Mackie S-8 Owners Manual
Mackie S-8 Manual
 |
View all Mackie S-8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Mackie S-8 manual content summary:
- Mackie S-8 | Owners Manual - Page 1
- Mackie S-8 | Owners Manual - Page 2
power supply only of the type described in these operation instructions or as marked on this product. 10. Power Cord Servicing - The user should not attempt to service this product beyond those means described in this operating manual. All other servicing should be referred to the Tapco Service - Mackie S-8 | Owners Manual - Page 3
Appendix A: Service Information 11 Appendix B: Connections 13 Appendix C: Specifications 14 TAPCO LIMITED WARRANTY 15 TAPCO products. What me, read a manual? Before you begin, please make sure you read the Safety Instructions on page 2 and Getting Started on page 4. Your new TAPCO® S•8 monitors - Mackie S-8 | Owners Manual - Page 4
monitor speakers quickly. Follow these steps for all the S•8 studio monitors monitor signal from your mixer (or other signal source) to the INPUT jack on the S•8 Studio Monitor increases when the monitors are placed close to monitors working, it's time to hunker down and read the rest of this - Mackie S-8 | Owners Manual - Page 5
NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. AVIS: • FABRIQUE AU CHINE ©2003 MACKIE DESIGNS, INC. High-Frequency Response Instructions on page 2 for information on hearing protection. • When you shut down your equipment, turn off the S•8 studio monitors - Mackie S-8 | Owners Manual - Page 6
Introduction Thank you for choosing TAPCO S•8 Studio Monitors by LOUD Technologies. The TAPCO product line hails back to the days of TAPCO Corporation, Greg Mackie's first company. TAPCO revolutionized the audio industry back in 1969 with the very first 6-channel mixer specifically designed for - Mackie S-8 | Owners Manual - Page 7
SETTINGS PHONO XLR HIGH FREQ FILTER TRS -2dB 0 +2dB (NORMAL) LOW FREQ FILTER OFF MAX INPUT LEVEL 0 +2dB +4dB (NORMAL) S-8 ACTIVE STUDIO MONITOR INPUTS SETTINGS PHONO XLR HIGH FREQ FILTER TRS -2dB 0 +2dB (NORMAL) LOW FREQ FILTER OFF MAX INPUT LEVEL 0 +2dB +4dB (NORMAL) Left - Mackie S-8 | Owners Manual - Page 8
TAPCO S•8 Features REAR PANEL DESCRIPTION This is where you connect your signal to the monitor and make adjustments to the frequency response of 9 the speakers to match the monitor of the studio monitor. 1. INPUTS SERVICEABLE PARTS INSIDE. REFER SERVICING TO ©2003 MACKIE DESIGNS, INC - Mackie S-8 | Owners Manual - Page 9
(located in the IEC socket) with the 1.6 A fuse included in the accessory bag. See the "Troubleshooting" section on page 11 for instructions on replacing the fuse. 6. POWER Use this switch to turn the active monitors on and off. 7. Line Cord Socket and Fuse Connect the line cord to this IEC socket - Mackie S-8 | Owners Manual - Page 10
8761, or 9501 are commonly used for studio wiring. • Microphone cables work well. • You can purchase quality cables from your Mackie dealer. • In certain home theater own. Contact our tech support department for more information. playing havoc with computer monitors or TV screens. Unshielded - Mackie S-8 | Owners Manual - Page 11
your TAPCO S•8 has a problem, please do everything you can to confirm it before calling for service. Doing so might save you from the deprivation of your monitor and the associated suffering. These may sound obvious to you, but here are some things you can check. Read on. Troubleshooting No Power - Mackie S-8 | Owners Manual - Page 12
monitor needs service, follow these instructions: 1. Review the preceding troubleshooting suggestions. Please. 2. Call Tech Support at 1-800-258-6883, 7 AM to 5 PM PST, to explain the problem Do you have a question about your TAPCO Monitor? Please call our Technical Support chaps at 1-800-258-6883, - Mackie S-8 | Owners Manual - Page 13
Appendix B: Connections XLR Connectors XLR connectors are used to make balanced connections to the S•8. They are wired as follows, according to standards specified by the AES (Audio Engineering Society). SHIELD 2 HOT COLD 3 1 SHIELD 1 XLR Balanced Wiring Pin 1 = Shield Pin 2 = Hot (+) Pin 3 = - Mackie S-8 | Owners Manual - Page 14
steel frame, polypropylene cone woofer High Frequency: Wave guide loaded 1 in/25 mm silk dome tweeter V 230 VAC: T 800 mA H/250 V Power Consumption: 80 watts with music, loud mix 20 watts quiescent (idle) Amplifi TAPCO S•8 BLOCK DIAGRAM 10.15.03 TOROIDAL POWER TRANSFORMER + LO VDC - - Mackie S-8 | Owners Manual - Page 15
Service and repairs of TAPCO products are to be performed only at the factory, or a factoryauthorized service center. Unauthorized service, repairs, or modification will void this warranty. C. To obtain factory service, please follow the instructions safe place. "Mackie." and "TAPCO" are registered - Mackie S-8 | Owners Manual - Page 16
tapcogear.com ©2003 LOUD Technologies Inc. All rights reserved."TAPCO" and "Mackie." are registered trademarks of LOUD Technologies Inc.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
