Lexmark X952 Maintenance Guide

Lexmark X952 Manual

Get Lexmark X952 PDF manuals and user guides View all Lexmark X952 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark X952 manual content summary:

  • Lexmark X952 | Maintenance Guide - Page 1
    X950 Series Maintenance Guide June 2011 www.lexmark.com
  • Lexmark X952 | Maintenance Guide - Page 2
    parts and supplies...13 Replacing a maintenance kit...13 Replacing a photoconductor unit ...13 Replacing a toner cartridge...19 Replacing the waste toner bottle ...21 Replacing a staple cartridge...26 Moving the printer...34 Before moving the printer ...34 Moving the printer to another location...34
  • Lexmark X952 | Maintenance Guide - Page 3
    , as they may damage the finish of the printer. 4 Wipe only the outside of the printer, making sure to include the standard exit bin. Warning-Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer. 5 Make sure the paper support and standard exit bin are dry
  • Lexmark X952 | Maintenance Guide - Page 4
    Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Wipe the areas shown and let them dry. 4 Close the scanner cover. Maintaining the printer 4
  • Lexmark X952 | Maintenance Guide - Page 5
    lenses Clean the printhead lenses when you encounter print quality problems. 1 Open the front door. 2 Slide the release lever to the left to unlock the cover. 3 Open the cover. Warning-Potential Damage: To avoid overexposing the photoconductor unit, do not leave the cover open for more than
  • Lexmark X952 | Maintenance Guide - Page 6
    4 Locate the printhead wipers. Maintaining the printer 6
  • Lexmark X952 | Maintenance Guide - Page 7
    5 Gently pull the printhead wipers out until it stops, and then slowly slide them back into place. 6 Close the cover. Maintaining the printer 7
  • Lexmark X952 | Maintenance Guide - Page 8
    7 Slide the release lever to the right to lock the cover. 8 Close the front door. Maintaining the printer 8
  • Lexmark X952 | Maintenance Guide - Page 9
    Emptying the hole punch box 1 Open door G. 2 Pull out the hole punch box. Maintaining the printer 9
  • Lexmark X952 | Maintenance Guide - Page 10
    3 Empty the container. 4 Insert the emptied hole punch box back into the finisher until it stops. 5 Close door G. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them. Do not expose
  • Lexmark X952 | Maintenance Guide - Page 11
    where you purchased the printer. Notes: • The gauges displayed are an estimate of the life left for the supply or part indicated next to each gauge. • All page life estimates for supplies assume printing on a single side of letter or A4 size plain paper. Ordering toner cartridges When 88.xx [color
  • Lexmark X952 | Maintenance Guide - Page 12
    Part name Magenta high‑yield toner cartridge Cyan high‑yield toner cartridge Part number X950X2MG X950X2CG Ordering a photoconductor unit When 84.xx [Color] photoconductor low or 84.xx [Color] photoconductor nearly low appears, order a replacement photoconductor unit. When 84.xx Replace [color]
  • Lexmark X952 | Maintenance Guide - Page 13
    kit are designed to be user‑replaceable. The kits come with instructions. Recommended maintenance kits and part numbers Maintenance kit 160K Maintenance Kit 200K ADF Maintenance Kit 320K (100 V) Maintenance Kit 320K (110 V) Maintenance Kit 320K (220 V) Maintenance Kit 480K Maintenance Kit Service
  • Lexmark X952 | Maintenance Guide - Page 14
    2 Rotate the release lever counterclockwise to open the cover. 3 Lower the cover. Warning-Potential Damage: To avoid overexposing the photoconductor unit, do not leave the door open for more than 10 minutes. Maintaining the printer 14
  • Lexmark X952 | Maintenance Guide - Page 15
    4 Grasp the handle of the photoconductor unit and pull it out of the machine. 5 Unpack the replacement photoconductor unit. 6 Align and insert the end of photoconductor unit. Maintaining the printer 15
  • Lexmark X952 | Maintenance Guide - Page 16
    7 Remove the tape from the top of the photoconductor unit. 8 Push the tab forward to insert the photoconductor unit. Maintaining the printer 16
