Magnavox MC192DMG99 User manual, English (US)
Magnavox MC192DMG99 - Tv/vcr Combination - Mono Manual
 |
View all Magnavox MC192DMG99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Magnavox MC192DMG99 manual content summary:
- Magnavox MC192DMG99 | User manual, English (US) - Page 1
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 1 OWNER'S MANUAL MC132DMG/MC192DMG COLOR TV WITH BUILT-IN VCR READ THIS MANUAL FIRST! CONGRATULATIONS ON PURCHASING THIS PRODUCT. WE'VE INCLUDED EVERYTHING YOU NEED TO GET STARTED. IF YOU HAVE ANY PROBLEMS, OUR REPRESENTATIVES CAN HELP YOU GET THE MOST FROM - Magnavox MC192DMG99 | User manual, English (US) - Page 2
a member of the MAGNAVOX "family," you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT - Magnavox MC192DMG99 | User manual, English (US) - Page 3
VCR owner's manual. This manual describes two models: MC132DMG and MC192DMG. The models may look different, but they operate exactly the same. The MC132DMG is illustrated in this manual. The features described in this manual Timer Recording • instructions help. Magnavox recommends Electrical Code, - Magnavox MC192DMG99 | User manual, English (US) - Page 4
Time Zone 19 Description of Controls Front Panel 20 Rear Panel 21 Remote Control Buttons 22-23 Adjusting the Picture Controls 24-25 On-Screen Status Displays 26 Reminder 27 Basic Operations Playing 28 Recording 29 Recording Options One-Touch Recording 30 Rerecording (Tape Duplication 31 - Magnavox MC192DMG99 | User manual, English (US) - Page 5
screwdriver. 2 To record again, cover the hole with cellophane tape. Before Using the TV/VCR 5 1 2 3 1 2 Using the Remote Control q Point the remote control at the TV/VCR's remote sensor. q Do not put objects between the remote control and the TV/VCR. TV/VCR Maintenance q In this TV/VCR, use only - Magnavox MC192DMG99 | User manual, English (US) - Page 6
or Outdoor Antenna Connect a Cable signal or an antenna to the ANT(enna) Jack. ANT. ANT. B Hooking Up Your TV/VCR With a Cable Box To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box. Connect the Cable - Magnavox MC192DMG99 | User manual, English (US) - Page 7
copy tapes or view tapes that you are playing on the VCR or camcorder. Select channel 00 (A/V IN) at the TV/VCR when viewing tapes that are playing on the VCR or camcorder. Details are on page 31. AUDIO/VIDEO OUT Jacks on VCR Connect an Audio cable to the AUDIO OUT Jack on - Magnavox MC192DMG99 | User manual, English (US) - Page 8
3/22/02 1:21 PM Page 8 8 Turning On the TV/VCR Before you turn on the TV/VCR, make sure batteries are in the remote control and you have connected the TV/VCR correctly. The instructions on this page work only when you turn on the TV/VCR for the first time. 1 Press the POWER button. The TV - Magnavox MC192DMG99 | User manual, English (US) - Page 9
1:21 PM Page 9 Follow the steps below to change the language of the onscreen displays and menus. 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select PRIM. SETUP. Then, press the F.FWD/B button - Magnavox MC192DMG99 | User manual, English (US) - Page 10
following the steps below. 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the .CH PAUSE/STILL VOL. REC/OTR TRACKING MUTE 4 Wait for the TV/VCR to set up channels. Helpful Hints • Line Input mode will always be - Magnavox MC192DMG99 | User manual, English (US) - Page 11
or the Number buttons to select the channel you want to add or delete. TO ADJUST PRESS { / B CH23 > CHANNEL SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM SAVED 4 Press the F.FWD/B button or the REW(ind)/{ button to select SAVED (to add that channel) or DELETED (to delete that channel). Repeat - Magnavox MC192DMG99 | User manual, English (US) - Page 12
are set. Details are on page 10. q You make each entry within 60 seconds of the previous entry. Manual Clock Setting 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select PRIM. SETUP. Then - Magnavox MC192DMG99 | User manual, English (US) - Page 13
2 for PM. For example, for 9:30 PM, press 09, 30, 2. SET MANUAL CLOCK TIME 09 : 30 PM MONTH TO CORRECT PRESS CLEAR TO END PRESS EXIT 6 Press press 07, 14, 02. The day of the week will appear automatically. SET MANUAL CLOCK TIME 09 : 30 PM DATE 07 / 14 / 2002 SUNDAY TO CORRECT PRESS - Magnavox MC192DMG99 | User manual, English (US) - Page 14
PBS Channel Selection 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE - Magnavox MC192DMG99 | User manual, English (US) - Page 15
flashes on the TV/VCR screen. 7 When the TV/VCR finds the PBS channel VCR screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several minutes. When you turn on the TV/VCR 6 Wait for the TV/VCR to find the time. the time on the TV/VCR screen, press the STATUS/ - Magnavox MC192DMG99 | User manual, English (US) - Page 16
