Lexmark X466 Forms and Bar Code Technical Reference

Lexmark X466 Manual

Get Lexmark X466 PDF manuals and user guides View all Lexmark X466 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark X466 manual content summary:

  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 1
    Forms and Bar Code Card Technical Reference Manual March 2009 www.lexmark.com
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 2
    changes in the products or the programs described may be made at any time. For Lexmark technical support, visit support.lexmark.com. For information on supplies and downloads, visit www.lexmark Computer, Inc. The Monotype Corporation plc Linotype-Hell AG and/or its subsidiaries Jonathan Hoefler Type
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 3
    the property of their respective owners. © 2009 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 4
    calculation 8 Visual Bar Code Designer 8 HP BarDIMM compatibility intercept 8 Supported Lexmark PCL5 & PostScript Bar Codes 8 Chapter 4: PCL5 emulation: HP 12 One-dimensional bar codes 12 Defining characteristics 12 Command structure considerations 12 Transparent print data command 13
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 5
    39/128 43 ITF-14 ...45 PLANET Codes 47 Two-dimensional bar codes 48 Bar code descriptor for PDF417 (Lexmark 48 Bar code descriptor for MaxiCode 52 Bar code descriptor for MicroPDF417 53 Composite bar codes 56 PCL Specifications for composite bar codes 62 Fonts ...63 FREESCAPE emulation 64
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 6
    card 94 New features 94 Data types ...95 Data filters ...96 Forms Card font support 96 Bubble font 97 Determine printable characters 99 Printing errors 99 Forms files on printer directory 100 Appendix A: Feature Summary 101 Appendix B: Supported Bar Codes 104 Appendix C: Forms Card Fonts
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 7
    PostScript error messages 148 Errors common to all symbologies 149 String errors 149 Errors specific to symbologies 151 Appendix F: Deviations 153 Code 93 uppercase vs. lowercase 153 Codabar uppercase vs. lowercase 153 Maximum encodable character length 154 Four-state Postal Widths 155 HRT
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 8
    Composite • Vertical text centering • Support for UTF-8 formset filename encoding • Enhanced page delimeters • Ability to fax and e-mail merged output from supported printers • Ability to use formsets stored on a USB flash drive for FormsMerge operations • RFID support on the Forms Card • Expanded
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 9
    : • Forms and Bar Code Card User's Guide • Visual Bar Code Designer, a software utility that puts most of this document's detail into a user-friendly bar code design graphical interface to easily generate PCL5 and PostScript data • SAP R/3 device types and associated installation instructions • Some
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 10
    by technique 2, and some are accessible by both techniques. Cursor positioning Cursor positioning is set as follows when printing with the Forms and Bar Code Card: • From the current cursor position, bar code printing begins at the bottom left corner of the left bar. • The cursor is located
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 11
    to printing the bar code. Checksum calculation Some bar code symbologies Supported Lexmark PCL5 & PostScript Bar Codes The following is a list of supported one-dimensional bar codes: • Australian Post 4-state bar code (37-CUST, 52-FF-MET, and 67-FF-MET) • British Royal Mail 4-state customer code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 12
    5 with check digit • Industrial 2 of 5 • Industrial 2 of 5 with check digit • ISBN • ISBN+5 • ISSN • ISSN+2 • ISSN+5 • ITF-14 • Japan Post 4-state bar code • Matrix 2 of 5 • Matrix 2 of 5 with check digit • MSI Plessey • MSI Plessey + CHK10 • MSI Plessey + CHK10 + CHK10 • MSI Plessey + CHK11 + CHK10
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 13
    Lexmark-unique PCL5 definitions that provide access to the new functionality. Two new commands are implemented, ESC&x#W and ESC&y#W. Bar Code Descriptor - ESC&x#W [descriptor data] This new escape sequence is used to describe not only what bar code to print, but also all of the parameter settings
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 14
    to honor the HP versions of these commands and to ignore them in a bar code context. To avoid this conflict, use the PCL5 Lexmark enhancement switch. Setting or not setting this switch would allow a future Lexmark PCL5 emulation to decide which way to interpret the new escape sequences. The switch
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 15
    of human-readable text printed with the bar code. Selects the font used for human-readable text. Selects bar heights. Selects bar widths. Selects space widths. For more information on bar code characteristic parameters and default values, see "PCL5 Function parameter list" on page 17. Command
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 16
    , where "•" is the character associated with decimal code 7 in the PC-8 symbol set Returning to normal text printing To ensure a proper return from bar code printing to normal text printing, PCL5 emulation escape sequences that generate bar codes must be immediately followed by an escape sequence
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 17
    /Parameters Determines the location of human-readable text printed with the bar code. 0 = Use default value 1 = Do not print text 2 = Print text embedded 3 = Print text half embedded 4 = Print text under bar code 5 = Print text above bar code Add the numbers listed below to produce the
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 18
    bar code symbologies) Letter Gothic Univers Univers Condensed CG-Times OCR-B Example: Esc(s304h24620T Selects EAN/JAN-8 with automatically sized, CG Times Bold text. Because the v, p, b and s parameters are not specified, their values default to: v p b1, s1 b2, s2 b3, s3 b4, s4 .7 inch Print text
