Mackie ART200A Spec Sheet

Mackie ART200A Manual

Mackie ART200A manual content summary:

  • Mackie ART200A | Spec Sheet - Page 1
    easy installation using specially designed accessory mounting hardware. I This Mackie Industrial product is covered by an exclusive, one-time, NO FAULT repair policy in addition to a five year limited warranty. Two-Way Active Speaker System Features I 90° x 70° constant-directivity horn with 1" exit
  • Mackie ART200A | Spec Sheet - Page 2
    SPEAKER ART200A ART200A Two-Way Active Speaker System Specifications System Acoustic Frequency Range (-10 dB): Frequency Response (-3 dB): Horz. Coverage Angle (-6 dB): Vert. Coverage Angle (-6 dB): Directivity Factor; Q(DI): System Sensitivity1: Rated Maximum Peak2: Crossover: Speaker power
  • Mackie ART200A | Spec Sheet - Page 3
    Two-Way Active Speaker System ART200A Vertical Polars 200Hz 250Hz 0˚ 315Hz 400Hz 500Hz 630Hz 0˚ 800Hz 1kHz 1.25kHz 1.6kHz 0˚ 2kHz 2.5kHz 3.15kHz 4kHz 0˚ 5kHz 6.3kHz Vertical Off-Axis Frequency Response (UP) 8kHz
  • Mackie ART200A | Spec Sheet - Page 4
    ART200A Horizontal Polars 0˚ 200Hz 250Hz 315Hz 400Hz 0˚ 500Hz 630Hz 800Hz 1kHz 0˚ 1.25kHz 1.6kHz 2kHz 2.5kHz 0˚ 3.15kHz 4kHz 5kHz 6.3kHz Horizontal Off-Axis Frequency Response 0˚ 8kHz 10kHz 12.5kHz 16kHz 4 O FoF66 PPAAGGESE S
  • Mackie ART200A | Spec Sheet - Page 5
    ART200A Two-Way Active Speaker (241.3mm) ART 200A ACTIVE SPEAKER SYSTEM INPUT OUTPUT SERVICEABLE PARTS INSIDE. REFER SERVICING MACKIE INDUSTRIAL • MADE IN ITALY PATENTS PENDING • COPYRIGHT ©1999 THE FOLLOWING ARE TRADEMARKS /REGISTERED TRADEMARKS OF MACKIE DESIGN INC.: "MACKIE", "MACKIE INDUSTRIAL
  • Mackie ART200A | Spec Sheet - Page 6
    -Way Active Speaker System ART200A Architects' and Engineers' Specifications The amplified loudspeaker system shall be a self-contained unit, housed in a reinforced polypropylene enclosure and consisting of the following sub-systems: (1) vented twoway loudspeaker system, (2) integrated power ampli
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Art Series
Two-Way Active Speaker System
ART200A
SPEAKER
Careful acoustic design and advanced materials
have resulted in an exceptional full range, full fidelity,
self-contained sound system. The ART200A provides
an ideal combination of high power, low distortion and
wide bandwidth for permanent installations.
The two-way design consists of a 12" woofer that
uses a massive magnet structure for accurate bass
reproduction and a CD horn loaded to a 1" exit com-
pression driver. The CD horn is a part of the molded
enclosure. Two discrete power ampli
ers and an elec-
tronic crossover are matched to the two transducers
and provide time correction, CD horn compensation
and peak-limiting, as well as over-excursion and
thermal protection.
The ART200A will accept a balanced or unbalanced
(switch selected) microphone or line input, adjusted by
a single rotary control.
All components are housed in a lightweight, vented
enclosure formed from polypropylene that is extremely
rigid. The woofer is protected by a metal grille. All con-
trols and connectors are recessed on the rear. A 1-3/8"
stand socket and M10 threaded inserts are molded
into the cabinet to provide quick and easy installation
using specially designed accessory mounting hard-
ware.
This Mackie Industrial product is covered by an
exclusive, one-time, NO FAULT repair policy in addition
to a
ve year limited warranty.
Features
90° x 70° constant-directivity horn with 1"
exit compression driver
12" high-ef
ciency woofer
Internal bi-ampli
er: 120W LF, 40W HF, and
driver-optimized electronic crossover
Switchable balanced mic/line input
Total system protection: over-excursion, thermal,
short circuit and peak limiting
Compact, lightweight polypropylene enclosure
Built-in hand grip, M10
y points and stand socket
Optional installation accessories available
Exclusive Mackie Industrial
one-time, NO FAULT
repair policy
Five year limited warranty
1
O F 6 PA G E S
ART200A
APPLICATIONS
Live Sound/Music Reinforcement
High-Level AV Playback
Large Speech Systems
Active Floor Monitors