Lexmark X954 Fax Guide
Lexmark X954 Manual
 |
View all Lexmark X954 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X954 manual content summary:
- Lexmark X954 | Fax Guide - Page 1
-edge-first or long-edge-first orientation. For more information, see "Supported paper sizes, types, and weights" section in the User's Guide. Sending a fax using the touch screen 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load - Lexmark X954 | Fax Guide - Page 2
in the PostScript driver under Configuration tab before it can be used. • If the Always display settings prior to faxing check box is into the ADF, then adjust the paper guides. 3 From the home screen, navigate to: Fax > > Browse shortcuts 4 Using the virtual keyboard, type the name or part of the - Lexmark X954 | Fax Guide - Page 3
guide printer. • Black/White Laser-Use when the original document was printed using a mono laser printer. • Inkjet-Use when the original document was printed using an inkjet printer on both sides). This also identifies what needs to be scanned for inclusion in the fax. • Orientation-Use to specify the - Lexmark X954 | Fax Guide - Page 4
page is scanned, the scanning is paused and a preview image appears. Delayed Send This lets you send a fax at a later time or date. 1 Set up your fax. 2 From the home screen, navigate to: Delayed Send > enter the date and time you want to send your fax > Done Note: If the printer is turned
-
1 -
2 -
3 -
4
 |
 |
Fax guide
The fax function lets you scan items and fax them to one or more recipients. You can send a fax from the printer by entering the
fax number, using a shortcut number, or using the address book.
Note:
You can load paper sizes in a short-edge-first or long-edge-first orientation. For more information, see “Supported paper
sizes, types, and weights” section in the
User's Guide
.
Sending a fax using the touch screen
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the home screen, touch
Fax
.
4
Enter the fax number or a shortcut using the touch screen or keypad.
To add recipients, touch
Next Number
and then enter the recipient's telephone number or shortcut number, or search the
address book.
Note:
To place a dial pause within a fax number, press
. The dial pause appears as a comma in the “Fax to” box. Use this
feature if you need to dial an outside line first.
5
Touch
Fax It
.
Sending a fax using the computer
The printer driver fax option allows you to “print to fax,” where the printer will send a queued document as a fax rather than
print it. The fax option functions as a normal fax machine, but is controlled through the printer driver instead of the printer
control panel.
1
With a document open, click
File
>
Print
.
2
Select the printer, and then navigate to:
Properties
>
Fax
tab >
Enable fax
3
Enter the recipient fax number(s) in the “Fax number(s)” field.
Fax numbers can be entered manually or by using the Phone Book feature.
4
If necessary, enter a prefix in the Dialing prefix field.
5
Select the appropriate paper size and page orientation.
6
If you want to include a cover page with the fax, then select
Include cover page with fax
, and enter the appropriate
information.
7
Click
OK
.
Fax guide
Page 1 of 4