LiftMaster LA400 LA400 Manual - Page 25
» Connect The Gate Operator Gate 2 To The Control Box Model La400-s Only - solar
UPC - 753182403953
View all LiftMaster LA400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
WIRING » CONNECT THE GATE OPERATOR (GATE 2) TO THE CONTROL BOX (MODEL LA400-S ONLY) CONNECT THE GATE OPERATOR (GATE 2) TO THE CONTROL BOX (MODEL LA400-S ONLY) Before digging, contact local underground utility locating companies. 1 Trench across driveway to bury the extension cable. Use PVC conduit to prevent damage to cables. 2 Select hole in bottom of the control box to be used for the extension cable. Insert extension cable through watertight connector nut and through an available watertight connector mounted in the control box. 3 Extend cable and wires to Gate 2 connector and connect as shown. 4 Secure extension cable to control box using watertight connector nut. Control Box PTpDtKiMhlmeEoadiEyseneoPioeswnnttvCirtttliLiherhaIantEeonnncAusggcjhtRaumeiptl!GdeirursGriysaoeaaftrronteuteorwaoesmv.rapeereaChsnDryeiiacnaptmelgeean.oasrtahvottCeeehnaglaeytanutaternsayonerce Gate Operator (Gate 2) Gate Operator (Gate 1) 1 Junction Box Extension Cable PVC conduit at least 18" (45.7 cm) below ground level (grade) Terminal blocks can be removed to simplify wiring. ACCESSORY R9Ø POWER 24V GATE 2 BRN GRN WHT YEL BLU RED 3 R4 C2 D15 R196 24 VAC/ SOLAR INPUT 10A 32V P1 U4 MAX C13 C4 F6 F2 GATE 1 BRN GRN WHT YEL BLU RED GATE 2 BRN GRN WHT YEL BLU RED 2 Operator Cable 4 Extension Cable PVC Conduit 24