Lexmark Xs463de User Guide - Page 187

Menu item Timeouts Power Saver Mode Disabled 2-240 Timeouts Screen Timeout 15-300 Timeouts Print Timeout Disabled 1-255 Timeouts Wait Timeout Disabled 15-65535 Timeouts Job Hold Timeout Disabled 5-255 Print Recovery Auto Continue Disabled 5-255 Description Specifies the number of minutes of inactivity before some systems begin entering a minimum power state. Notes: • 30 minutes is the factory default setting. • Power Saver does not interact with Standby Mode. Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state Note: 30 seconds is the factory default setting. Sets the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job Notes: • 90 seconds is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL or PPDS emulation. This setting has no effect on PostScript emulation print jobs. Sets the amount of time in seconds the printer waits for additional data before canceling a print job Notes: • 40 seconds is the factory default setting. • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL or PPDS emulation print jobs. Sets the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue Notes: • 30 seconds is the factory default setting. • This menu item appears only when a printer hard disk is installed. Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period Notes: • Disabled is the factory default setting. • 5-255 is a range of time in seconds. Understanding printer menus 187