Mackie SP1200 Spec Sheet

Sound Palette Series

Single Zone Controller Amplifer

SP1200

oF 6 PAGES

1

OF 6 PAGES

SP1200

AMPLIFIER

Features

m

Single-zone program controller/amplifier

m

4 stereo, line-level program inputs

m

1 Mic input

m

1 Paging Mic input

m

Digital cross-fade between Input sources

m

200 watts/channel at 70V/100V or 8

Ω

m

Transformerless amplifier outputs

m

Ambient noise sensing for page level

m

AGC for music sources

m

3-band sweepable EQ for music sources

m

2-band EQ on each mic input

m

Expandable to 16 zones

m

Dual-zone or stereo operation

m

RS485 port for third-party control systems

Applications

m

Zoned Music Distribution

m

Multi-Zone Paging with Program Distribution

m

Automated Noise-Compensating Gain Systems

m

Music/Speech Reinforcement Systems

m

The SP1200 is a single-channel music controller

and amplifier designed for installations requiring

high performance, flexible features and ease of use.

m

Four independent stereo, line-level inputs are pro-

vided for connection of standard music sources, such

as CD, Tape, Satellite Receiver, etc. Each input is ter-

minated to dual RCA connectors. An integral AGC cir-

cuit automatically compensates for level differences

between input sources. A three-band EQ is provided

for equalization of the music sources. Music Input 1

is buffered to a stereo RCA output that may be used

for music-on-hold or other external applications.

m

One input is provided for a paging microphone,

and is terminated to both Phoenix-type and XLR con-

nectors. Two-band EQ, variable gain, and switchable

phantom power are provided. A variable VOX sensitiv-

ity control allows precise setting of trigger threshold

points. Page Mic activation and music ducking can also

be activated by using the supplied contact terminals.

m

A second microphone input is provided for voice

reinforcement. This input is terminated to a Phoenix-

type connector and offers two-band EQ, variable gain,

and switchable phantom power. The gain of this input

is independent of the master levels set for the music

sources. Settings of the microphone and music levels

are retained in memory, allowing adjustment of one

source without affecting the other.

m

Operator controls provide four music source selec-

tor buttons and one OFF button. LED ladder display

indicates relative level setting. Push buttons are pro-

vided for volume UP and DOWN. All control setting

changes can be made from optional remote controls.

A three-wire remote control bus allows connection of

up to 10 remotes on three conductor cable.

m

The output section of the SP1200 offers 200 watts

of RMS power into either 70/100 Volt lines or into 8-ohm

loads. The transformerless design of the amplifier

allows frequency response to 20 Hz, without the dis-

tortion and losses typical of conventional designs.

m

Many of the SP1200’s functions are under micro-

processor control and management. An RS485 port is

provided on the rear panel to allow interconnection

with industry-standard control systems. Up to eight

SP1200 units may be interconnected, to share four

music sources and control data.

m

This Mackie Designs product is covered by an

exclusive, one-time, NO FAULT repair policy in addi-

tion to a three-year limited warranty.

Mackie SP1200 Spec Sheet

Mackie SP1200 Manual

Mackie SP1200 manual content summary: