Linksys WRT54GR User Guide

Linksys WRT54GR - Wireless-G Broadband Router Manual

Get Linksys WRT54GR - Wireless-G Broadband Router PDF manuals and user guides
UPC - 745883566327
View all Linksys WRT54GR manuals
Add to My Manuals
Save this manual to your list of manuals

Linksys WRT54GR manual content summary:

  • Linksys WRT54GR | User Guide - Page 1
    ® A Division of Cisco Systems, Inc. 2.4GHz 802.11g WIRELESS Wireless-G Broadband Router with RangeBooster Model No. WRT54GR User Guide
  • Linksys WRT54GR | User Guide - Page 2
    Look for the following items when reading this User Guide: This checkmark means there is a note of interest and is something you should pay special attention to while using the Wireless-G Broadband Router with RangeBooster. This exclamation point means there is a caution or warning and is something
  • Linksys WRT54GR | User Guide - Page 3
    the Wireless-G Broadband Router with RangeBooster 10 Overview 10 The Setup Tab - Basic Setup 11 The Setup Tab - DDNS 15 The Setup Tab - MAC Address Clone 16 The Setup Tab - Advanced Routing 17 The Wireless Tab - Basic Wireless Settings 18 The Wireless Tab - Wireless Security 19
  • Linksys WRT54GR | User Guide - Page 4
    Wireless-G Broadband Router with RangeBooster The Administration Tab - Factory Defaults 35 The Administration Tab - Firmware Upgrade 35 The Status Tab - Router 36 The Status Tab - Local Network 37 The Status Tab - Wireless Network 37 Appendix A: Troubleshooting 38 Common Problems and
  • Linksys WRT54GR | User Guide - Page 5
    Wireless-G Broadband Router with RangeBooster List of Figures Figure 3-1: The Router's Back Panel 6 Figure 3-2: The Router's Front Panel 7 Figure 4-1: Connecting Your Internet Connection 8 Figure 4-2: Connecting Your Network Devices 9 Figure 4-3: Connecting the Power 9 Figure 5-1:
  • Linksys WRT54GR | User Guide - Page 6
    - Factory Defaults 35 Figure 5-46: Administration Tab - Firmware Upgrade 35 Figure 5-47: Status Tab - Router 36 Figure 5-48: Status Tab - Router with PPPoE IP Connection 36 Figure 5-49: Status Tab - Local Network 37 Figure 5-50: DHCP Clients Table 37 Figure 5-51: Status Tab - Wireless
  • Linksys WRT54GR | User Guide - Page 7
    . Linksys recommends using the Setup CD-ROM for first-time installation of the Router. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then use the instructions in this Guide to help you connect the Wireless-G Broadband Router with RangeBooster, set it up, and configure it to bridge
  • Linksys WRT54GR | User Guide - Page 8
    on the Wireless-G Broadband Router with RangeBooster. • Appendix A: Troubleshooting This appendix describes some problems and solutions, as well as frequently asked questions, regarding installation and use of the Wireless-G Broadband Router with RangeBooster. • Appendix B: Wireless Security This
  • Linksys WRT54GR | User Guide - Page 9
    Wireless-G Broadband Router with RangeBooster • Appendix G: Specifications This appendix provides the technical specifications for the Router. • Appendix H: Warranty Information This appendix supplies the warranty information for the Router. • Appendix I: Regulatory Information This appendix
  • Linksys WRT54GR | User Guide - Page 10
    should be set up in Infrastructure mode. The basis of Infrastructure mode centers around a wireless router or an access point, such as the Wireless-G Broadband Router with RangeBooster, which serves as the main point of communications in a wireless network. The Router transmits data to PCs equipped
  • Linksys WRT54GR | User Guide - Page 11
    ). With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at www.linksys.com for more information about products that work with the Wireless-G Broadband Router with RangeBooster. Chapter 2: Planning Your Wireless Network 5 Network Layout
  • Linksys WRT54GR | User Guide - Page 12
    : Resetting the Router will erase all of your settings (Internet connection, wireless security, and other settings) and replace them with the factory defaults. Do not reset the Router if you want to retain these settings. Chapter 3: Getting to Know the Wireless-G Broadband Router with RangeBooster
  • Linksys WRT54GR | User Guide - Page 13
    a successful wireless connection. If the LED is flashing, the Router is actively sending or receiving data over the network. Power Green. The Power LED lights up and will stay on while the Router is powered on. Chapter 3: Getting to Know the Wireless-G Broadband Router with RangeBooster 7 The
  • Linksys WRT54GR | User Guide - Page 14
    Wireless-G Broadband Router with RangeBooster Chapter 4: Connecting the Wireless-G Broadband Router with RangeBooster Hardware Installation for Connection to Your Broadband Modem 1. Power down your network devices. 2. Locate an optimum location for the Router. The best place for the Router is
  • Linksys WRT54GR | User Guide - Page 15
    use the power adapter that is supplied with the Router. Use of a different power adapter could damage the Router. Figure 4-3: Connecting the Power Now that the hardware installation is complete, proceed to "Chapter 5: Setting up the Wireless-G Broadband Router with RangeBooster," for directions
  • Linksys WRT54GR | User Guide - Page 16
    tabs: Setup, Wireless, Security, Access Restrictions, Applications & Gaming, Administration, and Status. Additional tabs will be available after you click one of the main tabs. To access the Web-based Utility, launch Internet Explorer or Netscape Navigator, and enter the Router's default IP address
  • Linksys WRT54GR | User Guide - Page 17
    Name System) Server IP Address. Figure 5-3: DHCP Connection Type Figure 5-4: Static IP Connection Type Static IP address: a fixed address assigned to a computer or device connected to a network. Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 11 The Setup Tab - Basic
  • Linksys WRT54GR | User Guide - Page 18
    Period field, you specify how often you want the Router to check the Internet connection. The default Redial Period is 30 seconds. Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster The Setup Tab - Basic Setup Figure 5-5: PPPoE Connection Type Figure 5-6: PPTP Connection Type
  • Linksys WRT54GR | User Guide - Page 19
    Wireless-G Broadband Router with RangeBooster • HeartBeat Signal. HeartBeat Signal (HBS) is a service that applies to connections in Australia only. If your ISP is Telstra, then select HeartBeat Signal. User Name and Password. Enter the User Name and Password provided by your ISP. Server IP Address.
  • Linksys WRT54GR | User Guide - Page 20
    Wireless-G Broadband Router with RangeBooster DHCP Server. DHCP is enabled by factory default. If you already have a DHCP server on your network, or you don't want a DHCP server, then click the Disable radio button (no other DHCP features will be available). Start IP Address. Enter a value for the
  • Linksys WRT54GR | User Guide - Page 21
    Router's current Internet IP Address is displayed here. Because it is dynamic, this will change. Status. This displays the status of the DDNS connection. Connect button. Click this button to connect to the service. Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster The Setup
  • Linksys WRT54GR | User Guide - Page 22
    Wireless-G Broadband Router with RangeBooster The Setup Tab - MAC Address Clone A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC
  • Linksys WRT54GR | User Guide - Page 23
    Wireless-G Broadband Router with RangeBooster The Setup Tab - Advanced Routing This tab is used to set up the Router's advanced functions. Operating Mode characters. Destination LAN IP. The Destination LAN IP is the address of the remote Close button to close the window and return to the Advanced
  • Linksys WRT54GR | User Guide - Page 24
    Wireless-G Broadband Router with RangeBooster The Wireless Tab - Basic Wireless Settings The basic settings for wireless networking are set on this screen. Wireless. Select Enabled to enable wireless capabilities or Disabled to disable wireless. Network Mode. From this drop-down menu, you can select
  • Linksys WRT54GR | User Guide - Page 25
    Wireless-G Broadband Router with RangeBooster The Wireless Tab - Wireless Security The Wireless Security settings configure the security of your wireless network. There are four wireless security mode options supported by the Router: WEP, WPA Personal, PSK2, PSK2-Mixed, WPA-Enterprise, PSK2 + RADIUS
  • Linksys WRT54GR | User Guide - Page 26
    , which instructs the Router how often it should change the encryption keys. Figure 5-23: Wireless Tab - Wireless Security (RPSK2Mixed) Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster The Wireless Tab - Wireless Security Figure 5-24: Wireless Tab - Wireless Security (WPA
  • Linksys WRT54GR | User Guide - Page 27
    Wireless-G Broadband Router with RangeBooster PSK2 + RADIUS. This option features a PSK2 used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) AES is the type of encryption method used. Enter the RADIUS server's IP address and port
  • Linksys WRT54GR | User Guide - Page 28
    Wireless-G Broadband Router with RangeBooster The Wireless Tab - Wireless MAC Filter Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network's radius. Wireless MAC Filter To filter wireless users by MAC Address, either permitting or
  • Linksys WRT54GR | User Guide - Page 29
    reach the wireless client, such as a PC or access point, that is farthest from the Router. Then select the appropriate level, Full, Half, Quarter, Eighth, or Min, from the drop-down menu. The default setting is Full. Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 23 The
  • Linksys WRT54GR | User Guide - Page 30
    Wireless-G Broadband Router with RangeBooster CTS Protection Mode. CTS (Clear-To-Send) Protection Mode's default setting is Auto. The Router will automatically use CTS Protection Mode when your Wireless-G products are experiencing severe problems and are not able to transmit to the Router in an
  • Linksys WRT54GR | User Guide - Page 31
    data stored on your computer and used by Internet sites when you interact with them. To enable cookie filtering, click the checkbox. Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster The Security Tab - Firewall Figure 5-30: Security Tab - Firewall 25
  • Linksys WRT54GR | User Guide - Page 32
    the Cancel Changes button to cancel your changes. To return to the Internet Access Policy tab, click the Close button. Figure 5-32: Access Restrictions Tab - Internet Access Policy Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 26 The Security Tab - VPN Passthrough