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 16 16 Setting the Clock (cont'd) Manual PBS Channel Selection 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select PRIM. SETUP. Then, press the F.FWD/B - Magnavox MC192DMG99 | User manual, English (US) - Page 17
the PLAY/v button or the STOP/w button to select SET PBS CH. MANUAL. Then, press the F.FWD/B button. AUTO CLOCK (PBS) CH 02 TIME NOW SEARCHING TO END PRESS EXIT 7 NOW SEARCHING flashes on the TV/VCR screen. 8 When the TV/VCR finds the clock data, the time will appear on the screen. Press - Magnavox MC192DMG99 | User manual, English (US) - Page 18
the steps below. 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE PRESS - Magnavox MC192DMG99 | User manual, English (US) - Page 19
select SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE PRESS MUTE Helpful Hints • If you select AUTO at step 5, the TV/VCR will set the clock according to the time zone data of the PBS station - Magnavox MC192DMG99 | User manual, English (US) - Page 20
Remote Sensor Receives a signal from your remote control so you can operate the TV/VCR from a distance. CHANNEL o/p Buttons Press to scan through the TV/VCR once to start a recording. Details are on page 29. Press repeatedly to start a One-Touch Recording (an immediate timed recording, 30 minutes to - Magnavox MC192DMG99 | User manual, English (US) - Page 21
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 21 Rear Panel 21 ANT. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. ANT(enna) Jack Connect your antenna or cable here. Details are on page six. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six. - Magnavox MC192DMG99 | User manual, English (US) - Page 22
/02 1:21 PM Page 22 22 Remote Control Buttons SLEEP/WAKE UP Button Press to set the Sleep Timer. Details are on page 47. Press to set the Wake Up Timer. Details are on page 48. POWER Button Press to turn on or off the TV/VCR. PLAY/v Button Press to play a tape - Magnavox MC192DMG99 | User manual, English (US) - Page 23
1:21 PM Page 23 Remote Control Buttons (cont'd) 23 CLEAR Button Press to erase incorrect data when programming TV/VCR functions. Also, press to During recording, press to temporarily stop the recording. Press again to resume recording. Details are on page 29. You cannot pause a One-Touch Recording. - Magnavox MC192DMG99 | User manual, English (US) - Page 24
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 24 K K 24 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR's brightness, picture, color, tint, and sharpness. 1 Press the MENU button. TO ADJUST PRESS { / B > BRIGHTNESS PICTURE COLOR TINT SHARPNESS TV RESET 2 Press the PLAY/v button or - Magnavox MC192DMG99 | User manual, English (US) - Page 25
25 BRIGHTNESS PICTURE COLOR TINT SHARPNESS Press the REW(ind)/{ button to decrease a picture control. Press the F.FWD/B button to increase a picture control. Adjusting the Picture Controls (cont'd) 25 Decrease decreased brightness decreased contrast paler more purple softer Increase increased - Magnavox MC192DMG99 | User manual, English (US) - Page 26
. 1 Press the MENU button. 2 Press the PLAY/v button or the STOP/w but- ton to select VCR SETUP, then press the F.FWD/B button. 3 Press the PLAY/v button or the STOP/w button to select cannot view closed captions during recording or tape playback if COUNTER ONLY is ON. Details are on pages 50-51. - Magnavox MC192DMG99 | User manual, English (US) - Page 27
when closed captioning is selected. Set REMINDER to ON or OFF by following the steps below. 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select REMINDER. TO ADJUST PRESS { / B > REMINDER OFF - Magnavox MC192DMG99 | User manual, English (US) - Page 28
3/22/02 1:21 PM Page 28 28 Playing Follow the steps below to play a tape. 1 Insert a tape in the TV/VCR. The power will come on. If the tape's record tab is missing, playback should start automatically. 2 If playback does not start automatically, press the PLAY/v button to start playback. 3 Press - Magnavox MC192DMG99 | User manual, English (US) - Page 29
or the Number buttons to select the channel you want to record. You cannot change channels during recording. 4 Press the REC(ord)/OTR button once to start recording. The Record light will glow. q If there is not a tape in the TV/VCR, NO CASSETTE flashes on the screen briefly. q If the tape does - Magnavox MC192DMG99 | User manual, English (US) - Page 30
