Lexmark X952 Copy Guide
Lexmark X952 Manual
View all Lexmark X952 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X952 manual content summary:
- Lexmark X952 | Copy Guide - Page 1
Copy guide Page 1 of 4 Copy guide The copy function lets you create copies using the printer. Note: You can load paper sizes in a short-edge-first or long-edge-first orientation. For more information, see "Supported paper sizes, types, and weights" section in the User's Guide. Making a quick copy 1 - Lexmark X952 | Copy Guide - Page 2
Copy guide Page 2 of 4 Copy to This option opens a screen where you can enter the paper size and type on which your copies will be printed. • Touch the paper size and type that matches the paper loaded. • If the settings for "Copy from" and "Copy to" are different, then the printer automatically - Lexmark X952 | Copy Guide - Page 3
printer hard disk are installed. • Cover Page Setup-Use to set copy cover page and booklet cover page. • Custom Job-Use to combine multiple scanning , faintly, in large print across each page. Note: A custom overlay can also be created by your system support person. When a custom overlay is created - Lexmark X952 | Copy Guide - Page 4
, and 4-up would print four pages of your document on a single page. Touching Print Page Borders adds or removes the outline border surrounding the original document pages on the output page. • Separator Sheets-Use to place a blank piece of paper between copies, pages, or print jobs. The separator
Copy guide
The copy function lets you create copies using the printer.
Note:
You can load paper sizes in a short-edge-first or long-edge-first orientation. For more information, see “Supported paper
sizes, types, and weights” section in the
User's Guide
.
Making a quick copy
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides when loading a document into the ADF.
Note:
Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result to a cropped image.
3
From the printer control panel, press
to start copying.
Copying using the ADF
1
Load an original document faceup, short edge first into the ADF.
Note:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy
> change the copy settings >
Copy It
Copying using the scanner glass
1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy
> change the copy settings >
Copy It
3
If you have more pages to scan, then place the next document on the scanner glass, and then touch
Scan the Next Page
.
4
Touch
Finish the Job
to return to the home screen.
Understanding the copy screens and options
Copy from
This option opens a screen where you can enter the paper size of the original document.
•
Touch a paper size that matches the original document.
•
Touch
Mixed Sizes
to copy an original document that contains mixed paper sizes with the same width.
•
Touch
Auto Size Sense
to allow the scanner to automatically determine the size of the original document.
Copy guide
Page 1 of 4