Magnavox DV220MW9 User manual, English (US) - Page 26

TTRROOUUBBLLESHHOOOOTTININGG Troubleshooting Guide If this unit does not perform properly when operated as instructed in this manual. Refer to the following: Symptom No power. Remedy • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. DVD • VCR This unit does not respond to the remote control. Poor picture or noise. • Check if the power plug is connected to an AC outlet. • You have to be within 23 feet (7m) of this unit. • Check if a cassette tape or disc is in this unit. • Interference signal may be received. Change the position and direction of the unit. VCR Cannot record a TV program. • This unit does not have a tuner to receive TV broadcasting. • You must connect this unit to TV with audio/video output jacks or an external tuner to record TV programs. Refer to "Recording & OTR (One -touch Timer Recording)" on page 20 and "Satellite Link" on page 22. Timer recording is impossible. • Make sure the timer program is set correctly. • Make sure [TIMER REC] indicator on this unit lights up. If not, press [TIMER SET]. • Make sure the VCR clock is set correctly. Cannot go into record mode. • Make sure the cassette tape has a record tab. If needed, cover the hole with adhesive tape. • Activate this unit in VCR mode. Press [VCR ] on the remote control so that the [VCR] indicator will illuminate. Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing [TRACKING K / L]. Cannot view a picture but the audio • Head cleaning may be necessary. Refer to "Auto Head Cleaning" (page 27). is OK. No or poor, playback picture. • Fine tune your TV. • Connect the video cable firmly. Video or color fades in and out when • You cannot copy a copyrighted cassette tape. making a copy of a cassette tape. Cannot remove the cassette tape. • Check if this unit is in the VCR mode. If not, press [VCR ] on the remote control to switch the mode. No picture and sound. • Please confirm to connect to DVD / VCR AUDIO OUT and DVD / VCR VIDEO OUT. DVD No picture. Disc cannot be played back. No sound. No DTS audio is output. Distorted picture. Audio or subtitle language does not match the setting. The camera angle cannot be changed. Audio or subtitle language cannot be changed. " " appears on the TV screen, prohibiting an operation. • Connect the video cable firmly. • Insert a correct video disc that can be played back on this unit. • Press [DVD ] on the remote control. Check if the [DVD] indicator will illuminate. Then try other DVD features. • Insert the disc. • Clean the disc. • Place the disc correctly with the label side up. • Cancel the parental lock or change the control levels. • Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface. • Connect the audio cables firmly. • Turn on the power of the audio component. • Correct the audio output settings. • Correct the input settings on the audio component. • This unit does not support DTS audio. • Connect this unit directly to the TV. • There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction. • Although pictures may stop for a moment, this is not a malfunction. • The selected language is not available for audio or subtitles on the DVD. • The DVD does not always contain sequences recorded from different camera angles. • The DVD does not always contain audio source or subtitles in the selected language. • The operation is prohibited by this unit or the disc. • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on correct operations. • Playback from a desired track and random playback are not available during programmed playback. • Some functions are prohibited on some discs. 26 EN