Lexmark X954 IPDS Printer and Host Setup Guide
Lexmark X954 Manual
 |
View all Lexmark X954 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X954 manual content summary:
- Lexmark X954 | IPDS Printer and Host Setup Guide - Page 1
Lexmark Card for IPDS and Card for IPDS and SCS/TNe IPDS Printer and Host Setup Guide - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 2
, are the user's responsibility. Trademarks AFP, AS/400, IBM, iSeries, MVS, OS/2, OS/390, OS/400, Print Services Facility, PSF, System/390, zSeries, and z/OS are trademarks of International Business Machines Corporation in the United States, other countries, or both. Intelligent Printer Data Stream - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 3
and Host Setup Guide - Table of Contents TABLE OF CONTENTS Notices ...2 Table of Contents...3 Equipment Requirements and Specifications 4 Customer Support...5 1. iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server ...6 2. PSF/MVS LAN Printing - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 4
, X652de • Lexmark X654de, X656de • Lexmark X658de • Lexmark X734de, X736de, X738de • Lexmark X860de, X862de, X864de • Lexmark X792 • Lexmark X925 • Lexmark C950 • Lexmark X950, X952, X954 • Lexmark X548 • Lexmark 6500e Unless otherwise specified, in the rest of this guide the term "printer" covers - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 5
IPDS Printer and Host Setup Guide Equipment Requirements And Specifications Customer Support If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 6
for setting up the AS/400, or iSeries, and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 7
Printer and Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server Example PSFCFG with parameters to change shown in bold. PSF configuration PSFCFG > IPDSPRT1 (Note: IPDSPRT is a user defined name.) Library > Your LIB User - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 8
downloaded to the printer. When set to *YES, outline fonts are downloaded to the printer. When set to *NO, raster fonts are downloaded to the printer. to the printer. Refer to the IPDS Emulation User's Guide for additional information on capturing fonts. Step 3 Create a Printer Device Description - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 9
PUBLISHINF Support duplex *UNKNOWN Support color *UNKNOWN Pages per minute black *UNKNOWN Pages per minute color *UNKNOWN Location *BLANK Data streams supported *UNKNOWN + for more values Text 'Description TEXT > 'IPDS Printer' (Note: 'IPDS Printer' is user defined - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 10
TIp: To do this on printers, press the Select button ; on touch screens touch Network/Ports. 4 Now you will see a list of menus. Select the Standard Network menu. 5 Select Std Network Setup. 6 Select TCP/IP. 7 Use the navigation buttons or icons to scroll through the options. Check each of the - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 11
and Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server .) (Off, if you set the IP address another way.) Enable AutoIP Yes or No (Default is Yes. This is the recommended setting.) WINS Server Address 157.184.100.20 (Address - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 12
to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the IPDS job does not print, try the following. 1 If Busy or IPDS is not displayed in the printer control panel or if the printer remains in Ready mode, check to be sure the - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 13
check the default code page setting. Using the control panel MENU/Menus, select Option Card Menu > IPDS MENU > EMULATION > Default Codepage. On some printers Default Codepage. 6 If the job prints, but some bar codes print in the wrong size, refer to the Bar Code Size option in the IPDS User's Guide - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 14
the steps for setting up the MVS mainframe and printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 15
Troubleshooting Step 1 Choose a Printer Port for Printing IPDS Jobs Several printer ports are available for receiving IPDS jobs when using the printer Standard Network some older printers. NOTE: Some previous printers supported port 9100 for IPDS printing. If you are replacing a printer using port - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 16
and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Step 2 Define the printer to JES a) 8160 seconds. The default value is 0. If DISCINTV=0, the PSF does not end the printer session when no output is available. Refer to "Printer and Host Timeout Values - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 17
Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network /* SYSTEM FONTS */ // DD DSN=INST.FONTLIB,DISP=SHR/* USER FONTS */ // * // PSEG02 DD DSN=INST.PSEGLIB,DISP=SHR ALL DATA CHECKS */ // TRACE=NO, /* INTERNAL TRACE */ // MGMTMODE=OUTAVAIL, /* PRINTER MANAGEMENT MODE - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 18
printers, press the Select button ; on touch screens touch Network/Ports. 4 Now you will see a list of menus. Select the Standard Network menu. 5 Select Std Network Setup. 6 Select TCP/IP. 7 Use the navigation buttons or icons to scroll through the options. Check Yes or No (Default is Yes. This - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 19
to the IPDS Emulation User's Guide for information on these options and other IPDS MENU settings to format IPDS jobs. Note 1: On MFPs, "Copy Interrupt" is supported: an IPDS job can be interrupted by copy jobs and will resume printing automatically. Note 2: The supported printers and MFPs do not - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 20
