LiftMaster MT MT5011E Installation Manual

LiftMaster MT Manual

Get LiftMaster MT PDF manuals and user guides View all LiftMaster MT manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster MT manual content summary:

  • LiftMaster MT | MT5011E Installation Manual - Page 1
    INSTALLATION MANUAL MODEL MT5011E/BMT5011E MEDIUM DUTY DOOR OPERATOR RaNdoBiwuoiRlwteiitcnheiver INTENDED FOR PROFESSIONAL INSTALLATION ONLY Visit www.LiftMaster.com to locate a professional installing dealer in your area. 2 YEAR WARRANTY Serial # (located on electrical box) Installation Date
  • LiftMaster MT | MT5011E Installation Manual - Page 2
    attempting to install, operate or maintain the operator, you must read and fully understand this manual and follow all safety instructions. WARNING • DO NOT attempt repair or service of your commercial door and gate operator unless you are an Authorized Service Technician. WARNING CAUTION
  • LiftMaster MT | MT5011E Installation Manual - Page 3
    manufacturer. • Radio receiver: A factory installed radio receiver allows remote controls, keyless entries and other remote command devices to be programmed to the operator. • Timer To Close: The Timer To Close feature allows the door to automatically close after a preset time (only available with
  • LiftMaster MT | MT5011E Installation Manual - Page 4
    emergency manual door operation. ENTRAPMENT PROTECTION: . . . . Supports both monitored and non-monitored safety devices including LiftMaster CPS photo-eyes and industry standard sensing edges. ENVIRONMENTAL LOCATION Indoor, dry location OPERATING TEMPERATURE 4˚ F to +122˚F (-20C˚ to + 50˚C) 4
  • LiftMaster MT | MT5011E Installation Manual - Page 5
    check that all components were provided. 15 1 14 ^ ^OPEN CLOSE O STOP 8 4 10 9 7 2 12 3 13 11 6 5 ITEM DESCRIPTION QTY 1 Operator 1 2 Track (left & right) Door height plus 2' 2 3 Track Spacers 2 4 Front Idler 1 5 Trolley 1 6 Take-up Bolt 1 7 Chain 1 8 Master Links
  • LiftMaster MT | MT5011E Installation Manual - Page 6
    ' doors use 3 spacers. Track Spacers Header End Flange Hex Nut Bolt 3/8" - 16 x 3/4" Track Operator End Bolt 3/8" - 16 x 3/4" Flange Hex Nut 2 Install front idler Front Idler Header End Track Bolt 3/8" -16 x 1" Lock Washer Header End Lock Washer Bolt 3/8" -16 x 1" 3 Assemble trolley Trolley
  • LiftMaster MT | MT5011E Installation Manual - Page 7
    onto the track ASSEMBLY Track Operator End Track Trolley Operator End Trolley 5 Attach track to operator Flange Hex Nut Track Flange Hex Nut Bolt 3/8" - 16 x 3/4" Operator End Bolt 3/8" - 16 x 3/4" Operator 7 Header End Bolt 3/8" - 16 x 3/4" Flange Hex Nut Bolt 3/8" - 16 x 3/4"
  • LiftMaster MT | MT5011E Installation Manual - Page 8
    Run chain around track in the direction indicated Slide trolley 2" away from front idler 2" Wrap chain around drive sprocket Operator Drive Sprocket Attach chain to back of trolley Adjust the chain by tightening the inner nut Trolley Chain Inner Nut Master Link Bottom of Track 3" Chain
  • LiftMaster MT | MT5011E Installation Manual - Page 9
    INSTALLATION DETERMINE HEADER BRACKET MOUNTING LOCATION The trolley operator is generally mounted over the center of the door. However, off center mounting may be required due to interfering structures or location of door stile / top section support. Typically, the operator may be mounted up to 24
  • LiftMaster MT | MT5011E Installation Manual - Page 10
