Linksys SPA2102-AN Fax Guide

QUICK INSTALL GUIDE

Fax Extension for the Linksys SPA 2102 ATA

Quick Activation and Installation Guide

Welcome to Fax Extension Service with 8x8 Virtual Office!

Getting your Fax Extension Service up and running on your Linksys SPA 2102 Analog

Terminal Adaptor takes just a few minutes.

Activating Your Linksys ATA

You will need your activation code to activate your Linksys ATA. The activation code was

sent via email. You can also retrieve it in the 8x8 Account Manager by following these

instructions:

1. Go to

www.8x8.com

, click

Sign-In

and select

Account Manager

.

2. Enter your administrator username and password.

3. Click

Phone System

from the top naviation bar and select

Extensions

.

4. Click

Activate Device

next to the extension you wish to activate.

5.

A pop-up screen displays the activation code for the extension.

6.

Connect your ATA to a power source and a router or modem with an Internet connection.

7.

Make sure a phone is connected to the

Phone 1

plug

on the Linksys ATA that you want

to activate.

–

If your fax machine has a telephone, lift the handset and follow the voice instructions

to enter the activation code and activate your port

–

If your fax machine does not have a built-in telephone, temporarily connect any analog

telephone to activate this port, then plug your fax machine back in for fax service.

8.

Follow the instructions on page 2 to install your ATA.

Assistance

If you would prefer to set

up your service over the

phone at no extra charge:

Call

1.866.208.9369

to

schedule an appointment.