LiftMaster 87504-267 Owners Manual - English

LiftMaster 87504-267 Manual

LiftMaster 87504-267 manual content summary:

  • LiftMaster 87504-267 | Owners Manual - English - Page 1
    LED Garage Door Openers Belt Drive Models - 87504-267, 84505R Chain Drive Models - 87802, 84602 FOR RESIDENTIAL USE ONLY l• Please read this manual and the safety materials carefully! l Periodic checks of the garage door opener are required to ensure safe operation. l This garage door opener is
  • LiftMaster 87504-267 | Owners Manual - English - Page 2
    Table of Contents Troubleshooting 43 Preparation 6 Accessories 45 Carton Inventory 87504-267 7 Warranty 46 Carton Inventory 87802 7 Carton Inventory 84505R 8 Repair Parts 49 Carton Inventory 84602 9 Model 87504-267
  • LiftMaster 87504-267 | Owners Manual - English - Page 3
    Word Review This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the instructions and warnings contained in this manual. When you see these Safety Symbols and Signal Words on the following pages
  • LiftMaster 87504-267 | Owners Manual - English - Page 4
    Wi-Fi range extender For compatible router specifications and help, visit support.liftmaster.com. See page 36 to connect the garage door opener door halfway up. Release the door. If balanced, it should stay in place, supported entirely by its springs. 3. Raise and lower the door to check for binding
  • LiftMaster 87504-267 | Owners Manual - English - Page 5
    Preparation Tools Needed 5/32 3/16 5/16 7/16 1/2 5/8 1/4 7/16 9/16 5
  • LiftMaster 87504-267 | Owners Manual - English - Page 6
    model, other accessories may be included with your garage door opener. The instructions for these accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are for reference and your product may look different. A. Header bracket B. Pulley
  • LiftMaster 87504-267 | Owners Manual - English - Page 7
    instructions for these accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are P. Rail grease Q. Remote control(s) R. Battery S. Chassis support bracket Hardware Chassis Support Bracket Hardware Screw #8-32 x 3/8" (1) Hex Bolts 1/4"-
  • LiftMaster 87504-267 | Owners Manual - English - Page 8
    model, other accessories may be included with your garage door opener. The instructions for these accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are for reference and your product may look different. A. Header bracket B. Pulley
  • LiftMaster 87504-267 | Owners Manual - English - Page 9
    model, other accessories may be included with your garage door opener. The instructions for these accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are for reference and your product may look different. A. Header bracket B. Pulley
  • LiftMaster 87504-267 | Owners Manual - English - Page 10
    Assembly 1 Attach the Belt Rail to the Garage Door Opener 87504-267, 84505R To avoid possible SERIOUS INJURY to finger from moving garage door opener: • ALWAYS keep hand clear of sprocket while operating opener. • Securely attach sprocket cover BEFORE operating. To avoid SERIOUS damage to garage
  • LiftMaster 87504-267 | Owners Manual - English - Page 11
    Assembly 1 Attach Chain Rail to the Garage Door Opener Model 84602 To avoid possible SERIOUS INJURY to finger from moving garage door opener: • ALWAYS keep hand clear of sprocket while operating opener. • Securely attach sprocket cover BEFORE operating. HARDWARE Washered Bolt 5/16"-18x1/2" (
  • LiftMaster 87504-267 | Owners Manual - English - Page 12
    Attach the chain spreader to the garage door opener with screws. 6. Guide the chain around the selected groove in the chain spreader. HARDWARE To #8-32 x 3/8" screw through the back flange and the hole in rail support. Lock Washer Hex Bolt 1/4"-20x5/8" Screw #8-32x3/8" Washerd Bolt 5/16"-18x1
  • LiftMaster 87504-267 | Owners Manual - English - Page 13