  • Lexmark X952 | Maintenance Guide - Page 17
    9 Push the photoconductor unit until it clicks into place 10 Gently pull the printhead wipers out until it stops, and then slowly slide them back into place. Maintaining the printer 17
  • Lexmark X952 | Maintenance Guide - Page 18
    11 Close the cover. 12 Rotate the release lever clockwise to lock the cover. Maintaining the printer 18
  • Lexmark X952 | Maintenance Guide - Page 19
    13 Close the front door. Replacing a toner cartridge 1 Open the front door. 2 Put your hand under the dent of the toner cartridge, and then slightly lift up the cartridge. Maintaining the printer 19
  • Lexmark X952 | Maintenance Guide - Page 20
    3 Pull out the toner cartridge. 4 Unpack the replacement toner cartridge, and then shake it front‑to‑back and side‑to‑side to evenly distribute the toner. 5 Remove the red packing strip from the new cartridge. 6 Insert the new cartridge into the printer. Maintaining the printer 20
  • Lexmark X952 | Maintenance Guide - Page 21
    7 Close the front door. Replacing the waste toner bottle 1 Turn the printer off. 2 Open the front door. 3 Remove the used waste toner bottle. Maintaining the printer 21
  • Lexmark X952 | Maintenance Guide - Page 22
    4 Unpack the new waste toner bottle. 5 Insert the new waste toner bottle into the printer until it clicks into place. 6 Rotate the release lever counterclockwise to open the cover. Maintaining the printer 22
  • Lexmark X952 | Maintenance Guide - Page 23
    7 Lower the cover. 8 Slide out the printhead wipers. Maintaining the printer 23
  • Lexmark X952 | Maintenance Guide - Page 24
    9 Slide the printhead wipers back into place. 10 Close the cover. Maintaining the printer 24
  • Lexmark X952 | Maintenance Guide - Page 25
    11 Rotate the release lever clockwise to lock the cover. 12 Close the front door. 13 Turn the printer back on. Maintaining the printer 25
  • Lexmark X952 | Maintenance Guide - Page 26
    staple cartridge in the standard stapler unit 1 Open door G. 2 Grasp the handle of the staple cartridge holder, and then pull out the holder to the right. 3 Pull the staple cartridge out of the finisher. Note: Use just a slight force when removing the staple cartridge. Maintaining the printer 26
  • Lexmark X952 | Maintenance Guide - Page 27
    4 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge. 5 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge. Maintaining the printer 27
  • Lexmark X952 | Maintenance Guide - Page 28
    6 Push the staple cartridge into the finisher until it clicks into place. 7 Close door G. Replacing staple cartridge in the booklet stapler unit Note: This task is applicable only when a booklet finisher is installed. 1 Open door G. Maintaining the printer 28
  • Lexmark X952 | Maintenance Guide - Page 29
    2 Press the handles of the staple cartridge to the right, and then take the staple cartridge unit out of the finisher. Maintaining the printer 29
  • Lexmark X952 | Maintenance Guide - Page 30
    3 Hold the tabs on both sides of the staple cartridge. Maintaining the printer 30
  • Lexmark X952 | Maintenance Guide - Page 31
    4 Rotate the booklet staple cartridge at an angle. Maintaining the printer 31
  • Lexmark X952 | Maintenance Guide - Page 32
    staple cartridge out of the unit. 6 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge. 7 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge. Maintaining the printer 32
  • Lexmark X952 | Maintenance Guide - Page 33
    8 Return the cartridge to its original position, and then gently push the cartridge in until it clicks into place. 9 Return the unit to its original position. 10 Close door G. Maintaining the printer 33
  • Lexmark X952 | Maintenance Guide - Page 34
    is not covered by the printer warranty. Moving the printer to another location The printer and options can be safely moved to another location by following these precautions: • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
X950 Series
Maintenance Guide
June 2011
www.lexmark.com