18]. The /Special key does not apply to the checksum character always prints when embedded text is specified so /PrintCheckChar is irrelevant. PostScript emulation operator 69
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 73
    for / EmbedText key" on page 75. [array] used by ISSN and ISBN only /FontName name Optional, see "Values for /FontName key" on page 75; default is Courier-Bold /Pitch [int] Optional, used only by PostNet5, PostNet9, and PostNet11 bar codes. Allowed values are 20 through 24. Values less than
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 74
    checksum at middle left of the bar code Code 3 of 9, default is false: • if false, does not print start/stop * characters with text • if true, prints start/stop * characters with text French1 and German postal, default is true: • if false, does not format embedded text for bar code • if true
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 75
    420 3 8 16 24 32 N 12 /EAN-13 EAN/JAN-13 620 3 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional hyphens
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 76
    MSI with mod10 and 240 1 6 12 18 24 N Yes mod10 check digits 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 77
    420* 4 9 27 2 of 5 N 10 /USPS-zebra USPS Zebra code 225* 1* 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 78
    parameter 0 /NoText 1 /Embedded 2 /HalfEmbedded 3 /Under 4 /Above 5 Definition Use symbology dependent default parameter, see "Values for / Symbology key" on page 72. Do not print text. Print text embedded. Print text half embedded. For ISBN and ISSN, this value is not allowed as the
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 79
    /FontName /CG-Times-BoldItalic /OCR-B Example: /FontName /Courier Font attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN and ISSN bar codes are normally 10 digits in length (see the PCL5 section above for a complete description), but they have "
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 80
    Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the tracker height in 1/100 mm Sets the ascender and descender ) /Ascender, 160-216 (dec) Descender Offset /QuietZone /Units [int int] Default value /SingaporePostal 50 (dec) [integer] 22 (dec) [integer] 127 (dec
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 81
    Symbology identification Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the tracker height in 1/100 mm Sets the ascender and descender = 100, the range for this value is 50 to 70 with the default setting being 60. If the value is set outside the valid range, the
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 82
    Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height in 1/100 mm Sets the upward Height of bars Specifies units used for /BarWidth and / SpaceWidth dimensions: 0 = Use default value 1 = 1/300 inch units 2 = 1/600 inch units 3 = 1/1200 inch
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 83
    Key /QuietZone /Units Range [int int] Default value [150 150] [array of integers] Description Same as the other bar codes, in /Units (optional) 1/600 inch (optional) /BarHeight must be: • greater than or
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 84
    /Units /Height name int /Bars [int] /Spaces [int] /EmbedText name Range Default value Description n/a n/a Required. /HIBC128PAS /HIBC128SLS /HIBC39PAS /HIBC39SLS /300ths /600ths / /HalfEmbedded Optional. Defines if and where the HRT is to be printed. Two-dimensional bar codes 81
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 85
    • Values for / FontName key /Courier-Bold Optional. Defines how the HRT is to be printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 86
    Ther is no maximum value, but larger bar codes may use up too much memory. • 756 (dec) or • 02 F4 (hex) Optional. Note: Values (dec) or • [00 0C] (hex) Note: The default value for Bar Width 2 is dependent on the value of Bar Width 1, where Default = 2.50 x Bar Width 1 Optional. Note: Values that
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 87
    int] PLANET Codes Key /Symbology Type name /Pitch int /QuietZone [int int] Range Default value Description /NoText /Under /Above /NoText Optional. Defines if and where the HRT is to be printed. See these sections: • Values for / EmbedText key • Values for / FontName key /Courier-Bold
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 88
    /Rows integer /Columns integer /AspectRatio real /Units /ModuleWidth integer /Height integer Default Value Definition Required (/PDF417); signifies the bar code symbology Required; 0 for /Rows and /Columns set manually or 1 for /Rows and /Columns determined by /AspectRatio Required if /Type
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 89
    "/ Error Percent" on page 86. Optional; not supported Optional; not supported false Optional; default is false (no truncation) If true, right row because it is closest to 20 x 0.35, or 7. This example will print a PDF417 bar code with the following settings: Sample01234
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 90
    element width in 600th units %smallest element width = 20/600ths %bar height = 40/600ths %number of error code words = 8 %because they are not specified, /Truncated defaults to %false (no ;truncation) and / QuietZone defaults to [150 150] Arguments for PDF417 bar code symbology 87
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 91
    supported is 1 Arguments for MaxiCode bar code symbology Key /Symbology /Mode /QuietZone Range 02-06 (dec) Default value /MaxiCode 02 (dec) Description Symbology identification 02 = Structured carrier message code, country code, and class of service. Each field must be terminated with either
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 92
    is a two-digit year). This message is automatically moved to the secondary message. Neither a group separator nor a comma should terminate this message. An optional secondary message follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message follows the number-of-labels field
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 93
    black rectangle) in 100th of an inch. To set the X dimension to "default" at 600 DPI requires a value of 9.45, which is specified here as white or black rectangle) in 100th of an inch. To set the Y dimension to "default" at 600 DPI requires a value of 18.9, which is specified here as 1890 decimal.