    Assembly 3 Tighten the Chain 1. Loosen the inner nut and lock washer on the trolley threaded shaft. 2. Tighten the outer nut until the chain is a 1/2" above the base of the rail at the midpoint of the rail. 3. Re-tighten the inner nut. Slack in the chain is normal when the door is closed. No
  • LiftMaster 87504-267 | Owners Manual - English - Page 14
    with vehicles to avoid accidental release. 7. NEVER connect garage door opener to power source until instructed to do so. 8. NEVER wear watches, rings or loose clothing while installing or servicing opener. They could be caught in garage door or opener mechanisms. 9. Install wall-mounted garage
  • LiftMaster 87504-267 | Owners Manual - English - Page 15
    you need to install the header bracket on a 2x4 (on wall or ceiling), use lag screws (not provided) to securely fasten the 2x4 to structural supports. Open your door to the highest point of travel as shown. Draw an intersecting horizontal line on the header wall 2" (5 cm) above the high point
  • LiftMaster 87504-267 | Owners Manual - English - Page 16
    wall above the garage door, or to the ceiling. Follow the instructions which will work best for your particular requirements. Do not install the toward the ceiling). Wall Mount (Header Wall) 2x4 Structural Support Horizontal Line Header Bracket Vertical Centerline of Garage Door Lag Screw
  • LiftMaster 87504-267 | Owners Manual - English - Page 17
    release arm down to disconnect the inner and outer trolley. Slide the outer trolley toward the garage door opener. The trolley can remain disconnected until instructed. Ring Fastener Clevis Pin 5/16" X 2-3/4" Connected Disconnected 17
  • LiftMaster 87504-267 | Owners Manual - English - Page 18
    a falling garage door opener, fasten it SECURELY to structural supports of the garage. Concrete anchors MUST be used if installing ANY the bracket is not centered above the door). 7. Remove the 2x4. Operate the door manually. If the door hits the rail, raise the header bracket. NOTE: DO NOT connect
  • LiftMaster 87504-267 | Owners Manual - English - Page 19
    Installation 6 Attach the Emergency Release Rope and Handle To prevent possible SERIOUS INJURY or DEATH from a falling garage door: • If possible, use emergency release handle to disengage trolley ONLY when garage door is CLOSED. Weak or broken springs or unbalanced door could result in an open door
  • LiftMaster 87504-267 | Owners Manual - English - Page 20
    long enough to be secured to two or three vertical supports. A vertical reinforcement brace should cover the height of the top panel. Contact the garage door manufacturer or installing dealer for opener reinforcement instructions or reinforcement kit. NOTE: Many door reinforcement kits provide for
  • LiftMaster 87504-267 | Owners Manual - English - Page 21
    Installation 8 Connect the Door Arm to the Trolley IMPORTANT: The groove on the straight door arm MUST face away from the curved door arm. 1. Close the door. Disconnect the trolley by pulling the emergency release handle. Slide the outer trolley back (away from the door) about 2" (5 cm). 2. Attach
  • LiftMaster 87504-267 | Owners Manual - English - Page 22
    Control Panel 1 Install the Control Panel To prevent possible SERIOUS INJURY or DEATH from electrocution: • Be sure power is NOT connected BEFORE installing control panel. • Connect control panel ONLY to 12 VOLT low voltage wires. To prevent possible SERIOUS INJURY or DEATH from a closing garage
  • LiftMaster 87504-267 | Owners Manual - English - Page 23
    tip. 3 Attach the Warning Labels 1. Attach the entrapment warning label on the wall near the control panel with tacks or staples. 2. Attach the manual release/safety reverse test label in a visible location on the inside of the garage door. Push bar RED WHITE WHITE GREY COMMAND LED 23
  • LiftMaster 87504-267 | Owners Manual - English - Page 24
    Install the Protector System® Introduction Be sure power is NOT connected to the garage door opener BEFORE installing the safety reversing sensor. To prevent SERIOUS INJURY or DEATH from closing garage door: • Correctly connect and align the safety reversing sensor. This required safety device MUST
