Lexmark X748 Print Defects Guide

Print defects guide

Repeating defects measurements

Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects

on the print job indicates which particular part is causing the defect.

Note:

There are four additional color pages and a blank page that will print out with this Guide. Use these pages for assistance

in determining which part is defective.

Change the photoconductor unit for

the color that shows this defect.

Change the toner cartridge for the

color that shows this defect.

Change the fuser if one of these repeating defects

appears on the printed page.

72.4 mm

(2.85 inches)

28.3 mm

(1.11 inches)

33.0 mm

(1.30 inches)

35.3 mm

(1.39 inches)

47.4 mm

(1.87 inches)

94.8 mm

(3.73 inches)

113 mm

(4.45 inches)

Print defects guide

Page 1 of 6