Mackie MSW8 Spec Sheet
Mackie MSW8 Manual
 |
View all Mackie MSW8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Mackie MSW8 manual content summary:
- Mackie MSW8 | Spec Sheet - Page 1
paint coated to facilitate repainting. The MSW8 is a part of Mackie Industrial's Monitor Series. This Mackie Industrial product is covered by an exclusive, one-time NO FAULT repair policy in addition to a five year, limited warranty. MSW8 Dual Load Reflex Subwoofer Features 12" high efficiency, sub - Mackie MSW8 | Spec Sheet - Page 2
MSW8 SPEAKER MSW8 Dual Load Reflex Subwoofer Specifications System Freq. Range (-10dB): 35Hz-200Hz Freq. Response (-3dB): 55Hz-150Hz System Sensitivity1: 92dB, 1W @ 1m Rated Maximum SPL: 123dB, @ 1m (both channels) Nominal Impedance: 8Ω Input Power Rating: 300W IEC; 1200W Peak - Mackie MSW8 | Spec Sheet - Page 3
MSW8 Dual Load Reflex Subwoofer Frequency Response is measured on-axis at a distance referenced back to 1m at 1-watt drive. Shown as half space (2π) environment. 11.74" (298mm) 20.01" (508mm) TOP 11.74" (298mm) SIDE 3.54" (90mm) 31.52" (800mm) 3 OF 4 PAGES FRONT REAR 4.92" (125mm) - Mackie MSW8 | Spec Sheet - Page 4
, [email protected] GERMANY +49 2572 96042 0, fax +49 2572 96042 10, [email protected] Electronic files for this product available at: www.mackieindustrial.com This Specification Sheet Architects' & Engineers' Specifications Quick-Start Manual Owner/Operator's Manual CADD files EASE data MSW8
-
1 -
2 -
3 -
4
 |
 |
APPLICATIONS
Dual Load Reflex Subwoofer
MONITOR Series
1
OF 4 PAGES
MSW8
MSW8
SPEAKER
The Monitor MSW8 subwoofer was expressly
designed to complement the Monitor MR8. Alter-
nate satellite speakers, differing from the MR8 in
sensitivity and/or impedance, may be used with
the MSW8, by making use of a switch located on
the terminal plate. The switch bypasses the internal
crossover, allowing bi-amplification.
The MSW8 will handle 300W (IEC) continuous
power, producing 123dB SPL (1m) in a 35Hz–125Hz
bandpass.
Its 12" driver was exclusively created for
subwoofer applications, and features a reinforced
Kapton support for the 3" voice coil. All adhesives
used can withstand operating temperatures up to
300°C. The spider is airtight and acts as a pump to
air cool the magnet assembly. Additionally, a finned
heat sink is present on
the back of the basket.
The rectangular cabinet utilizes a dual load
reflex configuration to maximize the subwoofer's
performance while keeping its size to a minimum.
It is constructed with extremely rigid, high density
particle board to reduce cabinet resonance. Two
convenient hand holds are built-in. It is coated with
scratch resistant, matte black PVC with the excep-
tion of the attractively contoured baffle that is paint
coated to facilitate repainting.
The MSW8 is a part of Mackie Industrial’s
Monitor Series.
This Mackie Industrial product is covered by
an exclusive, one-time NO FAULT repair policy in
addition to a five year, limited warranty.
Low-Frequency Enhancement
Music Enhancement
Special Effects Reinforcement
Entertainment Systems
Features
12" high efficiency, sub-woofer driver
featuring 3" reinforced Kapton
®
voice coil,
finned heat sink and heat resistant adhesives
8
Ω
low inductance passive crossover
with band-limited output terminals for stereo
satellite loudspeakers
Extremely Efficient — Extremely Compact
Dual-load vented, rectangular enclosure,
constructed with high density particle board
for maximum rigidity
Exclusive Mackie Industrial — one-time NO
FAULT repair policy
Five year, limited warranty