Mackie SP-41R Quick Start Guide
Mackie SP-41R Manual
 |
View all Mackie SP-41R manuals
Add to My Manuals
Save this manual to your list of manuals |
Mackie SP-41R manual content summary:
- Mackie SP-41R | Quick Start Guide - Page 1
the SP1200/SP2400 power supply on. 2. Before applying power to the SP-41R, make sure the wiring is correct as described in this Quick-Start Guide. Please visit our website at www.mackieindustrial.com for updates and more information on this and other Mackie Industrial products. - Mackie SP-41R | Quick Start Guide - Page 2
J2 GROUND DATA + DATA - 3 0 3 6 9 SP-41R 15 30 REAR VIEW 55 Front Panel Features SELECT BUTTONS Use to select the input source for the SP1200 or SP2400. These buttons correspond to the buttons on the front panel of the SP1200/SP2400. The OFF button deselects Inputs 1-4 and activates the
-
1 -
2
 |
 |
www.mackieindustrial.com
16220 Wood-Red Road NE, Woodinville, WA
98072
USA
TEL
888.337.7404,
FAX
425.487.4337,
EMAIL
UK
+44.1268.571.212,
FAX
+44.1268.570.809 [email protected]
ITALY
+39.0522.354.111,
FAX
+39.0522.926.208 [email protected]
FRANCE
+33.3.8546.9160,
FAX
+33.3.8546.9161 [email protected]
GERMANY
+49.2572.96042.0,
FAX
+49.2572.96042.10 [email protected]
Safety First!
Before connecting and using the
equipment, please read this Quick-Start Guide
carefully and keep it for future reference.
WARNING!
This equipment has been
designed to be installed by qualified
professionals only! There are many factors to
be considered when installing professional
sound reinforcement systems, including
mechanical and electrical considerations, as
well as acoustic coverage and performance.
Mackie Industrial strongly recommends that
this equipment be installed only by a
professional sound installer or contractor.
1. Never install, connect, or disconnect the
remote control with the SP1200/SP2400
power supply on.
2. Before applying power to the SP-41R, make
sure the wiring is correct as described in
this Quick-Start Guide.
Part No. 910-222-20
Rev. B
1/02
© 2002 Mackie Industrial. All Rights Reserved. Printed in the USA.
SP-41R
Remote Switch and Volume Control
Quick-Start Guide
The SP-41R is a real-time remote switch
and volume control for use with the SP1200
and SP2400 Program Controller/Amplifiers.
The SP-41R can be used to select the input
source and adjust the output volume for the
amplifier channel to which it is connected.
Up to ten remote controls can be connected
to the SP1200 or SP2400
REMOTE
connector.
3
0
3
6
9
15
30
55
Installing the SP-41R
The SP-41R can be installed in a double-gang
electrical box with a Decora
®
-style faceplate.
Connecting Multiple Remote
Controls
Up to ten remote controls can be connected
to the SP1200/SP2400 REMOTE bus. The
maximum length of the cable depends on the
type of cable used and the number of remote
controls used in the system.
As a general rule, using 22 gauge wire (at
0.014
Ω
/ft. and 34 pF/ft.), one remote can
be up to 3000 feet away, five remotes can be
up to 2000 feet away, and ten remotes can be
up to 750 feet away before transmission
losses become a factor.
To Next Remote
Total Distance Dependent on Type of Cable Used
From SP1200/SP2400
3
0
3
6
9
15
30
55
3
0
3
6
9
15
30
55
3
0
3
6
9
15
30
55
Distance Chart for SP-41R Cable
Feet of Cable versus
Maximum Number of SP-41R Remotes
Feet of Cable
0
0
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
3000
1
2
3
4
5
6
7
8
9
10
Number of SP-41R Remotes
Please visit our website at www.mackieindustrial.com for updates
and more information on this and other Mackie Industrial products.