  • Linksys WRT54GR | User Guide - Page 33
    the policy. The Internet Access PCs List screen will appear. You can select a PC by MAC Address or IP Address. You can also enter a range of IP Addresses if you want this of PCs Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 27 The Access Restrictions Tab - Internet
  • Linksys WRT54GR | User Guide - Page 34
    Wireless-G Broadband Router with RangeBooster The Applications and Gaming Tab - Single Port Forwarding Single Port Forwarding The Single Port Forwarding screen provides options for customization of port services for common applications. When users send this type of request to your network via the
  • Linksys WRT54GR | User Guide - Page 35
    Wireless-G Broadband Router with RangeBooster The Applications and Gaming Tab - Port Range Forwarding The Applications and Gaming Tab allows you to set up public services either TCP or UDP, or Both. To IP Address. For each application, enter the IP Address of the PC running the specific application.
  • Linksys WRT54GR | User Guide - Page 36
    Wireless-G Broadband Router with RangeBooster The Applications & Gaming Tab - Port Range Triggering The Port Triggering screen allows the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that when the
  • Linksys WRT54GR | User Guide - Page 37
    Wireless-G Broadband Router with RangeBooster The Administration Tab - Management This section of the Administration tab allows the network's administrator to manage specific Router functions for access and security. Management Router Access Router Password and Re-enter to Confirm. You can change
  • Linksys WRT54GR | User Guide - Page 38
    Wireless-G Broadband Router with RangeBooster Allow Remote IP Address. If you want to be able to access the Router from any external IP address, select Any IP Address. If you want to specify an external IP address or range of IP addresses, then select the second option and complete the fields
  • Linksys WRT54GR | User Guide - Page 39
    Wireless-G Broadband Router with RangeBooster The Administration Tab - Log The Router can keep logs of all traffic for your Internet connection. Log To disable the Log function, keep the default setting, Disabled. To monitor traffic between the network and the Internet, select Enabled. Logviewer IP
  • Linksys WRT54GR | User Guide - Page 40
    Wireless-G Broadband Router with RangeBooster The Administration Tab - Diagnostics The Ping test allows you to check the status of your Internet connection. Ping Test. The Ping test will check the status of a connection. Enter the address of the PC whose connection you wish to test, the packet size,
  • Linksys WRT54GR | User Guide - Page 41
    file, click this button, and follow the on-screen instructions. Help information is shown on the right-hand side of the screen. Figure 5-46: Administration Tab - Firmware Upgrade Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 35 The Administration Tab - Factory Defaults
  • Linksys WRT54GR | User Guide - Page 42
    replace the current IP address-of the device connected to the Router's Internet port-with a new IP address. Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster The Status Tab - Router Figure 5-47: Status Tab - Router Figure 5-48: Status Tab - Router with PPPoE IP Connection 36
  • Linksys WRT54GR | User Guide - Page 43
    Wireless-G Broadband Router with RangeBooster Click the Refresh button to update the on-screen information. Help information is shown on the right-hand side of the screen. The Status Tab - Local Network The Local Network screen on the Status Tab displays the status of your network. Local MAC Address
  • Linksys WRT54GR | User Guide - Page 44
    Wireless-G Broadband Router with RangeBooster Appendix A: Troubleshooting This appendix consists of two parts: "Common Problems and Solutions" and "Frequently Asked Questions." Provided are possible solutions to problems that may occur during the installation and operation of the Router. Read the
  • Linksys WRT54GR | User Guide - Page 45
    Wireless-G Broadband Router with RangeBooster • For Windows 2000: 1. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections. 2. Right-click the Local Area Connection that is associated with the
  • Linksys WRT54GR | User Guide - Page 46
    cause of the problem. 4. I am not getting an IP address on the Internet with my Internet connection. • Refer to "Problem #3, I want IP Address, or PPPoE (commonly used by DSL consumers). Please refer to the Setup section of "Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster
  • Linksys WRT54GR | User Guide - Page 47
    Wireless-G Broadband Router with RangeBooster 5. I am not able to access the Setup page of the Router's web-based utility. • Refer to "Problem #3, I want to test my Internet connection" to verify that your computer is properly connected to the Router. • Refer to "Appendix E: Finding the MAC Address
  • Linksys WRT54GR | User Guide - Page 48
    Wireless-G Broadband Router with RangeBooster 7. I need to set up online game hosting or use other Internet applications. If you want to play online games or use Internet applications, most will work 1. Access the Router's web interface by going to http://192.168.1.1 or the IP address of the Router.