    call a trained door systems technician if door binds, sticks, Aor iVs oEut Rof bTalaInSceS. EMENT 4 Secure headeAr bTracTkeEt NTION 5 Attach rail to header bracket and position operator Swing the operator to a horizontal position and temporarily secure with rope, chain or support from floor. Make
  • LiftMaster MT | MT5011E Installation Manual - Page 11
    SERIOUS INJURY from a falling operator, fasten it SECURELY to structural supports of the garage. Concrete anchors MUST be used if installing ANY brackets into masonry. Lock Nut Washer Bolt (Not Provided) Bolt (Not Provided) 7 Attach door arm to trolley and door AVERTISSEMENT Bolt Nut (Not
  • LiftMaster MT | MT5011E Installation Manual - Page 12
    service. • Disconnect power at the fuse box BEFORE proceeding. Operator MUST be properly grounded and connected in accordance with local electrical codes. The operator ERTISSEMENTPOWER WIRING CHART ON AVERTISSEMENT NOTE: Power and control wiring must be run in separate conduit in accordance
  • LiftMaster MT | MT5011E Installation Manual - Page 13
    out of sight of the door. • Or ANY other control (automatic or manual) is used. Reversing devices are recommended for ALL installations. Select appropriate knockout and run wire according to local electrical code from operator to 3-button control station. AVERTISSEMENT ATTENTION ^OPEN CLOSE O STOP
  • LiftMaster MT | MT5011E Installation Manual - Page 14
    retaining plate Adjust OPEN limit Retaining Plate OPEN Limit Nut OPEN Limit Switch CLOSE Limit Nut AVERTISSEMENCLTOSE Limit Switch ATTENTION Increase Door Travel Adjust CLOSE limit Increase Door Travel Decrease Door Travel AVERTISSEMENT AVERTISSEMENT Decrease Door Travel SAFETY Limit Switch
  • LiftMaster MT | MT5011E Installation Manual - Page 15
    Re-tighten nut until there is just enough tension to permit smooth operation. • Secure clutch nut with cotter pin. Remove Tape Holding the door is closing, the door will stop and typically reverse to the full open position. The photo eyes must be installed facing each other across the door, no
  • LiftMaster MT | MT5011E Installation Manual - Page 16
    ANT X ANT TTC ^^^^ 1 LEARN STOP CLOSE OPEN LEDD14 2 3 45 LMEP1 LMEP2 COM INTRLK STOP CLOSE OPEN 67 OPTIONAL SAFETY DEVICE CONFIGURATIONS CPS Photo-Eyes (White) (White/Black) NOTE: When installing model CPS-LN4, connect the brown wire to terminal 1 and the blue wire to terminal 2. CPS
  • LiftMaster MT | MT5011E Installation Manual - Page 17
    Button Purple Wire Antenna Auxiliary Antenna Connection LED Field Wiring Terminal Factory Wiring Connector FUNCTION Open Door Close Door Stop Door Programs the remote controls and performs additional programming Programs the Timer to Close Primary Antenna For use with external antenna kit EXT-ANT
  • LiftMaster MT | MT5011E Installation Manual - Page 18
    sight of the door. • Or ANY other control (automatic or manual) is used. Reversing devices are recommended for ALL installations. AVERTISSEMENT ATTENTION B C2 WIRING TYPE WITH MONITORED SAFETY DEVICE • Momentary contact to open and stop with constant pressure to close. • Open override that reverses
  • LiftMaster MT | MT5011E Installation Manual - Page 19
    BASIC PROGRAMMING B2 WIRING TYPE WITHOUT MONITORED SAFETY DEVICE C Requires a non-monitored safety device. • Momentary contact to open, close and stop. • Open override that reverses when closing by any opening device. • Wiring for safety device to reverse. NOTE: The operator will automatically
  • LiftMaster MT | MT5011E Installation Manual - Page 20