  • LiftMaster 87504-267 | Owners Manual - English - Page 25
    Nut (2) The safety reversing sensors are designed to clip onto the door track with the provided sensor brackets. If the door track will not support the sensor bracket a wall installation is recommended. The sensor beam should be NO HIGHER than 6" (15 cm) above the floor. DOOR TRACK INSTALLATION
  • LiftMaster 87504-267 | Owners Manual - English - Page 26
    Install the Protector System® FLOOR INSTALLATION 1. Measure the position of both sensor brackets so they will be the same distance from the wall and unobstructed. 2. Attach the bracket to the floor with concrete anchors (not provided). 3. Slide the hex screw through the sensor. 4. Attach the sensor
  • LiftMaster 87504-267 | Owners Manual - English - Page 27
    Install the Protector System® OPTION B - PRE-WIRED INSTALLATION 1. Cut the sensor wires, making sure there is enough wire to reach the pre-installed wires from the wall. 2. Separate the sensor wires and strip insulation from each end. Choose two of the pre-installed wires and strip insulation from
  • LiftMaster 87504-267 | Owners Manual - English - Page 28
    Power 1 Connect Power To prevent possible SERIOUS INJURY or DEATH from electrocution or fire: • Be sure power is NOT connected to the opener, and disconnect power to circuit BEFORE removing cover to establish permanent wiring connection. • Garage door installation and wiring MUST be in compliance
  • LiftMaster 87504-267 | Owners Manual - English - Page 29
    garage door opener has power, check the safety reversing sensors. If the sensors are aligned and wired correctly, both LEDs will glow steadily. SAFETY SENSOR TROUBLESHOOTING If either of the sensor LEDs are off, there is no power to the sensor: 1. Check that you have power to the garage door opener
  • LiftMaster 87504-267 | Owners Manual - English - Page 30
    been set. Please restart the Program the Travel process. 2 - Automatic Force Set Up Once both the up and down positions have been manually set, the Safety Reversing Sensors will reconnect and become operational. Then, the opener will enter a force-sensing operation by automatically moving the door
  • LiftMaster 87504-267 | Owners Manual - English - Page 31
    Adjustments 3 - Test the Safety Reversal System 4 - Test the Protector System® Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door. • Safety reversal system MUST be tested every month. • After ANY
  • LiftMaster 87504-267 | Owners Manual - English - Page 32
    to persons: • Disconnect ALL electric and battery power BEFORE performing ANY service or maintenance. • Use ONLY LiftMaster part # 485LM for replacement battery . Battery may explode. Check with local codes for disposal instructions. ALWAYS wear protective gloves and eye protection when changing the
  • LiftMaster 87504-267 | Owners Manual - English - Page 33
    Battery Backup* Battery Status LED GREEN LED: All systems are normal. • A solid green LED light indicates the battery is fully charged. • A flashing green LED indicates the battery is being charged. ORANGE LED: The garage door opener has lost power and is in battery backup mode. • Solid orange LED
  • LiftMaster 87504-267 | Owners Manual - English - Page 34
    To reduce the risk of SEVERE INJURY or DEATH: 1. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS. 2. ALWAYS keep remote controls out of reach of children. NEVER permit children to operate or play devices and features are to be used ONLY with sectional doors. 17. SAVE THESE INSTRUCTIONS. 34
  • LiftMaster 87504-267 | Owners Manual - English - Page 35
    Operation Features Your garage door opener is equipped with features to provide you with greater control over your garage door operation. ALERT2CLOSE The Alert2Close feature provides a visual and an audible alert that an unattended door is closing. TIMER-TO-CLOSE (TTC)* The TTC feature
  • LiftMaster 87504-267 | Owners Manual - English - Page 36