  • Linksys WRT54GR | User Guide - Page 49
    . Reset the Router to factory default by pressing the Reset button for 10 seconds and then releasing it. If you are still getting prompted for a password when saving settings, then perform the following steps: 1. Access the Router's web-based utility by going to http://192.168.1.1 or the IP address
  • Linksys WRT54GR | User Guide - Page 50
    Wireless-G Broadband Router with RangeBooster 11. To start over, I need to set the Router to factory default. Hold the Reset button for 10 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the
  • Linksys WRT54GR | User Guide - Page 51
    Wireless-G Broadband Router with RangeBooster 15. I can't access my e-mail, web or I am getting corrupted data from the Internet. The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500. For most DSL users, it is strongly recommended to use MTU 1492. •
  • Linksys WRT54GR | User Guide - Page 52
    screen, click Enter Wireless Settings Manually and continue to follow the onscreen instructions. For more information, refer to "Chapter 5: Setting up the Wireless-G Broadband Router with RangeBooster." How do I set up additional devices using SecureEasySetup? Repeat the SecureEasySetup process
  • Linksys WRT54GR | User Guide - Page 53
    simultaneously with just one public IP address? It depends on which network game or what kind of game server you are using. For example, Unreal Tournament supports multi-login with one public IP. How do I get Half-Life: Team Fortress to work with the Router? The default client port for Half-Life
  • Linksys WRT54GR | User Guide - Page 54
    Wireless-G Broadband Router with RangeBooster the same time, even if on the same LAN (not a problem with 1.0.1.3). As far as hosting games, the HL server does not need to be in the DMZ. Just forward port 27015 to the local IP address of the server computer. How can I block corrupted FTP downloads?
  • Linksys WRT54GR | User Guide - Page 55
    Wireless-G Broadband Router with RangeBooster What is DMZ Hosting? Demilitarized Zone (DMZ) allows one IP address (computer) to be exposed to the Internet. Some applications require multiple TCP/IP ports to be open. It is recommended that you set your computer with a static IP if you want to use DMZ
  • Linksys WRT54GR | User Guide - Page 56
    Wireless-G Broadband Router with RangeBooster What is the IEEE 802.11b standard? It is one of the IEEE standards for wireless networks. The 802.11b standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11b standard
  • Linksys WRT54GR | User Guide - Page 57
    Wireless-G Broadband Router with RangeBooster maintain contact with the wireless network even when not actually transmitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links access points and nodes. In such a system, the user's end node undertakes
  • Linksys WRT54GR | User Guide - Page 58
    Wireless-G Broadband Router with RangeBooster What is WEP? WEP is Wired Equivalent Privacy, a data privacy mechanism based on a 64-bit or 128-bit shared key algorithm, as described in the IEEE 802.11 standard. What is a MAC Address? The Media Access Control (MAC) address is a unique number assigned
  • Linksys WRT54GR | User Guide - Page 59
    Wireless-G Broadband Router with RangeBooster Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for
  • Linksys WRT54GR | User Guide - Page 60
    Wireless-G Broadband Router with RangeBooster SSID. There are several things to keep in mind about the SSID: 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it
  • Linksys WRT54GR | User Guide - Page 61
    Wireless-G Broadband Router with RangeBooster WPA Personal. Select the type of encryption, TKIP or AES, enter a Passphrase (pre-shared key) of 8-64 characters, and enter a Key Renewal period time between 0 and 99,999 seconds, which instructs the Router or other device how often it should change the
  • Linksys WRT54GR | User Guide - Page 62
    Wireless-G Broadband Router with RangeBooster Appendix C: Upgrading Firmware The Router's firmware is upgraded through the Web-based Utility's Administration tab. Follow these instructions: 1. Download the firmware from Linksys's website at www.linksys.com. 2. Extract the firmware file on your