to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the IPDS job does not print, try the following. 1 If Busy or IPDS is not displayed in the printer control panel or if the printer remains in Ready mode, check to be sure the - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 21
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 9 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 21 - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 22
through the steps for setting up PSF/2 and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or a MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 23
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) Settings. The TCP/IP Settings menu appears. Enter the IP address of the printer. The IP address should be obtained from your network administrator. Enter the TCP/IP port selected in Step 1. d) Select OK and - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 24
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server An OS/2 printer queue is now created and the printer is ready to print IPDS from OS/2 and a PSF/2 connected host. Note: You can check the connection using the PSF/2 Print Submitter. A number of AFP print files - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 25
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) On the PSF/2 Control Panel select Profile and then Change. c) Now select Tuning Options. The Job - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 26
TIp: To do this on printers, press the Select button ; on touch screens touch Network/Ports. 4 Now you will see a list of menus. Select the Standard Network menu. 5 Select Std Network Setup. 6 Select TCP/IP. 7 Use the navigation buttons or icons to scroll through the options. Check each of the - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 27
to the IPDS Emulation User's Guide for information on these options and other IPDS MENU settings to format IPDS jobs. Note 1: On MFPs, "Copy Interrupt" is supported: an IPDS job can be interrupted by copy jobs and will resume printing automatically. Note 2: The supported printers and MFPs do not - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 28
to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the IPDS job does not print, try the following. 1 If Busy or IPDS is not displayed in the printer control panel or if the printer remains in Ready mode, check to be sure the - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 29
Host Setup Guide Printer and Host Timeout Values 4. Printer and Host Timeout Values Selecting compatible values of the printer IPDS Timeout value and host release timers is very important when printing IPDS jobs. Selection of some values will cause communication problems between the printer and the - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 30
IPDS Printer and Host Setup Guide Printer and Host Timeout Values MVS host and Printer IPDS Timeout Values Printer IPDS Timeout Host Controlled Host Controlled 15 sec to 10 Min 15 sec to 10 Min STARTUP PROC STARTUP PROC Note Disconnect Interval (DISCINTV) Valid Port Number (PORTNO) Specific - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 31
Guide Printer Messages and Problems 5. Printer Messages and Problems Review these problems and solutions for possible answers to your questions. Use the table below if you are searching for information on a printer message or for keywords for a problem. Message (bold) or Problem Problem Network - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 32
for printing IPDS to the printer. Port 9100 is not supported for IPDS printing. Change the port selection on the host to 5001. If this does not resolve the issue, check the IP address and other network parameters defined for communicating with the printer. Problem 2: "1510 Incorrect DLE Installation - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 33
one or more of the following: A. Postscript or PCL resources may be saved in the printer memory. The memory cannot be used by IPDS. Set Resource Save to "Off" in the printer menu to allow permanent downloaded resources from PostScript and PCL jobs to be deleted. Try reprinting the job after powering - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 34
and Host Setup Guide Printer Messages and Problems requirements on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. D. The host may be downloading more IPDS resources than can be held in the printer's memory. Add more - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 35
with the printer code. Download the correct IPDS emulation version. See the section on support (page 5) for firmware update information. Problem 10: 34 Incorrect Media 34 Incorrect Media appears on the display Solution to Problem 10 A. Load the correct paper size and/or check tray paper guides to be - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 36
IPDS printing. The message indicates there is less than 256 MB of memory in the printer. Add additional DRAM to bring the installed total to 256 MB or more of installed memory. IPDS should function normally with the extra memory. For all other 900.40 Firmware errors, contact technical support. 36 - Lexmark X954 | IPDS Printer and Host Setup Guide - Page 37
IPDS Printer and Host Setup Guide Printer Messages and Problems 37
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
 |
 |
Lexmark
Card for IPDS
and
Card for IPDS and SCS/TNe
IPDS Printer and Host Setup Guide