LiftMaster GH GT- Logic 4 Installation Manual - Page 17
Hoist And Jackshaft - o m manual
View all LiftMaster GH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
MOUNTING 1 Place the door sprocket on the door shaft. 2 Place the operator drive sprocket on the appropriate side of the operator for your installation type. 3 Wrap the drive chain around the door sprocket and the drive sprocket then secure with the master link. 4 Align the door and the drive sprockets. Insert keys and fasten the sprockets with the set screws. NOTE: It is highly recommended to add a thread adhesive to secure the set screws in place. 1 4 3 2 HOIST AND JACKSHAFT INSTALL THE MANUAL DISCONNECT 1 Fasten Door retaining bracket 4 feet above the floor. 1 Door retaining bracket Door retaining bracket 17 Typical installation - Hoist and Jackshaft
17
HOIST AND JACKSHAFT
Typical installation - Hoist and Jackshaft
MOUNTING
INSTALL THE MANUAL DISCONNECT
1
1
2
3
Place the door sprocket on the door shaft.
Fasten Door retaining bracket 4 feet above the floor.
Door retaining bracket
Door retaining bracket
Place the operator drive sprocket on the appropriate side of the
operator for your installation type.
Wrap the drive chain around the door sprocket and the drive
sprocket then secure with the master link.
4
Align the door and the drive sprockets. Insert keys and
fasten the sprockets with the set screws.
NOTE:
It is highly
recommended to add a thread adhesive to secure the set
screws in place.
1
2
3
4
1