Linksys WRT54GS User Guide - Page 23

Chapter 3 Administration > Firmware Upgrade The Administration > Firmware Upgrade screen allows you to upgrade the Router's firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use. Advanced Configuration Restore Configuration Please select a file to restore Click the Browse button and select the configuration file. Then click the Restore button. Status > Router The Status > Router screen displays the Router's current status. Administration > Firmware Upgrade Before upgrading the firmware, download the Router's firmware upgrade file from the Linksys website, www. linksys.com. Then extract the file. Upgrade Firmware Please select a file to upgrade Click the Browse button and select the extracted firmware upgrade file. Then click the Upgrade button and follow the on-screen instructions. Administration > Config Management This screen is used to back up or restore the Router's configuration file. Administration > Config Management Backup Configuration To back up the Router's configuration file, click the Backup button. Then follow the on-screen instructions. Wireless-G Broadband Router with SpeedBooster Administration > Factory Defaults Router Information Firmware Version This is the Router's current firmware. Current Time This shows the time, as you set on the Setup tab. MAC Address This is the Router's MAC Address, as seen by your ISP. Router Name This is the specific name for the Router, which you set on the Setup tab. Host Name If required by your ISP, this would have been entered on the Setup tab. Domain Name If required by your ISP, this would have been entered on the Setup tab. Internet Configuration Type This section shows the current network information stored in the Router. The information varies depending on the Internet connection type selected on the Setup > Basic Setup screen. Click the Refresh button to update the on-screen information. 19