Mackie Ultramix Installation Guide Win
Mackie Ultramix Manual
 |
View all Mackie Ultramix manuals
Add to My Manuals
Save this manual to your list of manuals |
Mackie Ultramix manual content summary:
- Mackie Ultramix | Installation Guide Win - Page 1
the task of installing your system. Please consult your MIDI interface manuals and other manufacturer's Read Me files for the latest details concerning WIN95 MIDI applications. NOTE: Be sure to also have the latest driver software for your MIDI interface (available from the interface manufacturer - Mackie Ultramix | Installation Guide Win - Page 2
attention to the man behind the curtain.) 4. Click Next. 5. Then, if you want WIN95 to search for your hardware, click Yes. This may take awhile, so if (your interface falls somewhere into all of this). 8. Insert your MIDI interface driver diskette into drive A: and click the Have Disk button. 53 - Mackie Ultramix | Installation Guide Win - Page 3
the Control Panel and double-click on the Multimedia icon. 10. Click on Advanced (we're not messing around). 11. Click on the MIDI Devices and Instruments icon. In our case, since we loaded the appropriate MIDI interface drivers, we have MusicQuest 8PortSE and 2PortSE interfaces shown as options. 54 - Mackie Ultramix | Installation Guide Win - Page 4
box appears. In the illustration, the Properties dialog box shows that the 8PortSE is enabled and active. To enable an inactive port, click the Use MIDI Features option, and then back out of the Control Panel and restart your computer. A GENERAL, YET IMPORTANT NOTE: Let your computer do the routing - Mackie Ultramix | Installation Guide Win - Page 5
program (for example, 8portse.exe) is available to configure the interface MIDI ins and outs, it is normally found in the Driver folder supplied probably won't have this ".exe" file or capability because your MIDI in and out routing is much less flexible. 13. Save the setting and exit the program. 56 - Mackie Ultramix | Installation Guide Win - Page 6
WINDOWS 95 ULTRAMIX SOFTWARE INSTALLATION 1. Insert the UltraMix diskette into your A: drive, open the My Computer icon, and to wipe your feet... 3. To change the location where the UltraMix software will be installed, click Set Location and specify a different folder. Select the options you - Mackie Ultramix | Installation Guide Win - Page 7
be complete without a plea to have you read the Read Me file? 7. Next, open the UltraMix 1.1 application. If you get any prompts that ask you about your hardware setup, please review your MIDI interface manuals and/or earlier hookup suggestions. 8. Restart your computer so all of these settings take - Mackie Ultramix | Installation Guide Win - Page 8
sync device supports MMC, make sure Ext. Sync is not Bypassed. (When it's bypassed, the Ext. Sync button in the UltraMix transport window setup and installation instructions again and see if you can get things straightened out. If you're still stumped, check Appendix G: Troubleshooting, on page
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
52
WINDOWS 95
HARDWARE CONFIGURATION
The following is a review of basic steps through the WIN95
control panel for MIDI setups. We have included this section
to help you with the task of installing your system. Please
consult your MIDI interface manuals and other
manufacturer’s Read Me files for the latest details concern-
ing WIN95 MIDI applications.
NOTE: Be sure to also have the latest driver software for
your MIDI interface (available from the interface
manufacturer).
1. From the Start menu, select Control Panel.
2. If you haven’t installed your interface hardware, double
click on the Add New Hardware icon.