MSI MS 7030 User Guide - Page 60

MS-7030 ATX Mainboard Cell Menu The items in Cell Menu includes some important settings of CPU, AGP, DRAM and overclocking functions. MSI Reminds You... Change these settings only if you are familiar with the chipset. Current CPU / DDR Clock These two items show the current clocks of CPU & DDR. Read-only. DRAM Configuration Press to enter the sub-menu and the following screen appears: Max Memclock (Mhz) User can place an artificial memory clock limit on the system. Please note that memory is prevented from running faster than this frequency. Setting options: [Auto], [100], [133], [166], [200]. 1T/2T Memory Timing This setting controls the SDRAM command rate. Selecting [1T] allows SDRAM signal controller to run at 1T (T=clock cycles) rate. Selecting [2T] makes SDRAM signal controller run at 2T rate. 1T is faster than 2T. Setting options: [1T], [2T], [Auto]. CAS# Latency (Tcl) This controls the CAS latency, which determines the timing delay (in clock cycles) before SDRAM starts a read command after receiving it. Settings: [Auto], [2.0], [2.5], [3.0]. [2.0] increases the system performance the most while [3.0] provides the most stable performance. 3-24