Lexmark X5650 User's Guide - Page 96
Scanning to a computer over a network, Canceling scan jobs - printer download
UPC - 734646078566
View all Lexmark X5650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
5 Wait for the printer to finish downloading the applications list. Note: This list is downloaded from the applications available on the computer. Make sure a photo-editing application is installed on the computer. 6 From the list of applications, press the arrow buttons until the application that you want appears. 7 Press . The scanned image is sent to the photo-editing application that you selected. Scanning to a computer over a network 1 Make sure that: • The printer is connected to a network through a print server or through a wireless network connection. • The printer, the print server (if used), and the computer receiving the scanned image are all turned on. • The printer is configured to scan over a network. 2 Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. • Adjust the paper guide on the ADF tray to the width of the original document. • When using the scanner glass, close the top cover to avoid dark edges on the scanned image. 3 From the printer control panel, press . 4 Press the arrow buttons until Network appears, and then press . 5 If prompted, press the arrow buttons to select the computer name of the network computer where you want to send the scanned image, and then press . Notes: • You may be prompted to enter a PIN if the computer requires it. To assign a computer name and a PIN to the network computer, see the Help for the printer software associated with your operating system. • If your printer has a numeric keypad, enter the PIN using the keypad, and then press . • If your printer does not have a numeric keypad, use the arrow buttons to decrease or increase the value for each digit (the default value is 0000) in the PIN, and then press each time you select a digit. 6 Wait until the printer has finished downloading the scan applications list. 7 Press the arrow buttons until the application that you want appears, and then press . 8 Press . Canceling scan jobs Using the printer control panel To cancel a scan job started in the printer control panel, press . Scanning 96