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 19
    24,32s8,16,24,32b24700T Selects Code 128 autoswitch with text printed under the bar code, space widths set to 8, 16, 24 and 32 dots and bar widths set to 8, 16, 24 and 32 dots. Because the v and h parameters are not specified, their values default to: v .4 h automatically sized Courier Bold One
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 20
    , the default value of the #H text font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character. 3Checksum character is always printed if embedded text is specified. * = Fixed value, cannot be changed N = Numeric M = Mixed One-dimensional bar codes 17
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 21
    For all bar code symbologies, the default value of the #H text font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character. 3Checksum character is always printed if embedded text is specified. 6 12 18 24 M - * = Fixed value, cannot be changed N = Numeric
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 22
    all bar code symbologies, the default value of the #H text font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character. 3Checksum character is always printed if embedded text is specified. 8 16 24 32 N 13 * = Fixed value, cannot be changed
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 23
    field byte 7 of the Lexmark bar code descriptor for Australia 4-State Postal bar codes (see the section "PCL5 emulation: Lexmark" on page 29 of this manual). Human-readable text is never printed with these bar codes. In relation to the fields of the Lexmark bar code descriptor for Australia 4-State
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 24
    default is 1, which is C table) Function parameters for Singapore Post 4-State bar code (HP compatibility mode, using typeface 24780) In relation to the fields of the Lexmark bar code each successive bar is printed beginning one space width from does not produce an error message. If an invalid
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 25
    each group separated by nine spaces. Bar code descriptor for RSS-14 RSS-14 is a linear symbology that encodes the full 14-digit EAN/UCC item identification in a linear symbol that can be scanned omnidirectionally by suitably programmed pointof-sale scanners. The Reduced Space Symbology (RSS) family
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 26
    bar code is not supported by the Forms and Bar Code Card. Field Name Esc (s#T Type name Range n/a Default (if not specified) n/a Esc(s#V int Esc(s#1,#2,#3,#4B int Min: 3 (dec) or 03 (hex) Max: There is no maximum value, but larger barcodes may use up too much memory. Standard
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 27
    not fit on the page. 8,16,24,32 (dec) or 8,10,18,20 (hex) 0=Default 1=No HRT 2=Embedded 3=Half-Embedded 4=Under 0 (dec) or 00 (dec) Description Optional HP BarDIMM and also with the Forms and Bar Code Card. Setting S1 to any value does not affect the bar code like it does with B1. The S parameter
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 28
    bar codes Bar code descriptor for Codablock F Field Name Esc (s#T Type name Range na Default (if memory. Description Required. 24840T Optional. Selects bar height. Bar height in 1/72", same units as fonts. Note: Values from 0 to 2 are the same as the default. Optional for Forms and Bar Code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 29
    BarDIMM. The B3 and B4 parameters are not used. The PCL S "Space" is not parsed or used by HP. Bar code descriptor for Data Matrix Field Name Esc (s#T Esc(s#1B Type name Range n/a Default (if not specified) n/a int Min: 10 (dec) Min. value is 1, but the or module will be too small to
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 30
    time. If both types of parameters appear in a bar code selection escape sequence, the type appearing last in the sequence is used to select symbol size. 2 Aspect ratio values are used if the #b parameter is not used to manually set rows and columns. 3 The default choice (0) sets the symbol to the
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 31
    Kanji character set (shifted JIS) Bar code descriptor for MaxiCode data The data sent when using this technique for printing MaxiCode symbols will follow the same rules that exist for data sent using the Lexmark Transfer Bar Code Data command to print MaxiCode symbols, with the following change to
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 32
    new Lexmark-unique PCL5 definitions that provide access to the new functionality. Two new commands are implemented, ESC&x#W and ESC&y#W. Bar code descriptor ESC&x#W[descriptor data] This new escape sequence is used to describe not only what bar code to print, but all of the parameter settings
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 33
    x3W[00 01 02]ESC&y8W12345678 The general strategy for assigning new Lexmark symbology IDs and defining new Lexmark bar code Type of symbology Two-dimensional symbologies 4-State bar codes Miscellaneous symbologies One-dimensional bar codes For new one-dimensional bar codes, the Lexmark bar code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 34
    code type 2-D bar code 2-D bar code 2-D bar code 4-state postal 4-state postal 4-state postal 4-state postal 4-state postal Miscellaneous symbology 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code 1-D bar code ID (hex) ID (dec) Symbology 00
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 35
    bar code descriptors (Lexmark) Bar code descriptor for Australian Post 4-State bar codes Byte Field name Range Default value Description 0-1 Symbology ID 00 14 (hex) Selects Australian post 4-State symbology 20 (dec) 2 Bar Width 28-3C (hex) 40-60 (dec) 32 (hex) 50 (dec) Sets the bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 36
