Lexmark X466 Maintenance Guide
Lexmark X466 Manual
 |
View all Lexmark X466 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X466 manual content summary:
- Lexmark X466 | Maintenance Guide - Page 1
Lexmark™ X46x Maintenance Guide September 2009 www.lexmark.com - Lexmark X466 | Maintenance Guide - Page 2
the status of supplies from the printer control panel 7 Checking the status of supplies from a network computer 7 Ordering supplies...8 Ordering toner cartridges...8 Ordering a photoconductor kit...8 Ordering ADF replacement parts...9 Moving the printer to another location...9 Shipping the - Lexmark X466 | Maintenance Guide - Page 3
. 5 Make sure all areas of the printer are dry before beginning a new print job. Cleaning the scanner glass If you encounter print quality problems, such as streaks on copied or scanned images, clean the areas shown. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the - Lexmark X466 | Maintenance Guide - Page 4
3 Wipe the areas shown and let them dry. 4 Close the scanner cover. Cleaning the ADF separator rollers After you have copied over 50,000 copies using the ADF, clean the ADF separator rollers. 1 Open the ADF cover. 2 Unlock the separator roll. 3 Remove the separator roll. 4 Use a clean, lint-free - Lexmark X466 | Maintenance Guide - Page 5
with the progress bar appears. The printer performs a power-on sequence, and then the Configuration menu appears. 5 Touch the down arrow until Scanner Manual Registration appears. 6 Touch Scanner Manual Registration. 7 Touch Print Quick Test to print a registration page. 8 Choose the section of the - Lexmark X466 | Maintenance Guide - Page 6
, short edge first into the ADF. b Touch Copy Quick Test. The scanner prints a copy of the Quick Test page. c Touch ADF Front or ADF Back. d Use the copy of the Quick Test page to adjust the Horizontal Adjust and Top Margin settings. e Touch Submit. f Touch Copy Quick Test and compare the new - Lexmark X466 | Maintenance Guide - Page 7
cartridge. Checking the status of supplies from a network computer Note: The computer must be connected to the same network as the printer. 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, print a network setup page - Lexmark X466 | Maintenance Guide - Page 8
your printer model, the printer issues a message or a light sequence to let you know the photoconductor kit is near its end of life. At this time, order a photoconductor kit. You can also see the status of the photoconductor kit by printing a network setup page. Part name Photoconductor kit Part - Lexmark X466 | Maintenance Guide - Page 9
parts Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the Automatic Document Feeder. Part name ADF input tray ADF separator pad ADF separator roll Part number 40X5470 40X5472 40X5471 Moving the printer to another location Warning - Lexmark X466 | Maintenance Guide - Page 10
Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for a relocation kit. Maintaining the printer 10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Lexmark⢠X46x Maintenance Guide
September 2009
www.lexmark.com