Mackie SR244 / SR324 Architect's Specs

MORE INFORMATION

THESE SPECIFICATIONS

ARE AVAILABLE ON 3.5"

PC & MAC FORMAT DISK IN

POPULAR WORD

PROCESSOR FORMATS

■

CALL 800/258-6883

FAX 425/487-4337

OUTSIDE THE U.S., CALL

425/487-4333

2/6/98

LIVE/RECORDING CONSOLES

insert jacks. Additionally,

the mixer shall include a

pre-fader/post-fader solo

function, a main monaural

output with level control

derived from the main

stereo outputs, 6 monitor/

effects send outputs, 4

stereo effects return inputs

with switching for alternate

routing, control room/

headphone monitor

switching and control

functions, 1 stereo control

room monitor output, 2

stereo headphone outputs,

1 set of stereo tape re-

corder convenience out-

puts, and 1 set of stereo

tape monitor inputs.

2. POWER SUPPLY

. All

necessary operating volt-

ages for the mixer shall be

provided by an internal

power supply.

3. INPUT CHANNEL

CONNECTIONS.

Each

monaural input channel

shall have an electroni-

cally balanced micro-

phone level input, accom-

modating a nominal

microphone level

be-

tween –60 dBu and

+14 dBu, and appearing on

the rear panel as a female

XLR–3 type connector. Each

monaural input channel

shall also have an elec-

tronically balanced line

level input, accommodating

a nominal line level of

between –10 dBV and

+4 dBu, and appearing on

the rear panel as a

1

/

4

" TRS

phone jack. Each stereo

input channel shall have a

1. GENERAL CONFIGURA-

TION.

The audio mixer

shall have a free-standing

frame fitted with four

resilient feet suitable for

table-top placement. The

frame shall be comprised

of 20 (SR32•4: 28) monau-

ral input channels, 2 stereo

input channels, 4 submix

output channels and 2

main output channels.The

monaural input channels

shall be capable of accept-

ing either microphone- or

line-level signals, and shall

be fitted with trim, equal-

ization, balance, and

auxiliary send controls;

solo, mute and bus assign

switches; level-indicating

LEDs and insert jacks. The

stereo input channels shall

be capable of accepting

either stereo or monaural

line-level signals, and shall

be fitted with stereo trim,

equalization, balance, and

auxiliary send controls;

solo, mute and bus assign

switches; and level-

indicating LEDs. The

submix outputs shall each

have level, pan, and “air”

controls; solo and assign

switches; and a bus access

insert jack. The main

outputs shall share a

stereo master output fader

and shall be fitted with

left and a right electronically

balanced line level input,

accommodating a nominal

line level of between

–10 dBV and +4 dBu, and

appearing on the rear panel

as

1

/

4

" TRS phone jacks.

These jacks shall be fitted

with internal switching

contacts to accommodate

monaural configuration.

Additionally, each of the

monaural input channels 1

through 20 (SR32•4: 1

through 28) shall offer an

unbalanced

insert connec-

tion, appearing on the rear

panel as a

1

/

4

" TRS phone jack.

®

Mackie SR244 / SR324 Architect's Specs

Mackie SR244 / SR324 Manual

Mackie SR244 / SR324 manual content summary: