Lexmark X652DE Card Stock & Label Guide

Lexmark X652DE - Mfp Taa Gov Compliant Manual

Get Lexmark X652DE - Mfp Taa Gov Compliant PDF manuals and user guides
UPC - 734646093835
View all Lexmark X652DE manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark X652DE manual content summary:

  • Lexmark X652DE | Card Stock & Label Guide - Page 1
    Card Stock & Label Guide Laser Printers January 2011 www.lexmark.com
  • Lexmark X652DE | Card Stock & Label Guide - Page 2
    technical inaccuracies or typographical errors. Changes are periodically made services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark
  • Lexmark X652DE | Card Stock & Label Guide - Page 3
    testing...8 Design factors...9 Pick roller technology...11 Maintenance procedures...13 Troubleshooting...13 Card stock 15 Weight...15 Grain orientation...16 Coatings...17 Offset powders...18 Labels...19 Label characteristics...19 Printing on labels...19 Duplexing paper labels...19 Label components
  • Lexmark X652DE | Card Stock & Label Guide - Page 4
    C750...42 Lexmark C752...44 Lexmark C760 and C762...46 Lexmark C770, C772, C780, and C782...49 Lexmark C790...50 Lexmark C910...52 Lexmark C912...53 Lexmark C920...55 Lexmark C925...56 Lexmark C935...58 Lexmark E120...59 Lexmark E220...61 Lexmark E230, E232, E234(n), E330, and E332n 62 Lexmark E238
  • Lexmark X652DE | Card Stock & Label Guide - Page 5
    X651de, X652de, X654de, X656de, and X658de 109 Lexmark X734, X736, and X738...113 Lexmark X782...115 Lexmark X790...117 Lexmark X850, X852e, and X854e...119 Lexmark X860e, X862e, and X864e...121 Lexmark X925...124 Lexmark X940 and X945...126 Optra plus, 4039, 4029, 4019, WinWriter 600 printers 127
  • Lexmark X652DE | Card Stock & Label Guide - Page 6
    6
  • Lexmark X652DE | Card Stock & Label Guide - Page 7
    successful card stock and label testing and education programs with print material vendors and converters. This document provides guidelines to help you select appropriate print materials for the following Lexmark laser printers. Model series 4019 models 4029 models 4039 10 plus 4039 12C C series
  • Lexmark X652DE | Card Stock & Label Guide - Page 8
    labels, for example, may result in more frequent service calls. Proper printer maintenance helps alleviate these problems. For information about maintaining your printer, see "Maintenance procedures" on page 13. Print material testing Choosing print materials can seem complex. Unfortunately, it is
  • Lexmark X652DE | Card Stock & Label Guide - Page 9
    -lb bond. Thicker paper means less paper can be placed in a tray, and paper that is heavier and more dense may cause paper jams or feed reliability problems in some printers. Check the supported paper weights table located in the printer documentation to verify that the paper basis weight being used
  • Lexmark X652DE | Card Stock & Label Guide - Page 10
    jams, feeding problems, reduced print quality, and predispensing (peeling) labels. Inks (preprinted stock) Preprinted stock introduces semi-liquid and volatile components to the high temperatures and pressure used in the laser printing process. Preprinted inks and colorations must withstand a fuser
  • Lexmark X652DE | Card Stock & Label Guide - Page 11
    failure to have installed a maintenance kit as specified (if applicable) • use of printing media outside of Lexmark specifications • use of non-Lexmark supplies (such as toner cartridges and/or inkjet cartridges) • use of non-Lexmark product or component Pick roller technology Some printers have an
  • Lexmark X652DE | Card Stock & Label Guide - Page 12
    For the following printers, make sure perforations fall outside the 0.3-0.79-inch area on the leading edge of the media: Optra S, Optra T, T520, T522, T620, T622, T630, T632, T634,
  • Lexmark X652DE | Card Stock & Label Guide - Page 13
    cleaning process every time you replace the black cartridge, more often with some media. Failure to follow maintenance procedures for your printer could cause jamming, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions for some common
  • Lexmark X652DE | Card Stock & Label Guide - Page 14
    Solutions to printing problems Problem Solution Print on heavy stock is blurred or out of focus. Toner rubs off the page. Make sure the Paper Type setting is appropriate for your print material. (Card stock in excess of 203 g/m2 [54-lb bond] may not produce acceptable print results.) Print five
  • Lexmark X652DE | Card Stock & Label Guide - Page 15
    163 g/m2). Not all printers are able to print on cover stock. This is because cover stock is usually thicker and not able to make the turns in the printer paper path. This causes paper jams and sometimes causes the paper to feed incorrectly. Also, when using a laser printer, toner is pulled onto the
  • Lexmark X652DE | Card Stock & Label Guide - Page 16
    mm (25 x 38 in.) Cover 508 x 660.4 mm (20 x 26 in.) Printing Bristol Index Bristol 571.5 x 889 mm 647.7 x 774.7 mm (22.5 x 35 problems. Curl may decrease the ability of the form to move reliably through the printer. Most printers feed paper short edge first. If your printer supports larger paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 17