    your mobile device has the latest software. 2. Download the latest version of the myQ® App. For more information on connecting your garage door opener, visit support.LiftMaster.com. Google Play and the Google Play logo are trademarks of Google LLC. App Store and the Apple and App Store logos are
  • LiftMaster 87504-267 | Owners Manual - English - Page 37
    Up the Camera - Models 87504-267 and 84505R 1. Download the myQ® app and setup your account if you haven't already, see page 36. 2. Follow the instructions in the app to setup and use the camera. The camera powers up when it is opened and powers down when closed. LED Camera Camera
  • LiftMaster 87504-267 | Owners Manual - English - Page 38
    If there is a problem with the garage door opener the screen will display the Diagnostic Code. Refer to the Troubleshooting section. The following garage door opener needs to be serviced (approximately 4500 garage door opener cycles) the command (yellow) and service (red) LEDs will begin to
  • LiftMaster 87504-267 | Owners Manual - English - Page 39
    sensor off/on, and turn the entry light feature off/on. Adjust the contrast of the screen. SERVICE Press and hold the LIGHT button, then press the second navigation button to view the Service menu. Displays software version information. Turn the Maintenance Alert (MAS) on/off. Displays the number of
  • LiftMaster 87504-267 | Owners Manual - English - Page 40
    Operation 1 2 Press to continue. 3 Press to continue. 1. Press and hold the black adjustment button on the garage door opener until 3 beeps are heard (Approximately 6 seconds). ERASE THE CAMERA SETTINGS 1. Press and hold black adjustment button on the garage door opener until 3 beeps are
  • LiftMaster 87504-267 | Owners Manual - English - Page 41
    the open position. 3. Pull the emergency release handle down and back (toward the garage door opener). The garage door can then be raised and lowered manually as necessary. 4. To reconnect the trolley, pull the emergency release handle straight down. The trolley will reconnect on the next UP or DOWN
  • LiftMaster 87504-267 | Owners Manual - English - Page 42
    Maintenance Maintenance Schedule EVERY MONTH • Manually operate door. If it is unbalanced or binding, call a trained radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
  • LiftMaster 87504-267 | Owners Manual - English - Page 43
    Troubleshooting Diagnostic Chart Your garage door opener is programmed with self- module and at the logic board. Replace travel module if necessary. No movement, only a single click. Manually open and close the door. Check for binding or obstructions, such as a broken spring or door lock,
  • LiftMaster 87504-267 | Owners Manual - English - Page 44
    Troubleshooting DIAGNOSTIC CODE SYMPTOM SOLUTION Up Arrow Flash (es) Down Arrow Flash (es) 4 1-4 Door is moving, stops or reverses. Opener beeps and lights flash. Manually support service instructions to set up the camera. To troubleshoot the optional automatic garage door lock model 841LM, see
  • LiftMaster 87504-267 | Owners Manual - English - Page 45
    Accessories 878MAX MAX Wireless Keyless Entry: For use outside of the home to enable access to the garage using a 4-digit PIN. Works with ALL LiftMaster openers from 1993-present. 893MAX 3-Button MAX Remote Control: Compatible with LiftMaster garage door openers manufactured since 1993. Includes
  • LiftMaster 87504-267 | Owners Manual - English - Page 46
    this product. You will be advised of disassembly and shipping instructions. Then send the product or component, pre-paid and insured, as directed to our service center for warranty repair. Please include a brief description of the problem and a dated proof-of-purchase receipt with any product
  • LiftMaster 87504-267 | Owners Manual - English - Page 47
    opener to ensure they function in a safe and trouble-free manner. Be sure to read all Important Safety Information found in your garage door opener's manual as it provides more details and safety considerations than can be supplied with this guide. Garage Door Openers are Not Toys Discuss garage