press the CLEAR button, then press the STOP/w button on the remote control. If the end of a tape is reached during an OTR, recording will stop. The TV/VCR will turn itself off and eject the tape. The Record light will flash rapidly. The TV/VCR will turn off at the end of the OTR. 4 Press - Magnavox MC192DMG99 | User manual, English (US) - Page 31
, press the STOP button on the unit. 3 The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape's record tab is intact. The TV/VCR power will turn on automatically. 4 Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears on the - Magnavox MC192DMG99 | User manual, English (US) - Page 32
q A tape is in the TV/VCR. Make sure the tape's record tab is intact and the tape is long enough to record the program. Complete each step within 60 you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to - Magnavox MC192DMG99 | User manual, English (US) - Page 33
TO END PRESS EXIT Instructions continue on page 34. Helpful Hints • If you enter numbers that do not match the TV/VCR's clock or calendar, the entry will be rejected and a question mark will appear on the screen. • To make corrections while you are programming a timer recording, press the CLEAR - Magnavox MC192DMG99 | User manual, English (US) - Page 34
example, for July 16, 2002, press 07, 16. The day of the week and the year will appear automatically. (You cannot program the TV/VCR to record more than one year in advance.) ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP - Magnavox MC192DMG99 | User manual, English (US) - Page 35
Recording (cont'd) 35 Checking or Clearing Timer Recordings 1 With the TV/VCR on, press the MENU button. 2-4 2 Press the PLAY/v button or the STOP/w button to select VCR AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled - Magnavox MC192DMG99 | User manual, English (US) - Page 36
EXIT 3 Press the PLAY/v button or the STOP/w button to select DEFEAT RECORDING, then press the F.FWD/B button so that ON appears beside DEFEAT RECORDING. VCR SETUP ONE TIME PLAY [ON] REPEAT PLAY ON-SCREEN MODE > DEFEAT RECORDING [ON] BLUE BACKGROUND [ON] SELECT KL CHOOSE B TO END PRESS EXIT - Magnavox MC192DMG99 | User manual, English (US) - Page 37
the STOP/w button to select REPEAT PLAY, then press the F.FWD/B button so that ON appears beside REPEAT PLAY. VCR SETUP ONE TIME PLAY > REPEAT PLAY [ON] ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON] SELECT KL CHOOSE B TO END PRESS EXIT 4 Press the STATUS/EXIT button. Now, when - Magnavox MC192DMG99 | User manual, English (US) - Page 38
KL CHOOSE B TO END PRESS EXIT 4 Press the PLAY/v button or the STOP/w button to select REPEAT PLAY. VCR SETUP ONE TIME PLAY [ON] > REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON] SELECT KL CHOOSE B TO END PRESS EXIT 5 Press the F.FWD/B button repeatedly so that - Magnavox MC192DMG99 | User manual, English (US) - Page 39
the end position (B) must be at least three minutes. 9 The TV/VCR will immediately rewind the tape to the start position (A) and repeat playback to not appear on the screen at step 6 if a tape is not in the TV/VCR. NO CASSETTE will flash on the screen briefly. • You cannot rewind or fast forward - Magnavox MC192DMG99 | User manual, English (US) - Page 40
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 40 40 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 Press - Magnavox MC192DMG99 | User manual, English (US) - Page 41
five minutes to protect the TV/VCR and the tape from damage. • SP/LP/SLP means this feature will work with tapes recorded in Standard Play, Long Play, speed, see page 29. • LP/SLP means this feature will work with tapes recorded in Long Play and Super Long Play. For details on tape speed, see page - Magnavox MC192DMG99 | User manual, English (US) - Page 42
VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select SMARTLOCK. Then, press the F.FWD/B button. SMARTLOCK _ ___ Enter Your Access Code 3 Use the Number buttons to enter your access code. The default code is 0711. If you have not set up your - Magnavox MC192DMG99 | User manual, English (US) - Page 43
BLOCKED..." or "PLAYBACK BLOCKED..." message appears and you want to view this programming, enter your access code. The channel will remain blocked until you enter the correct code. If you do not know the code, you will have to select another channel or press the STOP/p button. • Ratings will remain - Magnavox MC192DMG99 | User manual, English (US) - Page 44
code, follow these steps. 1 Press the MENU button. > SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR code in the New Code space. Then, enter the same code in the Confirm Code space. Your new access code should be recorded. You will return to the SMARTLOCK menu. New Code _ ___ Confirm Code - Magnavox MC192DMG99 | User manual, English (US) - Page 45