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 94
    • Values for / FontName key /Courier-Bold Optional. Defines how the HRT is to be printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 95
    Dependent on the Optional. module height range of the linear component. default module height of the linear component. Sets the Y dimension of the sequence. For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data begins with
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 96
    is to be printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/ Courier-Bold) . For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data begins with
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 97
    is available only on MFPs that support e-mail and/or fax. 3 Select ports that the Forms Card listens to Users can now select which of the printer input ports that the Forms Card will listen to and perform merging on. This is accomplished through a new menu item called Print Port Setting: • If a port
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 98
    Support Through LFJT (Lexmark Forms Job Ticket) support, the Forms Card now allows users to specify RFID printer options when printing a merged e-form. LFJT is a simple XML format for specifying those options. The LFJT is embedded into the merged PDF by the Forms Card firmware then the Paper Tray and
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 99
    all PCL5 emulation escape sequences and leaves the text data Removes all ZPL escape sequences and leaves the text data Performs the same actions as the ZPL filter, except uses the '@' as the "format instruction" prefix Forms Card font support Not all fonts are recognized by the Forms and Bar
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 100
    Card Fonts" on page 128 identifies all supported/recognized fonts and the font file used by the Forms and Bar Code card. Bubble font This font is typically used for standardized testing forms that are optically read for grading purposes. It is available in Lexmark Forms Composer when the font "OCRB
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 101
    Bubble font 98
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 102
    pages and fonts is excessive. Because the user's computer font list is richer than that of the printer, a user could easily create a form where not all characters will print. This Technical Reference cannot define what is standard and non-standard, as those definitions change for each geographic
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 103
    files on printer directory The Forms and Bar Code Card places forms files on the printer in the "formsmerge" directory. These files will be visible if the user performs a Print Directory from the printer menu. These files must not be tampered with in any way. Forms files on printer directory 100
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 104
    supported on various Lexmark products: Forms and Bar Code Card Forms Card Filters PCL5 Filter Y Optra FormsTM Init String Y • Supports multiple init strings Y • Removes Y Y 1 Supported when the printer control panel is set to a DBCS language. 2 Limited UTF-8 and UTF-16 support (no Asian
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 105
    Sel. Fax form output (MFP feature) Y NA Y NA E-mail form output (MFP Y NA Y NA feature) System variables in formset • PRINTNAME (Printer name) Y Y NA NA • PRINTNUM (Printer Serial Y number) Y NA NA Save Variable for reuse Y Y Y NA 1 Supported when the printer control
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 106
    NA NA NA Combined Forms & Bar Code Y CD NA NA NA Updated Visual Bar Code Y Designer v3.0 NA NA NA Alternate Escape Code Y Y • PLANET Y Y Y 1 Supported when the printer control panel is set to a DBCS language. 2 Limited UTF-8 and UTF-16 support (no Asian fonts or file names, etc
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 107
    FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These Bar Codes not
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 108
    Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 109
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Code 93 supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 110
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Code 128 supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 111
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name HIBC128, supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 112
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Interleaved supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 113
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Matrix 2 supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 114
    LDSS Document Producer Lexmark Optra FormsTM Bar capacity 2D matrix bar code symbology especially designed for the high-speed scanning application of package sorting and tracking. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 115
    Document Producer Lexmark Optra FormsTM Bar PDF417's maximum data capacity. A limited set supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 116
    LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name QR Y supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 117
