MSI MS 7030 User Guide - Page 49
IDE Primary/Secndry Master/Slave RAID
View all MSI MS 7030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
BIOS Setup IDE Prefetch Mode The onboard IDE drive interfaces support IDE prefetching, for faster drive accesses. When you install a primary and/or secondary add-in IDE interface, set this option to [Disabled] if the interface does not support prefetching. The settings are: [Enabled], [Disabled]. IDE DMA Transfer Access This item is used to enable or disable the DMA transfer function of the IDE Hard Drive. The settings are: [Enabled], [Disabled]. IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sector read/ write. If your IDE hard drive supports block mode (most new drives do), select [Enabled] for automatic detection of the optimal number of block read/writes per sector the drive can support. Settings: [Enabled], [Disabled]. Onboard Device Press to enter the sub-menu and the following screen appears: RAID Config Press to enter the sub-menu and the following screen appears: IDE RAID This item is available for you to enable/disable the onboard IDE RAID function. Setting options: [Enabled], [Disabled]. IDE Primary/Secndry Master/Slave RAID This feature allows users to enable or disable the RAID function for each IDE hard disk drive. Settings: [Enabled], [Disabled]. SATA1/SATA2/SATA3/SATA4 RAID This feature allows users to enable or disable the RAID function for each SATA hard disk drive. The settings are: [Enabled], [Disabled]. 3-13