Lexmark X860 Quick Reference
Lexmark X860 Manual
 |
View all Lexmark X860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X860 manual content summary:
- Lexmark X860 | Quick Reference - Page 1
MFP adjust the paper guides. 3 From the printer control panel, press . 4 If you placed the document on the scanner glass, then touch Finish the Job to return the keypad to enter the number of copies. The copy screen appears. 3 Change the copy settings as needed. 4 Touch Copy It. 5 If you have more - Lexmark X860 | Quick Reference - Page 2
faxing documents directly from software programs. Note: In order to perform this function from your computer, you must use the PostScript printer driver for your printer 2 If you are loading a document into the ADF, adjust the paper guides. 3 On the home screen, touch FTP. 4 Touch Search Address Book - Lexmark X860 | Quick Reference - Page 3
Review the instructions on , then adjust the paper guides. 11 Press , and then enter the shortcut number using the keypad, or touch Held Jobs on the home screen, and the printer where the jam occurred. When there is more than one jam, the number of jammed pages is displayed. 200-201 paper jams 1 - Lexmark X860 | Quick Reference - Page 4
1 Open Door A by pushing the release latch up and lowering the door. 3 Pull the jam up. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Open Door E by pushing the release - Lexmark X860 | Quick Reference - Page 5
1 Open Door D. 3 Close Door D. 4 Open Door A by pushing the release latch up and lowering the door. 6 Pull the jam up. 7 Close Door E. 8 Close Door A. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before - Lexmark X860 | Quick Reference - Page 6
4 Open Door A by pushing the release latch up and lowering the door. 24x paper jam Jam in Tray 1 1 Remove Tray 1 from the printer. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 5 Pull the - Lexmark X860 | Quick Reference - Page 7
. 250 paper jam 1 Remove the paper from the multipurpose feeder. 2 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 3 Load the paper into the multipurpose feeder. 4 Adjust the paper guide to rest - Lexmark X860 | Quick Reference - Page 8
Open Door F. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Pull the jam up and toward you. 5 Remove the jam. Note: If the jam does not move immediately, stop pulling. Push down and pull - Lexmark X860 | Quick Reference - Page 9
1 Lift Door H. 289 staple error 1 Open Door G. 3 Firmly pull the colored tab to remove the staple cartridge. 2 Remove the jam. 3 Close Door H. 2 Hold the lever on the staple cartridge holder, and move the holder to the right. 4 Use the metal tab to lift the staple guard, and then pull out the - Lexmark X860 | Quick Reference - Page 10
down on the staple guard until it snaps securely into place. 28x paper jam 284 paper jam 1 Open Door F. 7 Push the cartridge holder firmly into the stapler until the holder clicks into place. 2 Remove the jam. 8 Close Door G. Priming Stapler appears. Priming ensures the stapler is functioning - Lexmark X860 | Quick Reference - Page 11
Close Door H. 285-286 paper jams 1 Lift Door H. 2 Remove the jam. 3 Close Door H. 287-288 paper jams 1 Open Door F. 2 Remove the jam. 3 Close Door F. 4 Open Door G. 5 Remove the jam. 6 Close Door G. 290-294 paper jams 1 Remove all original documents from the ADF. 2 Lift the ADF cover latch. 3 Open - Lexmark X860 | Quick Reference - Page 12
4 Raise the sheet guard. 5 Turn the paper advance wheel to the left to remove any jammed pages. 6 Close the ADF cover. 7 Open the scanner cover, and remove any jammed pages. 293 paper jam The printer was sent a scan job, but found no original document in the ADF. Try one or more of the following: •
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Laser MFP
Quick Reference
Copying
Making a quick copy
1
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the
paper guides.
3
From the printer control panel, press
.
4
If you placed the document on the scanner glass, then touch
Finish the Job
to return to the home screen.
Copying using the ADF
1
Load an original document faceup, short edge first into the
ADF.
Note:
Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
On the home screen, touch
Copy
, or use the keypad to enter
the number of copies.
The copy screen appears.
4
Change the copy settings as needed.
5
Touch
Copy It
.
Copying using the scanner
glass
1
Place an original document facedown on the scanner glass in
the upper left corner.
2
On the home screen, touch
Copy
, or use the keypad to enter
the number of copies.
The copy screen appears.
3
Change the copy settings as needed.
4
Touch
Copy It
.
5
If you have more pages to scan, then place the next document
on the scanner glass, and then touch
Scan the Next Page
.
6
Touch
Finish the Job
to return to the home screen.
E-mailing
Sending an e-mail using the
touch screen
1
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the
paper guides.
3
On the home screen, touch
E-mail
.
4
Enter the e-mail address or shortcut number.
To enter additional recipients, touch
Next Address
, and then
enter the address or shortcut number you want to add.
5
Touch
E-mail It
.
Sending an e-mail using a
shortcut number
1
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the
paper guides.
3
Press
, and then enter the shortcut number using the
keypad.
To enter additional recipients, press
Next address
, and then
enter the address or shortcut number you want to add.
4
Touch
E-mail It
.
Sending an e-mail using the
address book
1
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper
guides.
3
On the home screen, touch
E-mail
.
4
Touch
Search Address Book
.
5
Enter the name or part of the name you are searching for, and
then touch
Search
.
6
Touch the name that you want to add to the To: box.
To enter additional recipients, press
Next address
, and then
enter the address or shortcut number you want to add; or
search the address book.
7
Touch
E-mail It
.
1