    surfaces or surfaces that mimic laid finishes (glossy paper, not glossy card stock, is acceptable for some printers). Paper smoothness also affects print quality. If the paper is too rough, the toner does not fuse to the paper properly; if the paper is too smooth, it can affect feed reliability
  • Lexmark X652DE | Card Stock & Label Guide - Page 18
    are used by print shops to prevent printed pages from sticking together. Powder is usually sprayed on the printed page right before it reaches the stacker on the offset printing press. This powder provides an intermediate layer between two sheets of paper, preventing ink from transferring from
  • Lexmark X652DE | Card Stock & Label Guide - Page 19
    and cartridge service warranties. Do not feed labels through the printer more than once. Doing so may result in adhesive contamination to the cartridge and other components. Depending on your printer model and the number of labels you print, printing labels may require special printer maintenance
  • Lexmark X652DE | Card Stock & Label Guide - Page 20
    affects paper feeding and causes paper jams in the printer. We recommend labels used for duplexing have printing. In addition, using ties helps prevent the labels from predispensing in the printer. The slits and cuts in the labels expose the adhesives to the printer. For best results when duplexing
  • Lexmark X652DE | Card Stock & Label Guide - Page 21
    and duplex paper in the same printer. When ordering a new cartridge, be sure to order the cartridge that includes the correct fuser wiper. Label components Labels are composed of three basic parts: the liner, the adhesive, and the face sheet. Labels may also have topcoats that affect printing
  • Lexmark X652DE | Card Stock & Label Guide - Page 22
    liners reduce toner contamination inside the printer and improve feed performance. Slick, non-porous liners are harder to feed and increase toner buildup in the fuser and on the backup roll. Rough backings, on the other hand, can increase paper path friction, which can cause skew and paper jams. The
  • Lexmark X652DE | Card Stock & Label Guide - Page 23
    printing problem is printer and cartridge contamination. The adhesives are semi-liquid and may contain volatile components. If the sheet jams in the fuser, the adhesive can melt, thereby contaminating parts of the printer or releasing fumes. To avoid exposing adhesive to the paper path guides, drive
  • Lexmark X652DE | Card Stock & Label Guide - Page 24
    in.) at leading edge 279.4 mm (11 in.) at driver edge Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge and could void your printer and cartridge warranties. When using pressure-sensitive materials without zone coating, choose
  • Lexmark X652DE | Card Stock & Label Guide - Page 25
    Liner edge Stripped edge 0.125 in. 3 mm 0.094 in. 2.4 mm Leading Edge 8.5 in. 215.9 mm Waste strip 0.25 in (6.35 mm) Non-print area 0.33 in. 8.38 mm 0.5 in. Top perforation 12.7 mm Waste strip Driver edge 11 in. 279.4 mm 0.06 in. 1.6 mm Perforation end Liner edge 0.33 in. 8.38 mm Non
  • Lexmark X652DE | Card Stock & Label Guide - Page 26
    The following diagram shows a recommended label design for the T640 and T650 laser printers. Labels 26
  • Lexmark X652DE | Card Stock & Label Guide - Page 27
    diagram shows a recommended label design for laser printers, which use a different paper picking mechanism. 0.094 in. 2.4 mm Leading Edge 8.5 in. 215.9 mm Liner edge Stripped edge 0.125 in. 3 mm Non-print area 0.79 in. 20 mm 0.33 in. 8.38 mm Top perforation Driver edge 11 in. 279.4 mm 0.06
  • Lexmark X652DE | Card Stock & Label Guide - Page 28
    may lead to labels peeling off the form inside the printer, which will require printer servicing. For more information on recommended label designs, see "Label design guidelines" on page 23. • For Optra S, Optra T, and Lexmark T printers, a leading and trailing edge stripped area is recommended to
  • Lexmark X652DE | Card Stock & Label Guide - Page 29
    -sensitive portion feeds into the printer first. • Due to the unique construction of integrated forms, you may experience stacking problems in the output bin. Contact your Lexmark marketing representative if you experience stacking problems with these forms. Note: Test some forms before purchasing
  • Lexmark X652DE | Card Stock & Label Guide - Page 30
    Printer specifications Lexmark C500n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C500n does not support vinyl or polyester labels. The Lexmark C500n supports 90-210-g/m2 (24-55-lb) stock. Card stock and labels are supported from Tray 1 and
  • Lexmark X652DE | Card Stock & Label Guide - Page 31
    C510 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C510 does not support vinyl or polyester labels. The Lexmark C510 supports stocks up to 176 g/m2. Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to
  • Lexmark X652DE | Card Stock & Label Guide - Page 32
    Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C520, C522, and C524 do not support vinyl or polyester labels. The Lexmark C520, C522, and C524 support stocks up to 176 g/m2. Card stock is supported from Tray 1, Tray 2, the manual feed slot
  • Lexmark X652DE | Card Stock & Label Guide - Page 33
    synthetic facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the
  • Lexmark X652DE | Card Stock & Label Guide - Page 34
    quality, always set Paper Type to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C530, C532, and C534 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C530, C532, and C534 do not support vinyl or polyester
  • Lexmark X652DE | Card Stock & Label Guide - Page 35
    synthetic facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the
  • Lexmark X652DE | Card Stock & Label Guide - Page 36
    Springhill Index Plus 90 lb card stock. • For the best print quality, always set Paper Type to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C540, C543, C544, and C546dtn Notes: • Your printer may not have a 650-sheet duo drawer with an integrated multipurpose
  • Lexmark X652DE | Card Stock & Label Guide - Page 37
    use of paper office labels designed for laser printers. The Lexmark C540, C543, C544, and C546dtn do not support vinyl or polyester labels. The Lexmark C540, C543, C544, and C546dtn support card stock weights up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feeder
  • Lexmark X652DE | Card Stock & Label Guide - Page 38
    . For more information, see "Pick roller technology" on page 11. Lexmark C720 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C720 does not support vinyl or polyester labels. The Lexmark C720 supports stocks up to 43 lb (163 g/m2). Feed labels
  • Lexmark X652DE | Card Stock & Label Guide - Page 39
    support Paper source Tray 1 (standard tray) Index Bristol 163 g/m2 Card stock Tag 163 g/m2 Cover - For paper and transparency specifications, see the printer User's Guide. Labels Paper Using media higher than 300 Sheffield could result in printing degradation. Weight: Up to 163 g/m2 Index
  • Lexmark X652DE | Card Stock & Label Guide - Page 40
    print quality, always set the Paper Type to Card Stock. Lexmark C734 and C736 Lexmark C734 and C736 support maximum weights supported. Overview of card stock support Paper source g/m2 Overview of label support Paper source Standard 550-sheet tray (Tray 1) Optional 550-sheet tray
  • Lexmark X652DE | Card Stock & Label Guide - Page 41
    manufactured with chemicals that may contaminate the printer. • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper-handling problems. For more information, see "Pick roller technology" on page 11. Printer specifications 41
  • Lexmark X652DE | Card Stock & Label Guide - Page 42
    C750 The Lexmark C750 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. The Lexmark C750 paper feeding mechanism uses advanced technology that enhances feeding reliability. The Lexmark C750
  • Lexmark X652DE | Card Stock & Label Guide - Page 43
    not supported in duplex. 2 See "Grain orientation" on page 16 for specific recommendations. 3 Vinyl labels are supported only when printing environment and media are 20-32°C (68-90°F). 4 Pressure-sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark
  • Lexmark X652DE | Card Stock & Label Guide - Page 44
    orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C752 The Lexmark C752 prints on many labels designed for use with laser printers. The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m2 paper, reliably feed all supported media. The
  • Lexmark X652DE | Card Stock & Label Guide - Page 45
    not supported in duplex. 2 See "Grain orientation" on page 16 for specific recommendations. 3 Vinyl labels are supported only when printing environment and media are 20-32°C (68-90°F). 4 Pressure-sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark
  • Lexmark X652DE | Card Stock & Label Guide - Page 46
    in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C760 and C762 Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 47
    Lexmark C760 and C762 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2,000-sheet drawer supports paper only. Print material specifications Range or maximum weight
  • Lexmark X652DE | Card Stock & Label Guide - Page 48
    to Card Stock in the Paper Menu. • Do not use creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 48
  • Lexmark X652DE | Card Stock & Label Guide - Page 49
    Lexmark C770, C772, C780, and C782 print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview of card stock support Paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 50
    card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C790 Lexmark C790 prints on many labels designed for use with laser printers. The following tables list the
  • Lexmark X652DE | Card Stock & Label Guide - Page 51
    print materials for laser printers. A fuser equipped with a dry web cleaner may be required for label applications to optimize feed reliability. If you print large quantities of labels or other glossy print media, then install a dry web cleaner upgrade kit (P/N 40X1856). Contact your local service