    Byte Field name Range Default value Description 3 Bar Pitch 14-18 (hex) 20-24 (dec) 16 (hex) 22 (dec) Sets the number of bars that print per inch 4 Tracker Height 66-98 (hex) 102 -152 (dec) 7F (hex) 127 (dec) Sets the tracker height in 1/100 mm 5 Ascender, A0-D8 (hex) Descender
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 37
    for RM4SCC British Royal Mail 4-State customer code symbol Byte Field name Range Default value Description 0-1 Symbology ID 00 16(hex) Selects British Royal Mail 4-State customer 22 (dec) code symbology 2 Bar Width 26-3F (hex) 38-63 (dec) 32 (hex) 50 (dec) Sets the bar width in 1/100 mm
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 38
    name Range Default value Description 8-15 Reserved Notes on Japan Post data: • Data will consist of a 7-digit postal code number, part of the block and house number information are encoded as data in the bar code. • Invalid characters or lengths in the postal code will be flagged with an error
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 39
    code Byte Field name Range Default value Description 0-1 Symbology ID 00 18(hex) Selects Dutch Post 4-State symbology 24 (dec) 2 Bar Width 26-3F (hex) 38-63 (dec) 32 (hex) 50 (dec) Sets , and do not produce any error message. FIM symbols are printed according to the USPS specification. Bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 40
    18 Bar Width #3 19 - 20 Space Width #3 21 - 22 Bar Width #4 23 - 24 Space Width #4 25-31 Reserved Default value Description 00 66 (hex) Selects Swiss Postal symbology 102 (dec) 04 (hex) 4 (dec) #p parameter 02 (hex) 2 (dec) #h module widths greater than 0.45 mm One-dimensional bar codes 37
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 41
    code, which is composed of: • a 2-digit post code, • a 2-digit billing district code, • a 6-digit customer printed with a Swiss Postal bar code symbol, separating the four components of the identification code. Invalid characters or lengths in the identification code will be flagged with an error
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 42
    Default value 00 64 (hex) 03 (hex) 3 (dec) 00 (hex) 0 (dec) 00 (hex) 0 (dec) 04 (hex) 00 4A (hex) 74 (dec) 02 (hex) 00 08 (hex) 8 (dec) 00 08 (hex) 8 (dec) 00 10 (hex) 16 (dec) 00 10 (hex) 16 (dec) 00 18 (hex) 24 (dec) 00 18 (hex) 24 (dec) 00 20 (hex) 32 (dec) 00 byte 8) One-dimensional bar codes 39
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 43
    assume new dimensions, based on the new units. In other words, the parameters are in "units", and if the "units" measurements change, so does the physical printed bar code. If any of the parameters are set to 0 (zero), then the default value assigned in the table is assumed. One-dimensional bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 44
    Default value 00 65 (hex) 03 (hex) 3 (dec) 00 (hex) 0 (dec) 00 (hex) 0 (dec) 04 (hex) 00 4A (hex) 74 (dec) 02 (hex) 00 08 (hex) 8 (dec) 00 08 (hex) 8 (dec) 00 10 (hex) 16 (dec) 00 10 (hex) 16 (dec) 00 18 (hex) 24 (dec) 00 18 (hex) 24 (dec) 00 20 (hex) 32 (dec) 00 byte 8) One-dimensional bar codes 41
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 45
    assume new dimensions, based on the new units. In other words, the parameters are in "units", and if the "units" measurements change, so does the physical printed bar code. If any of the parameters are set to 0 (zero), then the default value assigned in the table is assumed. One-dimensional bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 46
    Type int int int int int Range Default value Description n/a n/a Required. • 00 70 (hex) or 112 (dec) specifies HIBC 39 PAS symbology • 00 Roman 5=OCRB • 0 (dec) or • 00 (hex) Optional. Corresponds to the HP #h parameter. 0=Regular 1=Italic 2=Bold (default) 3=Bold Italic • 2 (dec) or •
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 47
    (Code 128 space 1, or Code 39 Narrow) Type int int int int Range Default value Description 150-600 (dec) • 240 (dec) or • 00 F0 (hex) Optional. Corresponds to HP #v parameter in the specified Bar Height units. Note: Values that go beyond the defined range will be appropriately clipped and set
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 48
    Type Range Default value Description int int n/a • 103 (dec) or • 00 67 (hex) Required. Specifies ITF-14 symbology. int 0=Default • 0 or 1 (dec) Optional. (No HRT) 1=No HRT 4=Under or • 00 set to the minimum value. The default BCE ITF-14 Bar Height is 1.25984 inches. If byte 5 is default 00
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 49
    Type Range Default value Description int 0=default • 0 or 2 (dec) Optional. (1/600" units) or 1=1/300" units • 00 set to the minimum and maximum values. The default bar code engine ITF-14 narrow space width is 0.02 inches. If byte 5 is default 00 (600 dpi), then the Space Width (Narrow) is 00
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 50
    range will be appropriately clipped and set to the minimum and maximum values. - - - These do not have to be specified. PLANET Codes Bytes 0-1 Field Name Type Symbology int int ID 2 Bar Pitch int Range n/a 20-24 (dec) Default (if not specified) • 128 (dec) or • 00 80 (hex) • 22 (dec) or
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 51
    minimum and maximum values. To set the X dimension to default at 600 dpi requires a value of 9.45, which is specified as 945 (dec) or 03 B1 (hex). The Units enumeration would be set to 02 (hex) (or 00 (hex)), and these two bytes would be 03 (hex) and B1 (hex). Two-dimensional bar codes 48
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 52
    and set to the minimum and maximum values. Sets the Y dimension of the module (white or black rectangle) in one-hundredths of an inch. The default width ) Columns: 1-4 (dec) • 0 (dec) Optional. or • 00 (hex) Manually set the number of symbol rows. Automatic operation specified by using 0. See
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 53
