Magnavox MBH542 Owners Manuals

Reduce the volume level by press

Increase the volume by

3

4

5

6

1

2

1

1.

Button

2.

Micro USB Port (For Charging Only)

3. LED Indicators

4. AUX (In) Jack

5.

Microphone

6.

Button

7.

Button

The unit has a built-in Li-ion rechargeable battery, charge it before first time use or when it is

drained as follows:

1. Connect the small plug from the supplied USB Connection Cable to the Micro USB Port.

2. Connect the full size USB Plug from the supplied USB Connection Cable to the USB Port

on the Personal Computer or USB Charger (Computer and USB Charger not included).

3. When charging, the Red Charging Indicator on the unit will illuminate.When charging is

complete, the indicator will turn off.

NOTES:

Your battery will last longer if you following these simple guidelines for caring and storing:

A. Before first time use, recharge the unit approximately 4 hours until the unit is fully charged.

B. Charge and store the unit within the temperature range of 5°C - 35°C (40°F - 95°F).

C. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until

battery fully drains will damage battery. Battery life will be extended if you keep the battery

fully charged.

D. Battery life naturally shortens slowly over time.

E. The rechargeable battery incorporated in this product is not user replaceable.

For first time use or re-pairing the unit to a new BT Device, pairing it as

below:

1. Press and holding the

Button approximately 3 seconds to power on the unit. The

Blue & Red Indicators will illuminate & blink.

2. Power on the external BT Device and enter to BT searching mode. Start pairing following

the on screen instructions from the external BT Device. When paired, the Blue LED

Indicator will stop blinking and Red LED Indicator will turn off.

3. If pairing is complete you may now play music and answer the phone with your external

BT Device.

4. During playback:

The Blue LED Indicator will start blinking.

Press the

Button to pause; press again to resume normal playback.

Press and holding the

or

Buttons to adjust volume level as desired.

Press and release the

or

Buttons repeatedly to skip tracks.

5. If the unit is paired to a Cell Phone and a call is incoming during an active music session:

Press the

Button then speak to the Microphone to answer the call. When your call

is complete, press the

Button to disconnect or end the call and resume to music

playback.

Or, press and holding the

Button approximately 1 second to decline the incoming

call then resume to music playback.

6. When finish listening,press and holding the

Button approximately 3 seconds until the

Blue Indicator not light.

Notes:

When the external BT Device searched the unit, our model number “MBH542” will

appear on the display of external BT Device.

If while pairing you are asked for a code please try "0000" or "1234".

Normal operation after paired:

1. Power on the external BT Device and enter to BT mode.

2. Press and holding the

Button approximately 3 seconds to power on the unit. The

Blue & Red Indicators will illuminate & blink.

3. Wait a few seconds until the unit automatically pair to the BT Device. When paired, the

Blue LED Indicator will stop blinking and Red LED Indicator will turn off.

4. If pairing is complete you may now play music and answer the phone with your external

BT Device.

AUX (In):

Listen music through the Aux Out; Line Out or Phone Jack from external

audio player:

1. In power off mode, connect one end of the supplied Audio Connection Cable to the

AUX (In) Jack on the unit.

2. Connect the other end to the Aux Out; Line Out or Phone Jack on external audio player.

3. Play the music on the external audio player as usual.

4. Use theVolume controls on the external audio player to adjust volume level as desired.

Note: If the Audio Connection Cable is inserted into the AUX (In) Jack, BT

will be automatically shut off. Unplug the cable from the jack before use BT.

TROUBLESHOOTING

Check the following before requesting service:

SYMPTOM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Can't

power on

Built-in battery drained

Recharge the battery as page

3

No sound or

sound weak

Volume of the unit was set to minimum

position

press and

holding the

Button on the unit

Volume level of paired/connected device is

in low level

Rise the volume level of the

paired/connected device

Sound

distortion

Volume level too high

and holding the

Button on the

Volume level of the

paired/connecteddevice too high

Reduce the volume level of the

paired/connected device

BT not

functioning

The external BT device had NOT paired to

the unit

Pair the external BT device to the

unit as page 3-4

The external BT device too far from the

unit

Place the external BT device close

to the unit

Audio Connection Cable was inserted into

the AUX (In) Jack

Unplug the Audio Connection Cable

from the AUX (In) Jack before use

BT

unit

GENERAL SPECIFICATIONS:

Power source:

Built-in DC

3.7V, 450 mAh (1.665 WH) rechargeable Li-ion

Battery, Recharge by DC

5V through the Micro USB Port

Impedance of the Earbuds:

32

Ω

per Channel

Audio power:

15 mW per Channel

(Total 30mW)

BT Version:

V4.1+EDR

BT Operation Distance:

32 Feet in open area

PACKAGE INCLUDES:

1 x Owner’s Manual

1 x USB Connection Cable (For Charging only)

1 x Audio Connection Cable with 3.5 mm plugs

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT

NOTICE

Magnavox MBH542 Owners Manuals

Magnavox MBH542 Manual

Magnavox MBH542 manual content summary: