Lexmark X950 IPDS Printer and Host Setup Guide
Lexmark X950 Manual
View all Lexmark X950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X950 manual content summary:
- Lexmark X950 | IPDS Printer and Host Setup Guide - Page 1
Lexmark Card for IPDS and Card for IPDS and SCS/TNe IPDS Printer and Host Setup Guide - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 2
, are the user's responsibility. Trademarks AFP, AS/400, IBM, iSeries, MVS, OS/2, OS/390, OS/400, Print Services Facility, PSF, System/390, zSeries, and z/OS are trademarks of International Business Machines Corporation in the United States, other countries, or both. Intelligent Printer Data Stream - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 3
and Specifications 4 Customer Support...5 1. iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server ...6 2. PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 14 3. PSF/2 LAN Printing Using an Internal LAN Print Server - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 4
C950 • Lexmark X950, X952, X954 • Lexmark X548 • Lexmark 6500e Unless otherwise specified, in the rest of this guide the term "printer" covers both printers and MFPs. The term "Card for IPDS" also refers to the "Card for IPDS and SCS/TNe". To print IPDS jobs, the printer must have the optional Card - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 5
IPDS Printer and Host Setup Guide Equipment Requirements And Specifications Customer Support If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 6
, or iSeries, and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option settings. Steps The following - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 7
Printer and Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server Example PSFCFG with parameters to change shown in bold. PSF configuration PSFCFG > IPDSPRT1 (Note: IPDSPRT is a user defined name.) Library > Your LIB User - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 8
Printer Standard Network Port or MarkNet Internal Print Server PDF paper size drawer 2 PDF multiple group handling:......... Acknowledge multiple groups.......... Process option PDF fonts inline PDF data queue Library PDF mail server Sender of PDF mail PDF administrator PDF user program - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 9
transform program USRDTATFM *NONE Library User defined driver program........... USRDRVPGM *NONE Library Secure connection SECURECNN *NO Validation list VLDL *NONE Library Publishing information PUBLISHINF Support duplex *UNKNOWN Support color *UNKNOWN Pages per minute - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 10
Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server Example Select TCP/IP. 7 Use the navigation buttons or icons to scroll through the options. Check each of the following settings and change them as needed to configure TCP/ - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 11
options are found in the printer control panel under MENU/Menus > Option Card Menu > IPDS MENU > EMULATION. 1 "Resident" is the default setting. If you are replacing a printer Auto". If you experience printing problems, set Host Resolution to "300". 3 If you are replacing a printer that used a 43xx - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 12
to the IPDS Emulation User's Guide for information on these options and other IPDS MENU settings to format IPDS jobs. Note 1: On MFPs, "Copy Interrupt" is supported: an IPDS job can be interrupted by copy jobs and will resume printing automatically. Note 2: The supported printers and MFPs do not - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 13
control panel MENU/Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 5. Printer Messages and Problems on page 31 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 14
MVS mainframe and printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option settings. Software requirements - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 15
Fax Interrupt Settings 6 Verify IPDS Printing 7 Troubleshooting Step 1 Choose a Printer Port for Printing IPDS Jobs Several printer ports are available for receiving IPDS jobs when using the printer Standard Network port or the MarkNet internal LAN print server. The printer port will be used in one - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 16
and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Step 2 Define the printer to JES a) 8160 seconds. The default value is 0. If DISCINTV=0, the PSF does not end the printer session when no output is available. Refer to "Printer and Host Timeout Values - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 17
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Example PSF STARTUP DSN=SYS1.FONTLIB,DISP=SHR /* SYSTEM FONTS */ // DD DSN=INST.FONTLIB,DISP=SHR/* USER FONTS */ // * // PSEG02 DD DSN=INST.PSEGLIB,DISP=SHR /* PAGE SEGMENTS */ - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 18
Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 1 From a Ready state press the MENU button (printers). if you set the IP address another way.) Enable AutoIP Yes or No (Default is Yes. This is the recommended setting.) WINS Server Address 157.184.100 - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 19
to the IPDS Emulation User's Guide for information on these options and other IPDS MENU settings to format IPDS jobs. Note 1: On MFPs, "Copy Interrupt" is supported: an IPDS job can be interrupted by copy jobs and will resume printing automatically. Note 2: The supported printers and MFPs do not - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 20