    error code words 2 4 8 16 32 64 128 256 512 ECC can also be specified as a percentage. A valid non-zero ECC by Percentage will override ECC by Predetermined Value. See "ECC by percentage, bytes 1 and 2: (Default = 0000x)" on page 51. Units Enumeration for X Dimension: (Default = 02x) This byte sets
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 54
    10 columns). Columns: (Default = 00x) This can be used to manually set the number of symbol columns. , the ECC level will be computed by selecting one of the predetermined error code words). For the same 20 data code words, and an ECC percentage specified at 35% (0023x), ECC level 2 (8 error code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 55
    02x 03x 04x 05x 06x Description Structured carrier message with numeric postal code Structured carrier message with alphanumeric postal code Standard symbol with standard error correction Full symbol with enhanced error correction Reader program with standard error correction Two-dimensional bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 56
    prior to the postal code. (RS = record separator, ASCII 30; yy is a two-digit year) This message is automatically moved to the secondary message. Neither a group separator nor a comma should terminate this message. An optional secondary message follows the class of service for modes 2 and 3. For
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 57
    accordingly because most descriptors are of different sizes and information. 0 or 2 (dec) or 00 or 02 (hex) Optional. Sets the units used in specifying any further parameters or dimensions. The default value is 1/ 600", which is either 00 (hex) or 02 (hex). Bar code descriptor for MicroPDF417 54
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 58
    of this element from the bar code engine is twice that of the X-dimension. To set the Y-dimension to default at 600 dpi requires a value of 18.9, which is specified as 1890 (dec) or 07 62 (hex). The Units enumeration would be set to 02 (hex) (or 00 (hex)), and these two bytes would be
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 59
    by all scanning technologies, and scanners, and with linear and rastering laser scanners. The following bar codes code, and the manufacturer and product codes are printed just below the bar code, as observed above. a Number System: The number system is a single digit which identifies the "type
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 60
    code has been scanned correctly. Since a scan can produce incorrect data due to inconsistent scanning speed, print imperfections, or a host of other problems been scanned, there is a high level of confidence that the bar code was scanned a full UPC-A barcode couldn't reasonably fit. A UPC-E code is
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 61
    odd" and "left-hand even" encoding character sets from the EAN-13 encoding standard. Check Character code has the following physical structure: a Left-hand guard bars, or start sentinel, encoded as 101. b Two number system characters, encoded as left-hand odd-parity characters. c First two message
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 62
    Center guard bars, encoded as 01010. e Last three message characters, encoded as right-hand characters. f Check digit 101. b The second character of the number system code, encoded as described below. c The five characters of the manufacturer code, encoded as described below. d Center guard pattern,
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 63
    hand side" of the symbol. The first character of the EAN-13 number system code (i.e., the first digit of the EAN-13 value) is encoded in the parity parity with which each of the characters in the left-hand side of the bar code will be encoded from the following table. 5 UCC-128 UCC-128 was developed
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 64
    on AI). e A Code-128 checksum character. 6 RSS-14 (including all variants: Expanded, Truncated, Limited, and Stacked) RSS-14 encodes the full 14-digit EAN/UCC item identification in a linear symbol that can be scanned omnidirectionally by suitably programmed point-of-sale scanners. RSS Limited
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 65
    PCL Specifications for composite bar codes Field Name Type Range Default (if not specified) Definition Symbology ID int - - Required. 24600T specifies UPC-A 24601T specifies UPC-A+2 24602T specifies UPC-A+5 24610T specifies UPC-E 24611T specifies UPC-E+2 24612T specifies
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 66
    SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB 0 (dec) or 00 (hex) Optional. Corresponds to the HP #h parameter. Note: When the value given is not within the defined range, the value will be set to default (Courier). The dimensions of the composite bar code may be varied in only two directions: • The
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 67
    Type printing characters) to a printer. The FREESCAPE emulation feature provides a way for these systems to redefine the escape character by substituting a user-selected alternative (alternate escape code (~) is the default AEC. To set an AEC with a PCL5 sequence: Use either of the
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 68
    of the ASCII codes listed: Command Function/Parameter Esc**#J ASCII code Character 34 " or 35 # AEC**#J 36 $ 47 / 63 ? 92 \ 123 { 124 | 125 } 126* ~ * Default value Example: Esc**124J changes the AEC to "|" FREESCAPE emulation can be deactivated by setting the AEC value
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 69
    generated. For more information, see "PostScript error messages" on page 148. There are certain command structure considerations to follow when implementing bar code applications using the Forms and Bar Code Card. Characteristic values, other than the default value, must be explicitly specified. If
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 70
    data is analyzed to determine if it is compressed or not, and if required, compression is automatically performed prior to printing the bar code. Checksum calculation Some bar code symbologies define checksum characters as a requirement of the data format. When this is the case, the Forms and Bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 71