  • Lexmark X652DE | Card Stock & Label Guide - Page 52
    roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C910 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C910 supports stocks up to 163
  • Lexmark X652DE | Card Stock & Label Guide - Page 53
    stock. • For the best print quality, always set the Paper Type to Card Stock in the Paper Menu. Lexmark C912 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C912 supports stocks up to 216
  • Lexmark X652DE | Card Stock & Label Guide - Page 54
    When printing on vinyl labels: • From the operator panel or from MarkVision Professional, set the Paper Type to Card Stock in the Paper Menu. Set the CardStock Weight (under the Paper Weight menu) to Heavy. • Download the vinyl file, vinyl8ppm.npa, from our FTP site and send it to the printer (copy
  • Lexmark X652DE | Card Stock & Label Guide - Page 55
    stock. • For the best print quality, always set the Paper Type to Card Stock in the Paper Menu. Lexmark C920 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C920 supports stocks up to 216
  • Lexmark X652DE | Card Stock & Label Guide - Page 56
    , always set the Paper Type to Card Stock in the Paper Menu. Lexmark C925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The trays and the multipurpose feeder support card stock. The
  • Lexmark X652DE | Card Stock & Label Guide - Page 57
    m2 256 g/m2 Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Labels printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print
  • Lexmark X652DE | Card Stock & Label Guide - Page 58
    stock. It may cause paper jams. • We recommend the use of grain long card stock. Lexmark C935 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to
  • Lexmark X652DE | Card Stock & Label Guide - Page 59
    creased card stock. It may cause paper jams. • We recommend the use of grain long card stock. Lexmark E120 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E120 supports stocks up to 163 g/m2
  • Lexmark X652DE | Card Stock & Label Guide - Page 60
    of card stock and label support Paper source Tray 1 Manual feed Card stock Index Bristol 135-163 g/m2 (up to 90 lb) 135-163 g/m2 (up to 90 lb) Labels Paper 60-163 g/m2 (16-43 lb) 60-163 g/m2 (16-43 lb) For paper and transparency specifications, see the Lexmark E220 Publications CD. Vinyl
  • Lexmark X652DE | Card Stock & Label Guide - Page 61
    E220 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E220 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following
  • Lexmark X652DE | Card Stock & Label Guide - Page 62
    E230, E232, E234(n), E330, and E332n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E230, E232, E234(n), E330, and E332n support paper and label stock from 60-90 g/m2 (24 lb) and card
  • Lexmark X652DE | Card Stock & Label Guide - Page 63
    Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports stocks up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one
  • Lexmark X652DE | Card Stock & Label Guide - Page 64
    Lexmark E250, E350, and E450n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60-90 g/m2 and index card stock up to 163 g/m2 (43 lb). You can load up to 50
  • Lexmark X652DE | Card Stock & Label Guide - Page 65
    Lexmark E260, E260d, E260dn, E360d, E360dn, E460dn, E460dw, and E462dtn Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60-90 g/m2 and index card stock up
  • Lexmark X652DE | Card Stock & Label Guide - Page 66
    E320, E322 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E320 and Lexmark E322 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or
  • Lexmark X652DE | Card Stock & Label Guide - Page 67
    E321, E323 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E321 and Lexmark E323 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or
  • Lexmark X652DE | Card Stock & Label Guide - Page 68
    T420 The Lexmark T420 prints on many labels designed for use with laser printers. The Lexmark T420 supports stocks up to 60 and 10 sheets of card stock. The following tables list the maximum weights supported by Tray 1 and the multipurpose feeder. Overview of card stock support Card stock Paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 69
    . When printing on card stock: • Set the Paper Type to Card Stock from the printer driver, the Local Printer Setup Utility, or MarkVision. • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into
  • Lexmark X652DE | Card Stock & Label Guide - Page 70
    For more information, see "Maintenance procedures" on page 13. Lexmark T430 The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We do not recommend using vinyl or polyester labels. The Lexmark T430 supports stocks from 60-163 g/m2 (16-
  • Lexmark X652DE | Card Stock & Label Guide - Page 71
    , do not remove the leading or driver edge. • The perforation locations may impact printer reliability. Note: Test any perforated card stock or paper before purchasing large quantities. • Portrait orientation is preferred, especially when printing bar codes. • Do not use labels that have exposed