some bar codes print in the wrong size, refer to the Bar Code Size option in the IPDS User's Guide for more information. Using the control panel MENU/Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 8 Refer to Chapter 5. Printer Messages and Problems on page 31 for - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 21
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 9 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 21 - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 22
setting up PSF/2 and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or a MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option settings. Refer to the - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 23
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) On the PSF/2 OK and then Create. The PSF/2 printer device is now created and is ready to print from a PSF/2 connected host. e) On the PSF/2 Control Panel select Options and Setup queues. The Setup queues menu - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 24
files can be submitted to the newly created print queue. Step 3 Enable Printer Sharing With the Job Interval Shutdown Timer To enable the printer to start other print jobs from another protocol, interface or server, the PSF/2 tuning option Job Interval Shutdown Timer is used. Use the following - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 25
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) On the PSF/2 Control Panel select Profile and then Change. c) Now select Tuning Options. The Job Interval Shutdown Timer indicates the number of seconds PSF/2 waits before shutting down when there are no jobs - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 26
Guide PSF/2 LAN Printing Using an Internal LAN Print Server Step 4 Configure the Printer's Print Server TCP/IP Settings To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print scroll through the options. Check each of Default is Yes. This is the recommended setting.) 26 - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 27
to the IPDS Emulation User's Guide for information on these options and other IPDS MENU settings to format IPDS jobs. Note 1: On MFPs, "Copy Interrupt" is supported: an IPDS job can be interrupted by copy jobs and will resume printing automatically. Note 2: The supported printers and MFPs do not - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 28
control panel MENU/Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 5. Printer Messages and Problems on page 31 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 29
Host Setup Guide Printer and Host Timeout Values 4. Printer and Host Timeout Values Selecting compatible values of the printer IPDS Timeout value and host release timers is very important when printing IPDS jobs. Selection of some values will cause communication problems between the printer and the - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 30
from other IPDS sessions and non-IPDS jobs waiting on other ports will not print. Note 3: This timer combination is not recommended. If used, the difference between the two timers should be a minimum of 30 seconds. Note 4: A printer IPDS Timeout value of 15 sec or 30 sec is recommended. This allows - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 31
Setup Guide Printer Messages and Problems 5. Printer Messages and Problems Review these problems and solutions for possible answers to your questions. Use the table below if you are searching for information on a printer message or for keywords for a problem. Message (bold) or Problem Problem - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 32
the optional IPDS firmware card. Solution to Problem 2 Power the printer OFF, remove the optional IPDS firmware card, and install it in the other connector on the system card. Some models require the optional firmware card to be installed in a specific connector. Problem 3: Fatal error in print - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 33
to allow permanent downloaded resources from PostScript and PCL jobs to be deleted. Try reprinting the job after powering the printer OFF and ON. B. There may be insufficient printer memory to print the IPDS job with print resolution selected in the printer's MENU/Menus > Option Card Menu > IPDS - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 34
and Host Setup Guide Printer Messages and Problems requirements on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. D. The host may be downloading more IPDS resources than can be held in the printer's memory. Add more - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 35
LOAD EMUL OPTION appears on the display after updating the printer code. Solution to Problem 9 The IPDS emulation version contained in the Card will not function with the printer code. Download the correct IPDS emulation version. See the section on support (page 5) for firmware update information - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 36
to remove the IPDS fonts and then restore the password protection. Problem 13: Disk Full or Flash Full The printer control panel displays a disk full or flash full message and the printer stops printing. Solution to Problem 13 The hard disk or user flash became full before all resources from the - Lexmark X950 | IPDS Printer and Host Setup Guide - Page 37
IPDS Printer and Host Setup Guide Printer Messages and Problems 37
Lexmark
Card for IPDS
and
Card for IPDS and SCS/TNe
IPDS Printer and Host Setup Guide