    values for bars and spaces will also be the defaults, [8 16 24 32]. The /Special key defaults to false, so the checksum will be printed at the bottom left of the bar code. For the UPC-A symbology, the checksum character always prints when embedded text is specified, so /PrintCheckChar is irrelevant
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 72
    . It also specifies that the data is to be fully embedded within the code using the Courier-Bold font. For the EAN-8 symbology, the /Special key does not apply and the checksum character always prints when embedded text is specified so /PrintCheckChar is irrelevant. PostScript emulation operator 69
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 73
    Arguments for one-dimensional bar codes Key Type Definition /Symbology name Required, see "Values for /Symbology key" on page 72 for valid values /Units Optional, default is 1/600 inch. Other valid values are 1/300, 1/1200, and 1/720 inch, which also applies to height and width units for any
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 74
    Key Type Definition /Special boolean Optional, UPC-A, default is false: • if false, prints checksum at bottom left of the bar code • if true, prints checksum at middle left of the bar code Code 3 of 9, default is false: • if false, does not print start/stop * characters with text • if true,
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 75
    supplemental 420 3 8 16 24 32 N 12 /EAN-13 EAN/JAN-13 620 3 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 76
    -10 MSI with mod10 and 240 1 6 12 18 24 N Yes mod10 check digits 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 77
    tray label, 10-digit 420* 4 9 27 2 of 5 N 10 /USPS-zebra USPS Zebra code 225* 1* 1 For all bar code symbologies, default /FontName key = Courier Bold). 2 Does not include checksum character. 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 78
    Use symbology dependent default parameter, see "Values for / Symbology key" on page 72. Do not print text. Print text embedded. Print text half embedded. For ISBN and ISSN, this value is not allowed as the 2nd array element. Print text under bar code. Print text above bar code. Values for
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 79
    : /FontName /Courier Font attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN and ISSN bar codes are normally 10 digits in length (see the PCL5 section above for a complete description), but they have "extensions" known as ISSN+2, ISSN+5, and ISBN
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 80
    for N table [int int] Default value /AustralianPostal 50 (dec) [integer] 24 (dec) [integer] 130 (dec) [integer] 185 (dec) [integer] 11 (dec) [integer] Description Symbology identification Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the tracker height in 1/100 mm
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 81
    Overall size of bar code in decipoints (1/10 pt., optional) Sets the bar width in 1/100 mm. The range for this value changes based on the /Size setting. For example, if /Size = 100, the range for this value is 50 to 70 with the default setting being 60. If the value is set outside the valid range
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 82
    [int int] /Units Default value /DutchPostal 50 (dec) [integer] 22 (dec) [integer] 127 (dec) [integer] 188 (dec) [integer] [150 150] [array of integers] Description Symbology identification Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 83
    Key /QuietZone /Units Range [int int] Default value [150 150] [array of integers] Description Same as the other bar codes, in /Units (optional) 1/600 inch (optional) /BarHeight must be: • greater than or equal to 20 mm for module widths less than or equal to 0.45
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 84
    codes HIBC 39/128 Key /Symbology Type name /Units /Height name int /Bars [int] /Spaces [int] /EmbedText name Range Default be appropriately clipped and set to the minimum and the defined range will be appropriately clipped and set to the minimum and maximum values. Represents the set
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 85
    printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error Width 1 and Space Width 1 will be used to compute for the valid values of Bar/Space Widths 2, 3 and
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 86
    ) 01 33 (hex) Max: Ther is no maximum value, but larger bar codes may use up too much memory. • 756 (dec) or • 02 F4 (hex) Optional. Note: Values that go beyond the defined range will be appropriately clipped and set to the minimum and maximum values. Note: Bar Height does not include the
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 87
    -Bold Optional. Defines how the HRT is to be printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. Min: [0 0] (dec) Max: [1200 1200
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 88
    Units /ModuleWidth integer /Height integer Default Value Definition Required (/PDF417); signifies the bar code symbology Required; 0 for /Rows and /Columns set manually or 1 for /Rows and /Columns determined by /AspectRatio Required if /Type = 0; manually sets number of symbol rows; valid values
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 89
    other than 0-8, a RANGECHECK is set. Error correction can also be specified as a percentage. A valid non-zero /Errorpercent value will override /ErrorLevel. See "/ Error Percent" on page 86. Optional; not supported Optional; not supported false Optional; default is false (no truncation) If
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 90
    /Symbology /PDF417 /Type 1 /AspectRatio 0.5 /Units /600ths /ModuleWidth 20 /Height 2 /ErrorLevel 2 >>barcodeshow height = 40/600ths %number of error code words = 8 %because they are not specified, /Truncated defaults to %false (no ;truncation) and / QuietZone defaults to [150 150] Arguments for