  • Lexmark X652DE | Card Stock & Label Guide - Page 72
    Maintenance procedures" on page 13. Lexmark T520, T522 The Lexmark T520 and T522 print on many labels designed for use with laser printers. The following table lists the maximum weights supported m2 (65 lb) Labels Paper 180 g/m2 (48 lb bond) 163 g/m2 (43 lb bond) Dual-web paper 180 g/m2 (48 lb
  • Lexmark X652DE | Card Stock & Label Guide - Page 73
    tray, which holds 250 or 500 sheets of 20-lb xerographic paper, reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note
  • Lexmark X652DE | Card Stock & Label Guide - Page 74
    Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T620, T622 Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 75
    -135 g/m2 (20-36 lb bond) 1 See "Grain orientation" on page 16 for specific recommendations. 2 The Lexmark T622 does not support vinyl labels. 3 Pressure-sensitive area must enter the printer first for grain short paper. 4 Due to label design characteristics, unacceptable feeding may be experienced
  • Lexmark X652DE | Card Stock & Label Guide - Page 76
    T620 and T622 tray, which holds 500 sheets of bond paper, reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 7-inch forms, Lexmark offers a variety of special media trays and drawers. Note: Optional
  • Lexmark X652DE | Card Stock & Label Guide - Page 77
    11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T630, T632, T634 The Lexmark T630, T632, and T634 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the
  • Lexmark X652DE | Card Stock & Label Guide - Page 78
    Paper base (grain long) 75-135 g/m2 (20-36 lb bond) 75-135 g/m2 (20-36 lb bond) 1 See "Grain orientation" on page 16 printer first for grain short paper. For paper and transparency specifications, see the publications CD. The following table indicates the paper sizes each tray supports. Paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 79
    T634 tray, which holds 250 or 500 sheets of bond paper, reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional
  • Lexmark X652DE | Card Stock & Label Guide - Page 80
    Paper Type to Card Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 81
    , T644 The Lexmark T640, T642, and T644 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels Grain Index Dual-web Paper source
  • Lexmark X652DE | Card Stock & Label Guide - Page 82
    To duplex labels, consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper. The wax wiper that is used with the T640, T642, and T644 is P/N 40X2666. (Cartridges designed for duplex label printing contain
  • Lexmark X652DE | Card Stock & Label Guide - Page 83
    It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T650, T652, T654, and T656dne The Lexmark T650, T652, T654, and T656dne print on many
  • Lexmark X652DE | Card Stock & Label Guide - Page 84
    , and T656dne tray holds 250 and 550 sheets of bond paper and reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional
  • Lexmark X652DE | Card Stock & Label Guide - Page 85
    , consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper. The wax wiper that is used with the T650, T652, T654, and T656dne is P/N 40X2666. (Cartridges designed for duplex label printing contain two wax
  • Lexmark X652DE | Card Stock & Label Guide - Page 86
    on page 13 • "Troubleshooting" on page 13 Lexmark W812 The Lexmark W812 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels Paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 87
    .) 279-356 mm (11-11.7 in.) Up to 163 g/m2 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W820 supports stocks up to 163 g/m2. Always feed labels and card stock from Tray
  • Lexmark X652DE | Card Stock & Label Guide - Page 88
    . It may cause paper jams. • We recommend the use of grain long card stock. Lexmark W840 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216
  • Lexmark X652DE | Card Stock & Label Guide - Page 89
    Paper Type to Card Stock from the printer driver. • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 90
    the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark W850 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports
  • Lexmark X652DE | Card Stock & Label Guide - Page 91
    . Preprinting introduces semi-liquid and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge
  • Lexmark X652DE | Card Stock & Label Guide - Page 92
    X203n and X204n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend printing more than 20 pages of labels a month. For best results, feed labels from the paper tray. The Lexmark X203n and X204n printer models support stocks up to 90 g/m2
  • Lexmark X652DE | Card Stock & Label Guide - Page 93
    works best, especially when printing bar codes. • Be sure adhesive print quality and cause jams or other paper handling problems Maintenance procedures" on page 13. Lexmark X215 The Lexmark X215 prints on paper office labels designed for use with laser printers. Labels can be fed only from the manual
