Magnavox 50MF231D User manual, English (US) - Page 27

English Française HDMI (High Definition Multimedia Interface) connectors AUDIO IN VIDEO IN AV1 AV1 : L + R HDMI HDMI is the leading new standard for Digital video and audio interconnection. To the HDMI connector you can connect HDMI devices such as a Set Top Box or compatible DVD-R or DVD player with HDMI, or DVI-equipped devices like a computer. So you can display high-definition pictures on this TV in the digital form. Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI connector. (Then also connect the audio cable to L and R AUDIO jacks of AV1.) Go to menu => Setup => Source => Analog Audio In => and select HDMI. & Connect your HDMI device with one of the HDMI connectors. é Select the connected digital device in the Setup, Source menu, p. 13. The HDMI connectors allow the following TV and monitor display modes: HD Standard Definition TV (SDTV) 640/720 x 480i Enhanced Definition TV (EDTV) 640/720 x 480p High Definition TV (HDTV) 1920x1080i 1280x720p PC VGA 640x480 SVGA 800x600 XGA 1280x768 60 Hz 60 Hz 60 Hz AUDIO IN VIDEO IN AV1 AV1 : L + R HDMI DVI Notes: - If necessary, you can adjust the picture position to the center of the screen with the cursor keys. - Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a device connected to the HDMI input, the DIGITAL AUDIO OUTPUT(SPDIF OUT) signal is muted. - Your TV supports HDCP (High-bandwidth Digital Content Protection). This is a system for protecting DVD content outputted via DVI from being copied. It provides a secure digital link between a video source (DVD, PC, etc.) and your TV. Content is encrypted at the source device to prevent unauthorized copies from being made. - Proper working is only guaranteed with HDMI compliant consumer products. - Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to display properly. - In case no signal is detected from your HDMI device, turn off the HDMI device and then on again. To get an optimal viewing, it is advised to turn your DVD player to one of the following TV display standards: 1920x1080i, 1280x720p, 720x480i or 720x480p. coDnniugs ietnatryl0S5 hudrmri.eopsund receiver SPDIF OUT VIDEO IN AV3 SPDIF OUT AUDIO IN VIDEO IN AV2 Connect a Digital MultiChannel Surround receiver to the DIGITAL AUDIO OUT (SPDIF OUT) connector at the bottom of the TV. Español 23