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 91
    (dec) Default value /MaxiCode 02 (dec) Description Symbology identification 02 = Structured carrier message with numeric postal code 03 = Structured carrier message with alphanumeric postal code 04 = Standard symbol with standard error correction 05 = Full symbol with enhanced error correction 06
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 92
    prior to the postal code. (RS = record separator, ASCII 30; yy is a two-digit year). This message is automatically moved to the secondary message. Neither a group separator nor a comma should terminate this message. An optional secondary message follows the class of service for modes 2 and 3. For
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 93
    module (white or black rectangle) in 100th of an inch. To set the Y dimension to "default" at 600 DPI requires a value of 18.9, which is specified here as 1890 decimal. • 0 (dec) or • 00 (hex) • 0 (dec) or • 00 (hex) Optional. Automatic operation specified by using 0. Optional. Automatic operation
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 94
    -Bold Optional. Defines how the HRT is to be printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. Min: [0 0] (dec) Max: [1200 1200
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 95
    component. default module height of the linear component. Sets the Y dimension of the linear bar code. The data in a Postscript bar code sequence codes, the sequence uses the "pipe" character "|" to extend the sequence. For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 96
    the HRT is to be printed. When the value given is not within the defined range: • If the value is of type name, the value will be set to default (/ Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. The data in a Postscript bar code sequence is represented within
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 97
    searching for page delimeters 2 Fax and e-mail merged output The Forms Card can now fax or e-mail merged output, instead of printing it. This is accomplished by the setting of the WorkFlowVars tag in the LFF file for the formset. Note: This function is available only on MFPs that support e-mail and
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 98
    5 RFID Support Through LFJT (Lexmark Forms Job Ticket) support, the Forms Card now allows users to specify RFID printer options when printing a merged e-form. LFJT is a simple XML format for specifying those options. The LFJT is embedded into the merged PDF by the Forms Card firmware. The PDF is
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 99
    by utilizing a data filter to remove characters. See "Data filters" on page 96 below. Data filters The following information is a supplement to the Forms Menu information provided in the Forms and Bar Code Card User's Guide. If a data filter is enabled, the incoming forms job is run through
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 100
    "Forms Card Fonts" on page 128 identifies all supported/recognized fonts and the font file used by the Forms and Bar Code card. Bubble font This font is typically used for standardized testing forms that are optically read for grading purposes. It is available in Lexmark Forms Composer when the font
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 101
    Bubble font 98
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 102
    computer font list is richer than that of the printer, a user could easily create a form where not all characters will print. This Technical Reference cannot define what is standard and non-standard, as those definitions change for each geographic location. The user stipulates a supported code page
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 103
    files on printer directory The Forms and Bar Code Card places forms files on the printer in the "formsmerge" directory. These files will be visible if the user performs a Print Directory from the printer menu. These files must not be tampered with in any way. Forms files on printer directory 100
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 104
    (code page 737) Y Y Y NA Greek, Cyrillic monospaced Custom UPR Y font Y NA OMR monospaced font Y Y Y NA Common Fonts/Metrics on Y Forms Card NA NA Forms Card Features UTF-8, UTF-16 Y Y2 NA DBCS file names Y1 Y Y 1 Supported when the printer control panel is set to
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 105
    NA Honor Control Characters in Y Y Y NA Data PDF Version 1.3-1.6 1.3-1.6 1.6 NA Floating Subforms Y Y Y NA Error Page Control Printer Operator NA NA NA Panel Sel. Fax form output (MFP feature) Y NA Y NA E-mail form output (MFP Y NA Y NA feature) System variables in
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 106
    Downloadable DBCS fonts Forms flash file UTF-8 File Names Latin fonts in Forms Card (4MB) Bubble Font Formset Directives preservation Forms and Bar Code PLANET Y Y Y 1 Supported when the printer control panel is set to a DBCS language. 2 Limited UTF-8 and UTF-16 support (no Asian fonts or file
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 107
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 108
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 109
    an added measure of security. Code 93 extended is similar to Code 93 except that it allows the full 128 character ASCII character set to be encoded. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 110
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 111
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 112
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Interleaved 2 of 5 Sample code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 113
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 114
    especially designed for the high-speed scanning application of package sorting and tracking. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 115