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Composite supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 118
    FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These Bar Codes not
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 119
    FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These Bar Codes not
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 120
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name EAN/JAN supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 121
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name EAN/JAN supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 122
    Document Producer Lexmark Optra FormsTM part by a 2-digit price code. The installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 123
    Producer Lexmark Optra facilitates omnidirectional scanning. It encodes installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 124
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name UPC-A supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 125
    LDSS Document Producer Lexmark Optra FormsTM Bar the product identification part of the bar supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 126
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Postal Bar supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 127
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Sample supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 128
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Sample supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 129
    Producer Lexmark Optra FormsTM United States Postal Service (USPS) canceling installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 130
    Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 131
    C Forms Card Fonts Single-Byte Forms Card Fonts The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms card. Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 132
    Font name AntiqueOliveCE-Roman AntiqueOlive-Compact AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 133
    Font name AvantGardeCE-DemiOblique AvantGarde-Demi AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 134
    Font name CenturySchlbk Roman CenturySchlbk-Bold CenturySchlbk-BoldItalic CenturySchlbk-Italic CenturySchlbk-Roman CG Omega (W1) CG Times (W1) CG Times (W1) Bold CG Times (W1) Bold Italic CG Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 135
    Font name CGOmega-BoldItalic CG-Omega-BoldItalic CGOmega-Italic CG-Omega-Italic CGTimes CG-Times CGTimes-Bold CG-Times-Bold CGTimes-BoldItalic CG-Times-BoldItalic CGTimes-Italic CG-Times-Italic Chicago ChicagoCE Clarendon Clarendon Condensed (W1) Clarendon Light Clarendon-Bold ClarendonCE
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 136
    Font name Coronet-Regular Courier Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 137
    Font name Garamond (W1) Kursiv Garamond (W1) Kursiv Halbfett Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 138
    Font name Goudy-BoldItalic Goudy-ExtraBold Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 139
    Font name Helvetica-Condensed-Oblique Helvetica-Italic Helvetica-Light Helvetica-Light Italic Helvetica-LightOblique Helvetica-Narrow Helvetica-Narrow Bold Helvetica-Narrow Bold Italic Helvetica-Narrow Italic Helvetica-Narrow-Bold Helvetica-Narrow-BoldItalic Helvetica-Narrow-BoldOblique Helvetica-
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 140
    Font name Intl-Courier-Oblique Intl-Univers-Bold Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 141
    Font name LubalinGraphCE-BookOblique LubalinGraphCE-Demi LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 142
    Font name Optima-Italic Oxford Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Palatino-Bold Palatino-BoldItalic PalatinoCE-Bold PalatinoCE-BoldItalic PalatinoCE-Italic PalatinoCE-Roman Palatino-Italic Palatino-Roman RomanPillar RomanPillar Bold RomanPillar BoldItalic RomanPillar
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 143
    Font name Tekton Times New Roman Times New Roman Bold Times New Roman Bold Italic Times New Roman Italic Times-Bold Times-BoldItalic TimesCE-Bold TimesCE-BoldItalic TimesCE-Italic TimesCE-Roman Times-Italic TimesNewRoman TimesNewRoman-Bold TimesNewRoman-BoldItalic TimesNewRoman-BoldItalicTT
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 144
    Font name Univers (WE) Univers (WE) Bold Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 145
    Font name UniversCE-Condensed UniversCE-CondensedBold UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 146
    Double-Byte Forms Card Fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 147
    Forms printing error codes and suggested solutions. Error Message Act condition string malloc failed. BuildLineList failed. Cannot open archive file. Error Type Insufficient memory Internal or memory error Archive file Cannot select deafult Unicode font: SimSun. Font Error Cannot select default
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 148
    printer. Add memory to printer. Add memory to printer. Add memory to printer. User or internal error Download formsets. Contact Lexmark Service. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Missing or corrupt file download formsets again. Forms Print