  • LiftMaster 87504-267 | Owners Manual - English - Page 48
    TENSION. ONLY QUALIFIED INDIVIDUALS SHOULD ADJUST THEM. Visually check the door and installation: • Starting with the door in the closed position, use the manual disconnect on the opener to disconnect the door. • Look for signs of wear or damage on hinges, rollers, springs, and door panels. • These
  • LiftMaster 87504-267 | Owners Manual - English - Page 49
    White and red/white wire 10 3V CR2032 lithium battery 11 Extension bracket (optional) Not Shown Installation hardware bag User's Guide Owner's Manual Part Number 041B0035B 041A5047-1 041A2828 041A4353-1 K029B0137 041-0155-000 041-0136 4178B0034B 041B4494-1 K010A0020 041A5281-1 041A2770-17 114-5835
  • LiftMaster 87504-267 | Owners Manual - English - Page 50
    Repair Parts Garage Door Opener Parts Model 87504-267 14 6 7 1 10 11 12 9 15 4 2 8 5 3 13 7 6 Description 1 Sprocket and Sprocket Cover with Screws 2 End panel 3 Integrated LED Light Module 4 Badge with camera 5 Main Enclosure Cover 6 Control door panel 7 End panel cover 8 Motor with travel
  • LiftMaster 87504-267 | Owners Manual - English - Page 51
    arm 4178B0034B 10 1 9 White and red/white wire 041B4494-1 11 10 3V CR2032 lithium battery K010A0020 9 11 Extension bracket (optional) 041A5281-1 Not Shown Owner's manual 114-5518-000 Multi-function Control Panel 880LMW Remote Control 893LM Installation hardware bag 041A2770-17 51
  • LiftMaster 87504-267 | Owners Manual - English - Page 52
    Repair Parts Garage Door Opener Parts Model 87802 15 7 8 11 12 1 2 3 13 9 10 6 4 5 14 8 7 Description 1 Chassis Support Bracket 2 Chain Spreader & Sprocket 3 End Panel, Battery Acces 4 Light Pod Kit, No Camera 5 Badge 6 Main Enclosure Cover 7 Control Door Panel 8 End panel cover 9 Motor
  • LiftMaster 87504-267 | Owners Manual - English - Page 53
    arm 4178B0034B 10 1 9 White and red/white wire 041B4494-1 11 10 3V CR2032 lithium battery K010A0020 9 11 Extension bracket (optional) 041A5281-1 Not Shown Owner's manual 114-5518-000 Multi-function Control Panel 886LMW Remote Control 893LM Installation hardware bag 041A2770-17 53
  • LiftMaster 87504-267 | Owners Manual - English - Page 54
    Repair Parts Garage Door Opener Parts Model 84602 14 6 7 10 11 12 9 1 2 8 5 13 7 6 3 4 Description 1 Sprocket and Sprocket Cover with Screws 2 Non-logic borad end panel 3 Integrated LED Light Module 4 Badge 5 Main Enclosure Cover 6 Control door panel 7 End panel cover 8 Motor with travel
  • LiftMaster 87504-267 | Owners Manual - English - Page 55
    wire 10 3V CR2032 lithium battery 11 Extension bracket (optional) Not Shown Installation hardware bag Multi-function Control Panel Owner's manual Part Number 041B0035B 041A5047-1 041A2828 041A4353-1 K029B0137 041-0155-000 041-0136 4178B0034B 041B4494-1 K010A0020 041A5281-1 041A2770-17 882LMW 114
  • LiftMaster 87504-267 | Owners Manual - English - Page 56
    INFORMATION Visit us online at: LiftMaster.com Before calling, please have the model number of the garage door opener. If you are calling about a troubleshooting issue, it is recommended that you have access to your garage door opener while calling. If you are ordering a repair part please have the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Smart LED Garage Door Openers
Belt Drive Models - 87504-267, 84505R
Chain Drive Models - 87802, 84602
FOR RESIDENTIAL USE ONLY
l
Please read this manual and the safety
materials carefully!
l
Periodic checks of the garage door opener
are required to ensure safe operation.
l
This garage door opener is ONLY
compatible with myQ® and Security+ 2.0®
accessories.
l
DO NOT install on a one-piece door if using
devices or features providing unattended
close. Unattended devices and features
are to be used ONLY with sectional doors.
l
Attach warning labels to the location
indicated on label.
LiftMaster
300 Windsor Drive
Oak Brook, IL 60523