MSI K9N2 SLI PLATINUM User Guide - Page 90
Channel, Adapter
UPC - 816909045307
View all MSI K9N2 SLI PLATINUM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
MS-7374 Mainboard Understanding the "Define a New Array" Window Use the Define a New Array window to • Select the RAID Mode • Set up the Striping Block • Specify which disks to use for the RAID Array The SATA ports are called channels and they are associated with adapters. The first digit in the Location field defines the adapter that the port is associated with. The 2nd digit defines the channel. 0 . 1 Channel Adapter In the example above, 0.1 means the hard drive is attached to Adapter 0, Channel 1. The following is a list of all possible combinations: Serial ATA 0.0 Adapter 0, Channel 0 (SATA1) 0.1 Adapter 0, Channel 1 (SATA2) 0.2 Adapter 0, Channel 3 (SATA3) 0.3 Adapter 0, Channel 4 (SATA4) Important There is no such thing as Slave drive in Serial ATA. All drives are considered to be Master since there is a one to one connection between the drive and the c o nt r o lle r . B-4