Lexmark X792 Copy Guide
Lexmark X792 Manual
View all Lexmark X792 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X792 manual content summary:
- Lexmark X792 | Copy Guide - Page 1
the scanner glass. 2 Adjust the paper guides when loading a document into the ADF. Note: Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may result to a cropped image. 3 From the printer control panel, press to start copying. Copying - Lexmark X792 | Copy Guide - Page 2
copies (simplex) from twosided original documents. Collate This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The factory default setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you - Lexmark X792 | Copy Guide - Page 3
can choose between 1-sided and 2-sided booklets. Note: This option appears only when a print duplexer and printer hard disk are installed. • Cover Page Setup-Use to set copy cover page and booklet cover page. • Custom Job-Use to combine multiple scanning jobs into a single job. • Edge Erase-Use to - Lexmark X792 | Copy Guide - Page 4
to place a blank piece of paper between copies, pages, or print jobs. The separator sheets can be drawn from a tray that contains a type or color of paper that is different from the paper your copies are printed on. Save As Shortcut This option allows the current settings to be saved as a shortcut
Copy guide
Making a quick copy
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides when loading a document into the ADF.
Note:
Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result to a cropped image.
3
From the printer control panel, press
to start copying.
Copying using the ADF
1
Load an original document faceup, short edge first into the ADF.
Note:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy
> change the copy settings >
Copy It
Copying using the scanner glass
1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy
> change the copy settings >
Copy It
3
If you have more pages to scan, then place the next document on the scanner glass, and then touch
Scan the Next Page
.
4
Touch
Finish the Job
to return to the home screen.
Understanding the copy screens and options
Copy from
This option opens a screen where you can enter the paper size of the original document.
•
Touch a paper size that matches the original document.
•
Touch
Mixed Sizes
to copy an original document that contains mixed paper sizes with the same width.
•
Touch
Auto Size Sense
to allow the scanner to automatically determine the size of the original document.
Copy guide
Page 1 of 4