    COM INTRLK STOP CLOSE OPEN LEARN STOP CLOSE OPEN LEDD14 1 2 3 4 5 OPEN 6 7 MEP1 LMEP2 COM INTRLK STOP CLOSE OPEN 3-BUTTON REMOTE CONTROL TO OPERATE AS A WIRELESS 3-BUTTON CONTROL STATION NOTE: The feature will use 3 of the 20 memory channels in the operator. TO PROGRAM 1. Press and hold
  • LiftMaster MT | MT5011E Installation Manual - Page 21
    B2 wiring type and compatible LiftMaster remote control. In C2 wiring the remote control will open the door only. 1. Press remote control button. 2. Door should open. Allow the door to fully open. 3. Press remote control button. 4. Door should close. Allow door to fully close. ADVERTENCIA PRECAUCI
  • LiftMaster MT | MT5011E Installation Manual - Page 22
    operation problem OPERATOR MOVES IN OPEN and CLOSE button wiring THE WRONG DIRECTION connection reversed DOOR DRIFTS AFTER OPERATOR STOPS A) Door not balanced properly ➤ Verify brake assembly operation and wiring. ➤ Disconnect trolley and check door for proper operation. ➤ Check 3-button control
  • LiftMaster MT | MT5011E Installation Manual - Page 23
    Sensing Edge and/or wiring. Reverse the yellow and red motor wires on the capacitor. Check clutch adjustment. Door height or speed may exceed the range the operator can travel. Call Technical Support for assistance. Replace Logic Board. NOTE: It is normal for the logic board LED to flash 7 times
  • LiftMaster MT | MT5011E Installation Manual - Page 24
    Duty "E", 315 MHz K4 K1A6424-3 Logic Board Assembly, Medium Duty "E", 390 MHz K5 K74-31243 MOV assembly * To order complete electrical box kit, add a (K-) prefix to the model number for the operator. SERVICE KITS ITEM 1 2 3 4 PART # 13-10024 23-10041 29-10338 K10-33850 DESCRIPTION Limit
  • LiftMaster MT | MT5011E Installation Manual - Page 25
    REPAIR PARTS 1 2 K6 3 4 21 K1 5 20 K3 14 15 17 15 14 K2 14 7 6 14 6 18 8 K5 16 9 10 11 12 K4 13 K1 19 25
  • LiftMaster MT | MT5011E Installation Manual - Page 26
    PARTS SERVICE KITS ITEM K1 K2 K3 K4 K5 K6 PART # DESCRIPTION K75-33877 Brake assembly kit, Medium duty Complete with: Brake hub/pulley, brake release lever assembly, brake solenoid and bracket, springs and cotter pin. K20-5150-LD-1 Motor Kit, Medium Duty 1/2 hp, 115 Volt. K75-12870 Door
  • LiftMaster MT | MT5011E Installation Manual - Page 27
    Monitored PRESS TO Includes visor clip. CPS-LN4 Commercial Protector System®: R ING OPEN Provides protection on doors up to 45' wide. NEMA-4 rated. OPEN 373LM 333LM OPEN WPB1LM WPB3LM WKP5LM 123 456 789 * 0# 3-Button SECURITY✚® Remote Control: Includes visor clip. 3-Button Tri-Colored Dip
  • LiftMaster MT | MT5011E Installation Manual - Page 28
    1. The 3-Button Control Station provided must be connected for operation. 2. If a Commercial Door Operator. 3 BUTTON STATION OR 3 POSITION KEYSWITCH WITH SPRING RETURN TO CENTER AND STOP BUTTON STANDARD 7635 2 OR MORE 7635 KEY LOCKOUT 7635 Open Close Stop Open Close Stop Open Close Stop Open
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Serial #
(located on electrical box)
Installation Date
2
YEAR
WARRANTY
NOT FOR RESIDENTIAL USE
I N S T A L L A T I O N
M A N U A L
I N S T A L L A T I O N
M A N U A L
MODEL MT5011E/BMT5011E
MEDIUM DUTY DOOR OPERATOR
Now with
Built in
Radio Receiver
Radio Receiver
Built on Board
315MHz
INTENDED FOR PROFESSIONAL
INTENDED FOR PROFESSIONAL
INSTALLATION ONLY
INSTALLATION ONLY
A SAFETY DEVICE IS HIGHLY RECOMMENDED.
Visit www.LiftMaster.com to locate a professional installing dealer in your area.