  • Lexmark X652DE | Card Stock & Label Guide - Page 94
    of card stock support Card stock Paper source Index Bristol Manual bypass feeder* Up to 163 g/m2 (90 lb) * Card stock can be fed only from the manual bypass feeder. Tag Up to 163 g/m2 (100 lb) For paper and transparency specifications, see the Lexmark X215 User's Guide. Cover - Media
  • Lexmark X652DE | Card Stock & Label Guide - Page 95
    for laser printers. We do not recommend using vinyl, pharmacy, or polyester labels. It is recommended to print no more than 20 pages of paper labels a month. The printer and duplex path support paper and label stock from 60-90 g/m2 (16-24 lb). The multipurpose and manual feeders support card
  • Lexmark X652DE | Card Stock & Label Guide - Page 96
    a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non-oozing adhesive. • Portrait orientation works best, especially when printing bar codes. When printing on card stock: • Make sure the Paper Type is Card Stock. • Select the Paper Texture setting. Printer specifications 96
  • Lexmark X652DE | Card Stock & Label Guide - Page 97
    " on page 13. Lexmark X422 The Lexmark X422 prints on many labels designed for use with laser printers. Card stock is supported from the multipurpose feeder, and labels are supported from the standard tray. The following table lists the maximum weights supported. Note: Scanning large quantities
  • Lexmark X652DE | Card Stock & Label Guide - Page 98
    . Lexmark X463de, X464de, X466dte, and X466dtwe Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl, pharmacy, or polyester labels. It is recommended to print no more than 20 pages of paper labels a month. Printer specifications
  • Lexmark X652DE | Card Stock & Label Guide - Page 99
    The printer and duplex path support 60-90 g/m2 (16-24 lb) paper weights. The multipurpose feeder supports 60- 163 g/m2 (16-43 lb) paper weights. You can load up to 50 label sheets in the standard tray and optional trays. You can load up to 15 paper labels and up to 10 sheets of card stock in the
  • Lexmark X652DE | Card Stock & Label Guide - Page 100
    . For more information, see "Maintenance procedures" on page 13. Lexmark X500 and X502n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark X500 and X502n do not support vinyl or polyester labels. The Lexmark X500 and X502n support 90-210 g/m2 (24
  • Lexmark X652DE | Card Stock & Label Guide - Page 101
    : Up to 210 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Lexmark X543, X544, and X546dtn Limit label printing to occasional use of paper office labels designed for use with laser printers. Lexmark X543, X544, and X546dtn do not
  • Lexmark X652DE | Card Stock & Label Guide - Page 102
    can cause feeding problems. • Use only letter-, A4-, or legal-size full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When printing on card
  • Lexmark X652DE | Card Stock & Label Guide - Page 103
    X560 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card stock Labels Paper source
  • Lexmark X652DE | Card Stock & Label Guide - Page 104
    stock that is creased. It may cause paper jams. Lexmark X642e The Lexmark X642e prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended
  • Lexmark X652DE | Card Stock & Label Guide - Page 105
    X642e tray holds 250 or 500 sheets of bond paper and reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional
  • Lexmark X652DE | Card Stock & Label Guide - Page 106
    Paper Type to Card Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 107
    X646e print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card stock Labels Grain Paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 108
    labels, consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper. The wax wiper that is used with the X644e and X646e is P/N 40X2666 (Cartridges designed for duplex label printing contain two wax wipers
  • Lexmark X652DE | Card Stock & Label Guide - Page 109
    on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark X651de, X652de, X654de, X656de, and X658de The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers. The following table lists the maximum weights supported
  • Lexmark X652DE | Card Stock & Label Guide - Page 110
    that enhances feeding reliability. The standard Lexmark X651de, X652de, X654de, X656de, and X658de trays hold 250 or 550 sheets of bond paper, and reliably feed all media tested according to the guidelines specified under "Dimensions" on page 9. For difficult-to-print sizes, such as 3 x 5-inch index
  • Lexmark X652DE | Card Stock & Label Guide - Page 111
    materials for laser printers. Printing labels on the X651de, X652de, X654de, X656de, and X658de requires a special fuser cleaner that prevents duplexing. It is recommended that you install a special oil fuser cleaner, P/N 40X2665, when you run labels. When you order a new cartridge, be sure the
  • Lexmark X652DE | Card Stock & Label Guide - Page 112
    Paper Type to Card Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 113