  • Linksys WRT54GR | User Guide - Page 63
    Wireless-G Broadband Router with RangeBooster Appendix D: Windows Help Almost Linksys wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help
  • Linksys WRT54GR | User Guide - Page 64
    Wireless-G Broadband Router with RangeBooster Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer's Ethernet adapter so you can use the MAC filtering and/or MAC address cloning feature of the Router. You
  • Linksys WRT54GR | User Guide - Page 65
    more information, refer to Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster. Figure E-4: MAC Address Filter List Figure E-5: Wireless Client List Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter For the Router's Web-based Utility Figure E-6: MAC
  • Linksys WRT54GR | User Guide - Page 66
    Wireless-G Broadband Router with RangeBooster Appendix D: Glossary This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Access Point IP address. Default Gateway
  • Linksys WRT54GR | User Guide - Page 67
    Wireless-G Broadband Router with RangeBooster DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be "seen" from the Internet. DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses. Domain
  • Linksys WRT54GR | User Guide - Page 68
    Wireless-G Broadband Router with RangeBooster IP Address - The address used to identify a computer or device on a network. IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. IPSec (Internet Protocol Security) - A VPN protocol used to implement
  • Linksys WRT54GR | User Guide - Page 69
    Wireless-G Broadband Router with RangeBooster RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection. Router - A networking device that connects multiple
  • Linksys WRT54GR | User Guide - Page 70
    Broadband Router with RangeBooster TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware
  • Linksys WRT54GR | User Guide - Page 71
    Wireless-G Broadband Router with RangeBooster Appendix G: Specifications Model Standards Channels Ports Buttons LEDs Peak Gain of the Antenna Transmitted Power Receive Sensitivity Power Security Features Dimensions (W x H x D) Unit Weight WRT54GR IEEE 802.3, IEEE 802.3u, IEEE 802.11g, IEEE 802.11b
  • Linksys WRT54GR | User Guide - Page 72
    Wireless-G Broadband Router with RangeBooster Power External, 12V DC, 500mA Certifications FCC, Wi-Fi Operating Temp. 0ºC to 40ºC (32ºF to 104ºF) Storage Temp. -20ºC to 70ºC (-4ºF to 158ºF) Operating Humidity 10%
  • Linksys WRT54GR | User Guide - Page 73
    Wireless-G Broadband Router with RangeBooster Appendix H: Warranty Information LIMITED WARRANTY Linksys warrants to You that, for a period of three years (the "Warranty Period"), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive
  • Linksys WRT54GR | User Guide - Page 74
    Wireless-G Broadband Router with RangeBooster Appendix G: Regulatory Information FCC Statement This product has been tested and a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause
  • Linksys WRT54GR | User Guide - Page 75
    Wireless-G Broadband Router with RangeBooster User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
  • Linksys WRT54GR | User Guide - Page 76
    Wireless-G Broadband Router with RangeBooster Appendix G: Regulatory Information 43
  • Linksys WRT54GR | User Guide - Page 77
    Wireless-G Broadband Router with RangeBooster Appendix G: Regulatory Information 44
  • Linksys WRT54GR | User Guide - Page 78
    Wireless-G Broadband Router with RangeBooster Appendix G: Regulatory Information 45
  • Linksys WRT54GR | User Guide - Page 79
    Wireless-G Broadband Router with RangeBooster For more information, visit www.linksys.com. Appendix G: Regulatory Information 46
  • Linksys WRT54GR | User Guide - Page 80
    Wireless-G Broadband Router with RangeBooster Appendix J: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: Can't find information about a product you want to buy on the web? Do you want to know more about
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
A Division of Cisco Systems, Inc.
®
Model No.
Broadband Router
Wireless-
G
WRT54GR
User Guide
WIRELESS
GHz
2.4
802.11g
with RangeBooster