    .1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name MicroPDF417 Y3 Y Y Y Sample Image Comments set. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 116
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 117
    LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Composite Bar Code Symbologies Composite + UPC code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 118
    Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Composite + EAN Y3 Y Y Y Sample Image Comments Composite + UCC/ Y3 Y Y Y EAN 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 119
    .3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Composite + RSS-14 Y3 Y Y Y Sample Image Comments 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code dictionaries have been
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 120
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 121
    LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name EAN/JAN-13, JIS-UCC code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 122
    -128 ISBN, ISBN+ 5 Y Y Y Y Y2 Comments The EAN/UCC-128 specification uses the same code set as Code 128 except that it does not allow function codes FNC2-FNC4 to be used in a symbol and FNC1 is used as part of the start code in the symbol. The check digit in EAN/ UCC-128 symbols is also
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 123
    -14 Stacked Omnidirectional allows the full height RSS-14 to be printed in two rows of two segments each. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 124
    Producer Lexmark Optra FormsTM Bar Code Name UPC type of product being identified. The next 5 digits are a manufacturer's code code symbol. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 125
    or five-digit number to be appended to the main bar code symbol. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 126
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 127
    to encode the originating post office, a customer identifier, a parcel number, and a check digit. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 128
    Y2 bar code PLANET Y3 Y Y Y Singapore 4-State Y Y Y Y Y2 Bar Code for Customer Encoding code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 129
    code, a 6-digit customer account number, and an 8-digit item number. USPS FIM (Face Identification Marking) Y Y Y Y Y FIM is used by the United States Postal Service (USPS) canceling machines to sort mail according to its postage requirements and whether it is bar-coded. There are four types
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 130
    in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM when the Bar Code Option is installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM. 3 These
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 131
    C Forms Card Fonts Single-Byte Forms Card Fonts The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms card. Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 132
    Font name AntiqueOliveCE-Roman AntiqueOlive-Compact AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 133
    Font name AvantGardeCE-DemiOblique AvantGarde-Demi AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 134
    Font name CenturySchlbk Roman CenturySchlbk-Bold CenturySchlbk-BoldItalic CenturySchlbk-Italic CenturySchlbk-Roman CG Omega (W1) CG Times (W1) CG Times (W1) Bold CG Times (W1) Bold Italic CG Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 135
    Font name CGOmega-BoldItalic CG-Omega-BoldItalic CGOmega-Italic CG-Omega-Italic CGTimes CG-Times CGTimes-Bold CG-Times-Bold CGTimes-BoldItalic CG-Times-BoldItalic CGTimes-Italic CG-Times-Italic Chicago ChicagoCE Clarendon Clarendon Condensed (W1) Clarendon Light Clarendon-Bold ClarendonCE
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 136
    Font name Coronet-Regular Courier Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 137
    Font name Garamond (W1) Kursiv Garamond (W1) Kursiv Halbfett Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 138
    Font name Goudy-BoldItalic Goudy-ExtraBold Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 139
    Font name Helvetica-Condensed-Oblique Helvetica-Italic Helvetica-Light Helvetica-Light Italic Helvetica-LightOblique Helvetica-Narrow Helvetica-Narrow Bold Helvetica-Narrow Bold Italic Helvetica-Narrow Italic Helvetica-Narrow-Bold Helvetica-Narrow-BoldItalic Helvetica-Narrow-BoldOblique Helvetica-
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 140
    Font name Intl-Courier-Oblique Intl-Univers-Bold Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 141
    Font name LubalinGraphCE-BookOblique LubalinGraphCE-Demi LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 142
    Font name Optima-Italic Oxford Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Palatino-Bold Palatino-BoldItalic PalatinoCE-Bold PalatinoCE-BoldItalic PalatinoCE-Italic PalatinoCE-Roman Palatino-Italic Palatino-Roman RomanPillar RomanPillar Bold RomanPillar BoldItalic RomanPillar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 143
    Font name Tekton Times New Roman Times New Roman Bold Times New Roman Bold Italic Times New Roman Italic Times-Bold Times-BoldItalic TimesCE-Bold TimesCE-BoldItalic TimesCE-Italic TimesCE-Roman Times-Italic TimesNewRoman TimesNewRoman-Bold TimesNewRoman-BoldItalic TimesNewRoman-BoldItalicTT
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 144
    Font name Univers (WE) Univers (WE) Bold Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 145
    Font name UniversCE-Condensed UniversCE-CondensedBold UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 146
    Double-Byte Forms Card Fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 147
    Forms printing error codes and suggested solutions. Error Message Act condition string malloc failed. BuildLineList failed. Cannot open archive file. Error Type Insufficient memory Internal or memory error Archive file Cannot select deafult Unicode font: SimSun. Font Error Cannot select default
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 148
