Lowrance HDS-9 Gen2 Touch HDS Gen2 Touch 2.5 software release addendum - EN
Lowrance HDS-9 Gen2 Touch Manual
 |
View all Lowrance HDS-9 Gen2 Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Lowrance HDS-9 Gen2 Touch manual content summary:
- Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 1
2.0 & 2.5 addendum This addendum documents new features included in the HDS Gen2 Touch 2.0 and 2.5 software upgrades. These features are not described in the HDS Gen2 Touch Operation manual. HDS Gen2 Touch 2.0 software update Converting files in high resolution You can create standard resolution or - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 2
to insert a compatible chart card from Lowrance, Navionics, Jeppesen or other provider into , if required. New Navionics features The 2.0 software update features several new Navionics features that allow the - Increases the size of cartography on the screen, as though user was using a magnifying - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 3
history will be averaged. As a result, higher damping levels cause a delayed response to changes in the data. PDF reader Use the PDF viewer to read manuals and other PDF files on the HDS display. The manuals can be read from an inserted SD card or from the unit's internal memory. | 3 - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 4
the satellite based augmentation system (SBAS), which can increase accuracy of a GPS fix to within approximately 1m. WAAS covers North America, MSAS covers East Asia (primarily JAPAN), and EGNOS covers Europe. Position Update Position update rate may be adjusted to suit your vessel and to minimize - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 5
the same network and you only want to receive data from one of the heading sensors. GNSS Configuration The GPS and GLONASS options may be enabled simultaneously, or individually. Generally, GPS offers the highest accuracy, but in certain circumstances a better fix may be achieved with both or only - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 6
in its permanent location, follow the on-screen instructions to calibrate the compass. GoFree™ wireless With a WIFI-1 unit connected to an HDS unit you can use a wireless device to view or remotely control the HDS display. Displaying HDS data on a wireless device requires a corresponding app - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 7
Older versions of the Android operating system do not support display unit autodiscovery. If no units appear on the Lowrance GoFree Controller screen, follow the onscreen instructions. The first time you request control from the wireless device, the HDS unit will prompt you to confirm remote control - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 8
immediately established. ¼¼ Note: If control is rejected the wireless device will mirror the HDS screen, but no operation will be allowed from the remote device. All connected wireless devices will be listed in the HDS dialog, and you can change the access level for all connected devices. Operating - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 9
HDS Gen2 Touch 2.5 software The HDS RTM 2.5 software update enables support for the SonarHub sonar module, SpotlightScan sonar and Fusion-Link. SonarHub You can use the SonarHub to view data from CHIRP, broadband and StructureScan HD transducers. ¼¼ Note: When the SonarHub is in CHIRP mode, you - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 10
for DownScan imaging or as a conventional broadband transducer. ¼¼ Note: SpotlightScan is compatible with HDS Gen2 Touch units and HDS Gen2 non-touch units. HDS Gen2 non-touch units require a SonarHub for compatibility with the SpotlightScan transducer. Twin scanning beams SpotlightScan comes with - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 11
motor type 6. Select Calibrate 7. Select OK on the confirmation dialog Displaying SpotlightScan view SpotlightScan images are viewed on the Structure page. You can set up combo pages to view SpotlightScan images, broadband sonar and DownScan images at the same time. HDS Gen2 Touch | 11 - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 12
can be controlled by a HDS unit. The integration is currently limited and does not support the following features: • Multiple FUSION-Link device connectivity • Sirius weather controls via FUSION-Link devices ¼¼ Note: Refer to your FUSION manual for instructions covering the installation of a FUSION - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 13
VHF setup 1. Select VHF as the Source 2. Tap Options on the audio menu 3. Tap Tuner region 4. Select your region VHF operation VHF control Save as favorite Fav +/Fav Squelch Scan mode Tune +/Tune - Adds current channel to favorite's list Toggles through favorite's list Controls squelch level - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 14
can view DVD video on HDS Gen2 Touch 9" and 12" units with a HDS Gen2 Video Adapter cable (000-11010-001), sold separately. You cannot view DVD video on HDS Gen2 Touch 7" units. Viewing DVD video 1. Insert a DVD into the FUSION-Link device 2. Select DVD as the source on the HDS audio menu 3. Display - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 15
Connect the desired device to the auxiliary input on the FUSION radio 2. Tap Options on HDS audio menu 3. Tap Detach from AUX Repeat Steps 2-3 to Attach Sirius. Mixer Your unit supports FUSION-Link devices with up to four audio zones that can be controlled independently. Mixer Zone 1, 2, 3, 4 All - Lowrance HDS-9 Gen2 Touch | HDS Gen2 Touch 2.5 software release addendum - EN - Page 16
lowrance.com *988-10668-001*
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
| 1
This addendum documents new features included in the HDS
Gen2 Touch 2.0 and 2.5 software upgrades. These features are not
described in the HDS Gen2 Touch Operation manual.
HDS Gen2 Touch 2.0 software update
Converting files in high resolution
You can create standard resolution or high resolution StructureMap
.smf files. High resolution .smf files capture more detail, but take
longer to convert and are larger than standard resolution .smf files.
Check the High Resolution checkbox to convert files in high detail.
Networking
Sonar and Structure
You can now view and control traditional sonar and structure sonar
independent of one another on an Ethernet network. That allows
you to view traditional sonar from a trolling motor transducer, while
viewing StructureScan data from a transducer mounted on the
transom.
Structure history and standby mode
The StructureScan transducer will continue to record structure
history when the unit is in Standby mode. To turn off the transducer,
enable the Stop sonar command on the Structure menu.
HDS Gen2 Touch 2.0 & 2.5 addendum