Lexmark X548 Print Defects Guide
Lexmark X548 Manual
 |
View all Lexmark X548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X548 manual content summary:
- Lexmark X548 | Print Defects Guide - Page 1
in.), then the photoconductor unit needs to be replaced. Note: Make sure the current selection in the printer for Scale to Fit in the PDF menu is set to No for the rulers to be printed at the correct size. Change the developer unit. Change the imaging kit. 43.9 mm (1.7 in.) 34.6 mm (1.4 in.) 94 - Lexmark X548 | Print Defects Guide - Page 2
37.7 mm (1.5 in.) Change the transfer module. 78.5 mm (3.1 in.) Print defects guide Page 2 of 2 55 mm (2.2 in.)
-
1 -
2
 |
 |
Print defects guide
Repeating defects measurements
Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects
on the print job indicates which particular part is causing the defect.
For example, if the marks on the paper occur every 34.6 mm (1.4 in.), then the photoconductor unit needs to be replaced.
Note:
Make sure the current selection in the printer for Scale to Fit in the PDF menu is set to No for the rulers to be printed at
the correct size.
Change the developer unit.
Change the imaging kit.
43.9 mm
(1.7 in.)
34.6 mm
(1.4 in.)
94.2 mm
(3.71 in.)
Print defects guide
Page 1 of 2