    malloc failed. Invalid barcode. Error# = %d Barcode settings=%s Barcode data=%s Invalid LEXPDFOBJ file name. Error Type Insufficient memory Insufficient memory Insufficient memory Insufficient memory Bar code Error PDF file Invalid page condition data type. LEXGRAPHICOBJ grid object malformed
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 149
    Unable to open LFF file %s Error Type Solution Insufficient memory Add memory to printer. Insufficient memory Add memory to printer. Internal Error Contact Lexmark Service. Internal Error Contact Lexmark Service. PJC File Missing or corrupt file download formsets again. PJC File Missing
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 150
    XML file missing required element: %s Error Type LFM File Insufficient memory XML Error XML Error Solution Missing or corrupt file download formsets again. Add memory to printer. Possible corrupt file download formsets again. Possible corrupt file download formsets again. Forms Print Errors 147
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 151
    Errors Common error messages If an error occurs during a bar code operation, an error described in the following pages will be printed. The error is printed in the following format: !Err: nn Printed Error Example: !ERR: 12 Invalid Character PostScript error messages To assist with troubleshooting
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 152
    Structure out of range Parameter buffer NULL Parameter buffer too small Parameters not saved Unknown bar code Type Unknown bar code ID Unknown bar code Type or ID Fonts not loaded Not enough memory String errors String errors result from bad input data and represent the most commonly encountered
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 153
    X RSS14 X X X Singapore Post X X Swiss Postal X X UCC-128 X X British Royal Mail X X X UPC-A/E X X X USPS ZIP X X USPS FIM X X USPS Sack X X Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common error messages 150
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 154
    Error Code Symbology Error Description 20 UPCE String not decompressed 21 PDF417 String too long 22 PDF417 Too many code words 23 PDF417 Too many code 31 Aztec Too many code words for expected Sort Code 37 Aust Post Invalid Customer Code errors shown in red are only thrown by
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 155
    Invalid checksum 10 60 MicroPDF Too few columns 61 MicroPDF Too many columns 62 MicroPDF Too few rows 63 MicroPDF Too many rows Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common error messages 152
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 156
    code scan contains only uppercase. However, the HRT is printed as lowercase, reflecting the input data, rather than the actual bar code encoded data, which this Technical Reference considers as an error , the Forms and Bar Code Card firmware must convert any code 93 lowercase input to uppercase
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 157
    characters. Large bar codes may not fit on the page, or the reliability of the scan may begin to suffer with large amounts of encoding data. However, the BCE will still attempt to encode large amounts of input data, until the image fails. There is no warning or error associated with excessive data
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 158
    and descenders are used, and the bar code scans correctly with a verifier. A change in the BCE to address this minor difference may be implemented in a later version. Note: Exact size compatibility of certain 4-state bar code image sizes with previous Lexmark bar code options is not assured. However
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 159
    current and previous bar code products, and the PDF417 should fit within the available space. MaxiCode Capacity Please refer to the AIM MaxiCode specification, which can be found at: • http://lemming.sa.ap.lexmark.com/~tbarnett/files/AIM_Maxicode_05081997.pdf On page 13, section 4.8 "Modes" defines
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 160
    by firmware before the BCE is called. The remaining maximum data should be safely submitted to the BCE to be rendered. This will require extra checking code to be added before the BCE, to truncate any excess data. However, this procedure will prevent the BCE from throwing errors on pages with
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 161
    Call method The existing Bar Code Technical Reference manual ver 2.4b, and the HP BarDIMM Technical Reference manual from 3.0 onward are in plus a separator) are included in the input data, the BCE will throw an error. Users should add additional parsing that examines input data: • Byte 5 for either
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 162
    anyway. If the 4-byte Structured Append is specified alone, then the Forms and Bar Code Card should print a valid MaxiCode symbol that is empty (no data). Depending on the scanner used, it may not produce a valid scan. If an old-style 3-byte Structured Append is specified alone, then the Forms and
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 163
    a Codabar barcode with no characters present, then the !Err: 15 String too Short error message is generated. Postcript barcodepath Operator The Postscript operator barcodepath does not work as on previous Lexmark Bar Code options. The barcodepath operator used to obtain the outline of the bar
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 164
    Manager will result in one of two scenarios: • If the printer's Print PS Error setting is turned on, then an error page will print and the job will be flushed. The printer will then return to Ready state. • If the printer's Print PS Error setting is turned off, then the job will be flushed and the
  • Lexmark X466 | Forms and Bar Code Technical Reference - Page 165
    www.lexmark.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
www.lexmark.com
March 2009
Forms and Bar Code Card
Technical Reference Manual