Mackie Squeez Spec Sheet

Mackie Squeez Manual

Get Mackie Squeez PDF manuals and user guides View all Mackie Squeez manuals
Add to My Manuals
Save this manual to your list of manuals

Mackie Squeez manual content summary:

  • Mackie Squeez | Spec Sheet - Page 1
    Info SQ•2 -97 dBu Crosstalk @ 20 kHz: < -85 dBu Common Mode Rejection: > 60 dB Compressor Type: Threshold: Ratio: Attack: Release: Output: Auto soft knee/hard knee -40 dBu lb/3.0 kg Disclaimer Since we are always striving to make our products better by incorporating new and improved materials,
  • 1
15
Appendix C: Technical Info
SQ•2 Specifications
Frequency Response
20 Hz to 20 kHz (+0, –1 dB)
Audio Input
Type:
Active balanced XLR
and 1/4" jacks
Impedance:
60 k
Ω
balanced
Maximum Input Level:
+21 dBu balanced and
unbalanced
Audio Output
Type:
XLR and 1/4" jacks
Impedance:
<40 k
Ω
unbalanced
Maximum Output Level:
+21 dBu
THD+N @ 1 kHz, +4 dBu:
0.05% typical
SMPTE IMD, +4 dBu:
0.01%
Noise and Hum, unity gain:
< –93 dBu
Noise and Hum, fully off:
< –97 dBu
Crosstalk @ 20 kHz:
< –85 dBu
Common Mode Rejection:
> 60 dB
Compressor
Type:
Auto soft knee/hard knee
Threshold:
–40 dBu to +20 dBu
Ratio:
1:1 to LIM
Attack:
0.1 ms to 200 ms
Release:
50 ms to 3 sec
Output:
–20 dB to +20 dB
Gate
Type:
Soft gate with expander
Threshold:
OFF to +10 dBu
AIR Filter
Type:
Dynamically controlled
frequency correction
Process:
Variable from Off to Full
Switches
CHAN IN/OUT
Bypass switch
AUTO
Program dependent attack
and release times
Indicators
CLOSE LED for Expander/Gate
AUTO LED for Auto Attack/Release
Channel IN LED for CHAN IN/OUT Status
8-segment green LED Gain Reduction Meter
POWER ON LED
AC Power and Current Requirements
Power Consumption:
12.5 watts
AC Operating Voltages:
U.S.
120 VAC, 60 Hz
Europe
240 VAC, 50 Hz
Japan
100 VAC, 50/60 Hz
Korea
220 VAC, 60 Hz
Fuse:
315 mA @ 100-240 VAC
Physical Dimensions and Weight
Height:
1.75 in/44 mm
Width:
19.0 in/483 mm
Depth:
8.5 in/216 mm
Weight:
6.6 lb/3.0 kg
Disclaimer
Since we are always striving to make our products
better by incorporating new and improved materials,
components, and manufacturing methods, we
reserve the right to change these specifications at
any time without notice.