Linksys SPA8000-G1 Quick Installation Guide
Linksys SPA8000-G1 - Ip Telephony Gateway Manual
 |
UPC - 745883580880
View all Linksys SPA8000-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Linksys SPA8000-G1 manual content summary:
- Linksys SPA8000-G1 | Quick Installation Guide - Page 1
Package Contents • 8-Port Telephony Gateway • RJ-45 Ethernet Cable • Power Supply • Power Cord • Quick Installation 8-Port Telephony Gateway Model: SPA8000 QUICK INSTALLATION - Linksys SPA8000-G1 | Quick Installation Guide - Page 2
- Linksys SPA8000-G1 | Quick Installation Guide - Page 3
Table of Contents Connect 4 Configuration 6 Interactive Voice Response Menu 8 Regulatory Information 12 WEEE Information 16 Warranty 22 Contact Information 23 - Linksys SPA8000-G1 | Quick Installation Guide - Page 4
: If the Gateway is pre-configured by your ITSP, then you do not need to change any of the default voice settings. Refer to the documentation supplied by your service provider for more information. A. Power off your network devices, including your modem and PC. B. If you have an RJ-21 connector - Linksys SPA8000-G1 | Quick Installation Guide - Page 5
one end of a different Ethernet network cable to the AUX port of the Gateway. Connect the other end to the Ethernet port of your PC. G. Power on the cable/DSL modem. H. Connect the included power adapter to the Gateway's power port, and then plug the power adapter into an electrical outlet - Linksys SPA8000-G1 | Quick Installation Guide - Page 6
.168.0.1 is the default local IP address of the Gateway). Then press Enter. C. If your Internet Telephony Service Provider (ITSP) did not supply a password, you will not see a login screen. Proceed to step D. If your ITSP supplied a password, you will see a login screen. In the User Name field - Linksys SPA8000-G1 | Quick Installation Guide - Page 7
user name in the PPPoE Login Name field, and enter the password in the PPPoE Login Password field. 3. Click Submit All Changes PPPoE If the Gateway is pre-configured by your ITSP, then you do not need to change any of the default voice settings. Refer to the documentation supplied by your service - Linksys SPA8000-G1 | Quick Installation Guide - Page 8
Response Menu to configure the Gateway's network settings. You will use the telephone's keypad to enter your commands and select choices, and the Gateway will use voice responses. To access the Interactive Voice Response Menu: A. Use a telephone connected to the PHONE port of the Gateway. (You can - Linksys SPA8000-G1 | Quick Installation Guide - Page 9
to the documentation supplied by your Internet Service Provider (ISP) Hear the IP address assigned to the Gateway's Internet (external) interface. Set Static IP 111 Address Check Network 120 Mask (or Subnet Mask) Set Network (or 121 Subnet) Mask Check Gateway 130 IP Address First, set the - Linksys SPA8000-G1 | Quick Installation Guide - Page 10
Action Command Choices Description Set Gateway IP 131 Address Check MAC 140 Address Check Firmware 150 Version Check Primary 160 DNS Server IP Address Set Primary DNS 161 Server IP Address Check Internet 170 Web Server Port Check AUX port 210 IP Address First, set the Internet Connection - Linksys SPA8000-G1 | Quick Installation Guide - Page 11
hear, "Option successful." Hang up the phone. The Gateway will reboot and all user-configurable settings will be reset to their factory default settings. †Follow these instructions to enter the password. A, B, C, a, b, or c - press 2. D, E, F, d, e, or f - press 3. G, H, I, g, h, or i - press - Linksys SPA8000-G1 | Quick Installation Guide - Page 12
specifications for a Class B digital device the user RJ network should be made by using the standard modular telephone jack. The REN is useful to determine the quantity of devices that may be connected to the telephone line and still have all of those devices ring when your telephone number is called - Linksys SPA8000-G1 | Quick Installation Guide - Page 13
support provider for repair and warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you remove the equipment from the network until the problem is resolved. This equipment cannot be used on telephone company provided coin service - Linksys SPA8000-G1 | Quick Installation Guide - Page 14
near a swimming pool. • Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Industry Canada Statement This device complies with Industry Canada ICES-003 rule. Operation is subject to the following two conditions: 1 . This - Linksys SPA8000-G1 | Quick Installation Guide - Page 15
15 - Linksys SPA8000-G1 | Quick Installation Guide - Page 16
contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Bulgarian 2002/96/ - Linksys SPA8000-G1 | Quick Installation Guide - Page 17
Dansk (Danish) - Miljøinformation for kunder i EU EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. - Linksys SPA8000-G1 | Quick Installation Guide - Page 18
Pour plus d'informations sur le mode d'élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l'endroit où vous avez acheté le produit. Italiano (Italian) - Informazioni relative all'ambiente per i clienti residenti - Linksys SPA8000-G1 | Quick Installation Guide - Page 19
negatív hatások megelõzésében. Ha elavult berendezéseinek felszámolásához további részletes információra van szüksége, kérjük, lépjen kapcsolatba a helyi hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal üzlettel, ahol a terméket vásárolta. Nederlands (Dutch) - Milieu-informatie voor - Linksys SPA8000-G1 | Quick Installation Guide - Page 20
Norsk (Norwegian) - Miljøinformasjon for kunder i EU EU-direktiv 2002/96/EF krever at utstyr med følgende symbol avbildet på produktet og/eller pakningen, ikke må kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal håndteres atskilt fra ordinær avfallsinnsamling for - Linksys SPA8000-G1 | Quick Installation Guide - Page 21
konsekvenser för miljön och personhälsa. För mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken där du köpte produkten. 21 - Linksys SPA8000-G1 | Quick Installation Guide - Page 22
at its option to repair or replace the Product or refund Your purchase price less any rebates. This limited warranty extends only to the original purchaser. If the Product proves defective during the Warranty Period call Your Internet telephone service provider Technical Support in order to obtain - Linksys SPA8000-G1 | Quick Installation Guide - Page 23
Contact Information For additional information or troubleshooting help, contact your Service Provider. Website Inside the United States: www.linksys.com Outside the United States: www.linksys.com/international Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its - Linksys SPA8000-G1 | Quick Installation Guide - Page 24
www.linksys.com
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
QUICK INSTALLATION
8-Port Telephony
Gateway
Model:
SPA8000
Package Contents
8-Port Telephony Gateway
RJ-45 Ethernet Cable
Power Supply
Power Cord
Quick Installation
•
•
•
•
•