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 149
    Lexmark Service. PJC File Missing or corrupt file download formsets again. PJC File Missing or corrupt file download formsets again. Out of memory Add memory to printer. Insufficient memory Add memory to printer. Insufficient memory Add memory to printer. Insufficient memory Add memory
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 150
    XML file missing required element: %s Error Type LFM File Insufficient memory XML Error XML Error Solution Missing or corrupt file download formsets again. Add memory to printer. Possible corrupt file download formsets again. Possible corrupt file download formsets again. Forms Print Errors 147
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 151
    : 12 Invalid Character PostScript error messages To assist with troubleshooting, the Forms and Bar Code Card generates error messages when an invalid bar code condition occurs. PostScript error reporting must be enabled on the printer for these messages to be printed out. If an error occurs during
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 152
    code Type Unknown bar code ID Unknown bar code Type or ID Fonts not loaded Not enough memory String errors String errors result from bad input data and represent the most commonly encountered errors. red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common error messages 149
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 153
    FIM X X USPS Sack X X Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common error messages 150
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 154
    number too long Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common error messages 151
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 155
    Too many rows Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common error messages 152
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 156
    as "HP BDP"), or the Lexmark Bar Code Card version 2.5. ( scan contains only uppercase. However, the HRT is printed support lowercase "a-z" character input, and does not translate to uppercase, and is operating per the specs at the URLs noted above. Therefore, the Forms and Bar Code Card firmware
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 157
    does not support lowercase "a-z" memory for a requested bar code on a per-symbology basis. It does not "malloc" memory the scan may no warning or guide, not an absolute definition of capability, and could change upward or downward depending on these assumptions: • the amount of RAM in the printer
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 158
    and descenders are used, and the bar code scans correctly with a verifier. A change in the BCE to address this minor difference may be implemented in a later version. Note: Exact size compatibility of certain 4-state bar code image sizes with previous Lexmark bar code options is not assured. However
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 159
    size compatibility of certain PDF417 bar code images with previous Lexmark bar code options is not assured. However, the bar code will still scan correctly. If users were to change to other printing equipment that did not tolerate a marginally higher capacity, their process would be broken. Also
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 160
    be allowed and truncated by firmware before the BCE is called. The remaining maximum data should be safely were to change to other printing equipment that did not tolerate a marginally higher capacity, their process would be here: • http://lemming.sa.ap.lexmark.com/weblog/2007/04/03#BarCodeSpecs
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 161
    Technical Reference manual ver 2.4b, and the HP BarDIMM Technical Reference manual from 3.0 combined bar code series. The SuchyMIPS BCE does support Structured Appends, and so does HP BDP. That 6 for a separator character If they are found, remove them, and pass the 4 Structured Append bytes and the
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 162
    If the 4-byte Structured Append is specified alone, then the Forms and Bar Code Card should print a valid MaxiCode symbol that is empty (no data). Depending on the scanner used, it may not produce a valid scan. If an old-style 3-byte Structured Append is specified alone, then the Forms and Bar Code
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 163
    Encoding Limits for barcodes This deviation concerns firmware-imposed limits on certain bar codes. Err: 15 String too Short error message is generated. Postcript barcodepath Operator The Postscript operator barcodepath does not work as on previous Lexmark Bar Code options. The barcodepath operator
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 164
    to Forms Manager will result in one of two scenarios: • If the printer's Print PS Error setting is turned on, then an error page will print and the job will be flushed. The printer will then return to Ready state. • If the printer's Print PS Error setting is turned off, then the job will be flushed
  • Lexmark X464 | Forms and Bar Code Technical Reference - Page 165
    www.lexmark.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
www.lexmark.com
March 2009
Forms and Bar Code Card
Technical Reference Manual