Lowrance LGC-4000 - Baja Installation Manual
Lowrance LGC-4000 - Baja Manual
View all Lowrance LGC-4000 - Baja manuals
Add to My Manuals
Save this manual to your list of manuals |
Lowrance LGC-4000 - Baja manual content summary:
- Lowrance LGC-4000 - Baja | Installation Manual - Page 1
the installation of the LGC-4000 or LGC-Baja GPS modules and how to connect them to a NMEA 2000 network. ! CAUTION: You should read all of the installation instructions before proceeding. Decide where to install all components before drilling holes in your vessel or vehicle. All Lowrance NMEA - Lowrance LGC-4000 - Baja | Installation Manual - Page 2
31 (3 mm) drill bit for the screw holes. Mounting the LGC Module The GPS module can be mounted on any flat surface as long as there is room behind the mounting surface for the screws. The optional pole mount adapter lets you mount the antenna on a pole or swivel mount that uses standard marine 1"-14 - Lowrance LGC-4000 - Baja | Installation Manual - Page 3
side of the pole or you can pass it through the pole mount adapter and run the cable inside the pole. The 1"-14 threads on the pole mount adapter fit a standard marine antenna mounting pole. Powering Your GPS Module Your LGC GPS module is powered by the NMEA 2000 network, so your network must be - Lowrance LGC-4000 - Baja | Installation Manual - Page 4
Notes 4 - Lowrance LGC-4000 - Baja | Installation Manual - Page 5
Notes 5 - Lowrance LGC-4000 - Baja | Installation Manual - Page 6
Notes 6 - Lowrance LGC-4000 - Baja | Installation Manual - Page 7
. This warranty does NOT apply in the following circumstances: (1) when the product has been serviced or repaired by anyone other than us; (2) when the product has been connected, installed, combined, altered, adjusted, or handled in a manner other than according to the instructions furnished with - Lowrance LGC-4000 - Baja | Installation Manual - Page 8
to obtain service in Canada Contact the Factory Customer Service Department. Call instructions in paragraph number 1 below. Accessory Ordering Information LEI Extras™, Inc. is the accessory source for sonar and GPS products manufactured by Lowrance Electronics and Eagle Electronics. To order Lowrance
1
Pub. 988-0154-65C
LGC-4000 & LGC-Baja
GPS Modules
Installation Instructions
This document covers the installation of the LGC-4000 or LGC-Baja GPS
modules and how to connect them to a NMEA 2000 network.
All Lowrance NMEA 2000 capable devices are either NMEA 2000 certified
or certification is pending. See our web site for the latest product status
information.
LGC-
4000 Module, bottom view (left) and top view (right).
The LGC module consists of a male threaded cable connector and the GPS
module. The GPS module contains a 16-parallel channel GPS+WAAS receiver.
The cable length from the connector to the GPS module is 18 inches (45.7 cm.
The module packs with a 15’ extention cable, a T connector and parts needed to
mount the module on a flat surface or on a pole.
CAUTION:
You should read all of the installation
instructions before proceeding. Decide where to install all
components before drilling holes in your vessel or vehicle
.
!