    X736, and X738 Lexmark X734, X736, and X738 printer models support card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, the multipurpose tray, and the optional 550-sheet specialty media drawer. Note: The optional 2,000-sheet tray does not support card stock or labels
  • Lexmark X652DE | Card Stock & Label Guide - Page 114
    manufactured with chemicals that may contaminate the printer. • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper-handling problems. For more information, see "Pick roller technology" on page 11. Printer specifications 114
  • Lexmark X652DE | Card Stock & Label Guide - Page 115
    Lexmark X782 The Lexmark X782 can print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview of card stock support Paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 116
    printing on card stock: • From the printer control panel, set Paper Type to Card Stock in the Paper Menu. • Do not use creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting
  • Lexmark X652DE | Card Stock & Label Guide - Page 117
    Lexmark X790 Lexmark X790 supports card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, and the multipurpose feeder. Note: The optional 2,000-sheet drawer does not support card stock or labels. Overview of card stock support Paper 216 g/m2 Printer specifications 117
  • Lexmark X652DE | Card Stock & Label Guide - Page 118
    recommended for use with laser printers. To prevent specialty media sheets from sticking together, remove each sheet from the exit bin as it is printed. Card stock and label guidelines When printing on labels: • Set Paper Type to Labels from the printer driver. • Use standard-size products
  • Lexmark X652DE | Card Stock & Label Guide - Page 119
    the printer first. Lexmark X850, X852e, and X854e Limit label printing to occasional use of paper office labels designed for laser printers. Paper labels are supported in Tray 1, Tray 2, and the manual bypass feeder. The following table lists the maximum weights supported. Note: Scanning large
  • Lexmark X652DE | Card Stock & Label Guide - Page 120
    recommended for use with laser printers. To prevent specialty media sheets from sticking together, remove each sheet from the output bin as it is printed. Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard-size products
  • Lexmark X652DE | Card Stock & Label Guide - Page 121
    and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark X860e, X862e
  • Lexmark X652DE | Card Stock & Label Guide - Page 122
    Paper Type to Card Stock from the printer driver. • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 123
    • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 123
  • Lexmark X652DE | Card Stock & Label Guide - Page 124
    Lexmark X925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Trays and the multipurpose feeder support card stock. The multipurpose feeder supports card stocks up to 256 g/m2. Always
  • Lexmark X652DE | Card Stock & Label Guide - Page 125
    Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 printer and could void your warranty. When printing on card stock: • Use grain long card stock, and set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 126
    occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X940 and X945 support stocks up to 220 g/m2. Always feed labels and card stock from Tray 1, 2, or 3. We recommend printing on grain long card stock. The
  • Lexmark X652DE | Card Stock & Label Guide - Page 127
    stock. It may cause paper jams. Optra plus, 4039, 4029, 4019, WinWriter 600 printers The following table lists the maximum weights supported by each of the special card stock and label trays, as well as the manual feed tray. Overview of card stock and label support Paper source 200-sheet heavy
  • Lexmark X652DE | Card Stock & Label Guide - Page 128
    that you test your selected print material to printer. Note: If you use materials with a weight over 135 g/m2 (36 lb bond), print registration and skew may be unpredictable. Card stock and labels supported (11-inch card stock and label trays) Media Paper/card stock 1 Pressure-sensitive paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 129
    tray positions (upper and lower) Upper and Lower: All supported media Upper and Lower: All supported media 1 Select the appropriate tray according to the part of the form (pressure-sensitive area or paper base) that enters the printer first when feeding from the tray. 2 Grain long is recommended
  • Lexmark X652DE | Card Stock & Label Guide - Page 130
    and Optra plus printer. Print the menus page from the Tests Menu to determine the level of engine code installed in your printer. Contact Lexmark customer support if you need assistance upgrading to a higher level. • Always use the fuser cleaners that come with the 4039 print cartridges. If you need
  • Lexmark X652DE | Card Stock & Label Guide - Page 131
    Card stock and labels are not supported from any of the paper trays. For paper and transparency specifications, see the printer User's Guide. Optra C710 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels.
