Lexmark X852E Quick Reference
Lexmark X852E - Mfp Manual
UPC - 734646002806
View all Lexmark X852E manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X852E manual content summary:
- Lexmark X852E | Quick Reference - Page 1
MFP control panel is in copy mode and the Ready status message is displayed. (If necessary, press Stop/Clear to enter copy mode.) 2 Use the drawing on the scanner as a guide Press Go/Send. ©Copyright Lexmark International, Inc., 2002. All rights reserved. P/N 15A3602 Printed in U.S.A. 3/02 EC 543375 - Lexmark X852E | Quick Reference - Page 2
MFP Quick Reference Collation/ Finishing Paper saver Duplex Content text mixed on your copies. This does not apply to faxes or network scans. Print copies 2-up or 4-up to save paper. Specifies the orientation of PDF originals for network scans. This does not apply to faxes. Set duplex options
MFP Quick Reference
©Copyright Lexmark International, Inc., 2002. All rights reserved.
P/N 15A3602
Printed in U.S.A. 3/02
EC 543375
Make a simple copy
1
Make sure the MFP control panel is in copy
mode and the
Ready
status message is
displayed. (If necessary, press
Stop/Clear
to
enter copy mode.)
2
Use the drawing on the scanner as a guide to
feeding the paper and make sure the top of
each page feeds in first.
3
Use the numeric keypad to enter the number
of copies you want to make.
4
Press
Go
/
Send
.
Tips
•
If you are using the flatbed of the scan unit,
watch the control panel for messages. If
prompted to
Place Next Or Stop
, place the
next page and then press
Go
/
Send
to
continue scanning. Press
Stop/Clear
when
all the pages have been scanned.
•
Press
Collation/Finishing
to collate your
copies, or add finishing such as staple or
punch if available.
•
Make sure the light is on next to the
Duplex
setting you want to use. (If duplexing is
available)
•
Press
Reduce
or
Enlarge
to scale the
original document.
•
Select a
Paper Saver
setting to copy two
pages (or four pages) of your original
document onto one sheet of paper.
Send a fax
1
Place your originals in the automatic feeder
or on the flatbed.
2
Use one of the following methods to fax:
a
Press
Fax/Scan Mode
repeatedly until
you see
Enter Phone #
in the display. Use
the numeric keypad to enter the fax
number of the person receiving the fax.
b
Press
Fax/Scan Mode
repeatedly until
you see
SCAN
→
FAX
in the control panel
display. Press
Menu>
until you see your
fax destination.
c
Press
#
and then enter the shortcut
number assigned to the fax number
3
Press
Go
/
Send
.
Cancel a fax
Press
Stop/Clear
to cancel sending a fax. When
you cancel a fax, the control panel resets to copy
mode. You must restart the fax sending process.
If your documents have already scanned into
memory, press
Menu >
until you see
Cancel fax
,
then press
Select
. Press
Menu >
again until you
see the fax you want to cancel, then press
Select
.
Scan a document
1
At your PC, type the IP address of the MFP in
the URL field of your browser or use the
ScanBack Utility to define your scan profile.
2
Locate the network-attached MFP you want
to use.
3
Place your originals in the automatic feeder
or on the flatbed.
4
Use one of the following methods to scan:
a
Press
Fax/Scan Mode
repeatedly until
you see
SCAN
→
PROFILE
.
Press
Menu >
repeatedly until you see your job
name.
b
Press
Fax/Scan Mode
repeatedly until
you see
SCAN
→
EMAIL
or
SCAN
→
FTP
.
Press
Menu >
repeatedly until you see your
e-mail or FTP destination.
c
Press
#
and then enter the shortcut
number assigned to the scan destination.
5
Press
Go
/
Send
.