Mackie Mix 120 Spec Sheet

Mackie Mix 120 Manual

Mackie Mix 120 manual content summary:

  • Mackie Mix 120 | Spec Sheet - Page 1
    dB Phantom Power +48 VDC Equalization Mono Channel EQ (Mix.50 only): High ±15 dB @ 12 kHz Low ±15 dB @ 80 Hz Mono Channel EQ (Mix.60, Mix.100, Mix.120) Stereo Channel EQ (Mix.60): High ±15 dB @ 12 kHz Mid ±15 dB @ 2.5 kHz Low ±15 dB @ 80 Hz Mixer Rated Output Main, Aux, Control Room
  • Mackie Mix 120 | Spec Sheet - Page 2
    to change these specifications at any time without notice. The TAPCO Mix mixers were recently accidentally awarded first prize by the Society of Juicers, Mixers and Blenders in the "Quadruple Planetary Mixers" category. "TAPCO" is a registered trademark of LOUD Technologies Inc. All other brand names
  • 1
  • 2

17
APPENDIX C: MIX SERIES SPECIFICATIONS
Frequency Response
Mic Input to any Output (Trim at 0 dB):
+0, –1 dB,
10 Hz to 150 kHz
–3 dB,
10 Hz to 200 kHz
Distortion
THD and SMPTE IMD; 20Hz to 20kHz
Mic Input to Main Output:
< 0.005%
@ +4 dBu output
Noise
20 Hz to 20 kHz BW (150
Ω
source impedance)
Equivalent Input Noise (EIN):
–129 dBu
Residual Output Noise:
Channel and Main Mix levels off
Main, Ctrl Room, Phones:
–106 dBu
Common Mode Rejection Ratio (CMRR)
Mic In:
60 dB @ 1 kHz
Gain @ maximum
Crosstalk
Adjacent Inputs or Input to Output:
–90 dB @ 1 kHz
Input Gain Control Range
0 dB to +50 dB
Phantom Power
+48 VDC
Equalization
Mono Channel EQ (Mix.50 only):
High
±
15 dB @ 12 kHz
Low
±
15 dB @ 80 Hz
Mono Channel EQ (Mix.60, Mix.100, Mix.120)
Stereo Channel EQ (Mix.60):
High
±
15 dB @ 12 kHz
Mid
±
15 dB @ 2.5 kHz
Low
±
15 dB @ 80 Hz
Mixer Rated Output
Main, Aux, Control Room:
+4 dBu
Maximum Rated Output:
+22 dBu
Maximum Input Levels
Mic Input:
+12 dBu,
Gain @ +10 dB
Line Input:
+30 dBu,
Gain @ +10 dB
Tape Input and Aux Return:
+22 dBu
Input Impedance
Mic Input:
2.6 k
Ω
, balanced
Line Input:
20 k
Ω
, balanced
Stereo Aux Returns:
20 k
Ω
, balanced
CD/Tape In:
24 k
Ω
, unbalanced
Output Impedance
Main
240
Ω
, balanced
120
Ω
, unbalanced
Ctrl Room, Aux Sends:
120
Ω
Tape Output:
1 k
Ω
Phones Output:
25
Ω
VU Meters
Main Left and Right
4 segments:
Clip (+18), +6, 0, –20
0 LED = 0 dBu
AC Power Requirements
External Power Supply output:
18.5 VAC x 2 @ 150 mA
(3-pin AC power connection)
External Power Supply AC input
U.S.
120 VAC, 60 Hz
Europe
240 VAC, 50 Hz
Japan
100 VAC, 50/60 Hz
Korea
220 VAC, 60 Hz