  • Lexmark X652DE | Card Stock & Label Guide - Page 132
    to make the labels liquid-resistant. • Do not use labels that have exposed adhesive on the label sheets. When printing on card stock: • We recommend using Springhill Index Plus 90 lb card stock. • For the best print quality, always set the Paper Type to Card Stock. Printer specifications 132
  • Lexmark X652DE | Card Stock & Label Guide - Page 133
    1200 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra Color 1200 supports stock up to 163 g/m2 (43 lb). Always feed labels and card stock from the multipurpose feeder. The multipurpose feeder
  • Lexmark X652DE | Card Stock & Label Guide - Page 134
    Optra E, Ep Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra E and Optra Ep support stocks up to 163 g/m2 (43 lb). Tray 1 can hold up to 10 sheets of card stock or labels. The following table
  • Lexmark X652DE | Card Stock & Label Guide - Page 135
    Optra E310, E312 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra E310 and Optra E312 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or
  • Lexmark X652DE | Card Stock & Label Guide - Page 136
    slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 199 g/m2 199 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover 176 g/m2 176 g/m2 For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 180 g/m2 300 g/m2 180
  • Lexmark X652DE | Card Stock & Label Guide - Page 137
    procedures" on page 13. Optra K 1220 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels or any card stock with the Optra K 1220 printer. Always feed labels from the manual feed tray or the optional
  • Lexmark X652DE | Card Stock & Label Guide - Page 138
    Overview of card stock and label support Paper source Multipurpose feeder Manual feed tray Card stock Index Bristol Tag - - - - For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm
  • Lexmark X652DE | Card Stock & Label Guide - Page 139
    only be used to feed paper; it does not support card stock and label printing. You can try occasional label printing from Tray 1, but we recommend you use the multipurpose feeder. For paper and transparency specifications, see the printer User's Guide. Tray specifications Source Multipurpose feeder
  • Lexmark X652DE | Card Stock & Label Guide - Page 140
    " on page 13. Optra N Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Always feed labels from the multipurpose tray. The multipurpose tray can hold up to 50 sheets of labels. The Optra N supports print
  • Lexmark X652DE | Card Stock & Label Guide - Page 141
    lists the maximum weights supported by each of the printer trays. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and optional 250-sheet and 500-sheet trays 250-sheet drawer Paper (grain long) Xerographic or business paper 60-176 g/m2 (16
  • Lexmark X652DE | Card Stock & Label Guide - Page 142
    lb bond) For paper and transparency specifications, see the printer User's Guide. Media specifications Labels printing degradation. Card stock Weight: Up to 199 g/m2 Index Bristol (90 lb) Up to 203 g/m2 Tag (100 lb) The following table indicates the paper sizes each tray supports. Paper
  • Lexmark X652DE | Card Stock & Label Guide - Page 143
    performance reliability. The duplex option supports all paper weights and types that the printer supports, except for transparencies and envelopes. Duplexing of specially designed labels is supported in the Optra S1855 printer. You may notice skew or print registration problems if you feed materials
  • Lexmark X652DE | Card Stock & Label Guide - Page 144
    are needed. Print cartridge with label fuser cleaner Print cartridge part number 1382929 PrebateTM (cartridge for special label machine use) For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Yield
  • Lexmark X652DE | Card Stock & Label Guide - Page 145
    use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and 250-sheet and 500-sheet trays optional 250-sheet drawer Paper (grain
  • Lexmark X652DE | Card Stock & Label Guide - Page 146
    page 16 for specific recommendations. 2 Pressure-sensitive area must enter the printer first for grain short paper. For paper and transparency specifications, see the printer User's Guide. The following table indicates the paper sizes each tray supports. Paper result in printing degradation. Card stock
  • Lexmark X652DE | Card Stock & Label Guide - Page 147
    " on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 250-sheet Universally Adjustable Trays designed for the Lexmark T printer family support forms with a minimum length of 5 inches when installed
  • Lexmark X652DE | Card Stock & Label Guide - Page 148
    orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Optra W810 Limit label printing to occasional use of A4- or letter-size paper labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra W810 supports stocks up to
  • Lexmark X652DE | Card Stock & Label Guide - Page 149
    Type to Plain Paper. The Optra W810 treats card stock the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper Type is set to Card Stock. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain long card stock. Printer
  • Lexmark X652DE | Card Stock & Label Guide - Page 150
    increase toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support itself and remain flat and straight during the printing process
  • Lexmark X652DE | Card Stock & Label Guide - Page 151
    Adhesive contamination" on page 150. The orientation of the fibers in the print material. Grain short indicates the fibers run the width of the paper. Grain long indicates the fibers run the length of the paper. Transfer of ink from a form to the printer's pick mechanism or fuser assembly, which can
  • Lexmark X652DE | Card Stock & Label Guide - Page 152
    print material. If the paper is too rough, the toner does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding problems in the printer when it is flexed. A printing process that raises the ink image or design above the surface
  • Lexmark X652DE | Card Stock & Label Guide - Page 153
    Zone coating A finish with a rough surface similar to eggshell and antique finishes. A vellum finish is relatively absorbent, providing good ink penetration. Waviness in the stock that gives a rippled appearance to the material; generally moisture related. Placing adhesive in selected areas only
  • Lexmark X652DE | Card Stock & Label Guide - Page 154
    29 ironing 10 L label and paper Industry 8 label characteristics 19 label components adhesives 22 face sheets 23 liners 21 topcoats 23 label fuser cleaner (Optra S) 143 labels construction 21, 19 design 23, 19 dual web forms 27 duplexing 19 integrated forms 29 printer maintenance 19 printing 19
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Card Stock & Label Guide
Laser Printers
January 2011
www.lexmark.com