MSI K9N2 SLI PLATINUM User Guide - Page 28
Fan Power Connectors: CPUFAN1, SYSFAN1/ 2/ 3/ 4, SPDIF-Out Connector: SPDOUT1
UPC - 816909045307
View all MSI K9N2 SLI PLATINUM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
MS-7374 Mainboard Fan Power Connectors: CPUFAN1, SYSFAN1/ 2/ 3/ 4 The fan power connectors support system cooling fan with +12V. W hen connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. GND +12V NC CONTROL SENSOR +12V GND CPUFAN1 GND +12V NC or Sensor SYSFAN1/2/3 SYSFAN4 Important 1. Please refer to the recommended CPU fans at processor's official website or consult the vendors for proper CPU cooling fan. 2. CPUFAN1 supports fan control. You can install Dual Core Center utility that will automatically control the CPU fan speed according to the actual CPU temperature. 3. Fan/heatsink with 3 or 4 pins are both available for CPUFAN1. SPDIF-Out Connector: SPDOUT1 (optional, for HDMI graphics card only) This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission to the HDMI graphics card. SPDIF GND SPDOUT1 2-14