45 To check the SmartLock settings and see which ratings you have blocked, follow these steps. 1 Press the MENU button. > REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION PRESS B 2 Press the PLAY/v button or the STOP/w button to select REVIEW. Then, press the F.FWD/B button so that the - Magnavox MC192DMG99 | User manual, English (US) - Page 46
to select BLUE BACKGROUND. Then, press the F.FWD/B button repeatedly so that OFF (or ON) appears beside BLUE BACKGROUND. VCR SETUP ONE TIME PLAY [ON] REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] > BLUE BACKGROUND [ON] SELECT KL CHOOSE B TO END PRESS EXIT 4 Press the STATUS/EXIT button - Magnavox MC192DMG99 | User manual, English (US) - Page 47
program the TV/VCR to shut off in a certain amount of time. 1 Press the SLEEP/WAKE UP button (located on the upper right corner of the remote). TO ADJUST timer during a recording.) TO ADJUST PRESS s / B -TIMER- > SLEEP WAKE UP ON-TIME 30 MIN 3 Press the STATUS/EXIT button. The TV/VCR will shut - Magnavox MC192DMG99 | User manual, English (US) - Page 48
VCR if you want the TV/VCR to start tape playback at the specified time. q Make sure no timer recordings are set for the time at which you want the TV/VCR the MENU button. 5 Press the POWER button to turn off the TV/VCR. The TV/VCR will turn itself on at the specified time. 5 POWER SLEEP/WAKE UP - Magnavox MC192DMG99 | User manual, English (US) - Page 49
will remain on the screen even when you press the VOL(ume) o/p buttons or the MUTE button. 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select PRIM. SETUP. Then, press the F.FWD/B button - Magnavox MC192DMG99 | User manual, English (US) - Page 50
dialogue in a foreign language, or information (such as a channel guide, schedule, or announcements). Follow the steps below to select closed is not broadcast, you cannot receive it. This does not indicate a problem with the TV/VCR. Refer to your area's TV program listings for shows with closed - Magnavox MC192DMG99 | User manual, English (US) - Page 51
OTR TRACKING MUTE 4 Helpful Hints • You cannot view closed captions during recording or tape playback if COUNTER ONLY is ON. Details are on page to keep pace with the on-screen action. This does not indicate a problem with the TV/VCR. • To cancel closed captions, follow steps 1-2 on page 50. At - Magnavox MC192DMG99 | User manual, English (US) - Page 52
picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below). Manual Tracking To adjust the tracking manually, press the CHANNEL o/p buttons on the TV/VCR or the TRACKING / buttons on the remote control during playback. Your picture - Magnavox MC192DMG99 | User manual, English (US) - Page 53
/MC192DMG 3/22/02 1:21 PM Page 53 AUDIO In Jack: jack on the front of the TV/VCR which is used to record audio from another source. Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) o/p buttons, you only scan through channels - Magnavox MC192DMG99 | User manual, English (US) - Page 54
problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if - Magnavox MC192DMG99 | User manual, English (US) - Page 55
PM Page 55 Helpful Hints (cont'd) 55 The remote control is not available, or the remote control will not access the menu. • Use the buttons on the front of the TV/VCR to access the menu. You cannot enter numbers (for example, to program a timer recording) using the front panel buttons. Details are - Magnavox MC192DMG99 | User manual, English (US) - Page 56
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 56 56 Specifications General CRT: 13-inch in line gun (MC132DMG) 19-inch in line gun (MC192DMG) Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 - Magnavox MC192DMG99 | User manual, English (US) - Page 57
RENEWED 90 DAY LIMITED WARRANTY - Magnavox MC192DMG99 | User manual, English (US) - Page 58
-17 closed caption system . . . .50-51 color, adjusting 24-25 connections 6-7, 31 contents, table of 4 controls remote 22-23 tv/vcr 20 counter only mode 26 daylight-savings time 18 defeat recording 36 duplication 31 earphone jack 20 ejecting a tape 55 fast forward search 41 f.fwd button - Magnavox MC192DMG99 | User manual, English (US) - Page 59
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 59 - Magnavox MC192DMG99 | User manual, English (US) - Page 60
PLAY STOP STATUS/EXIT F.FWD 3 6 CLEAR CH. VOL. MUTE SLEEP/WAKE UP Remote Control 4835 218 37337 Two AA Batteries 4835 138 17012 This owner's manual is made of recycled paper. As an ENERGY STAR® Partner, Magnavox has determined that this product meets the ENERGY STAR® guidelines for energy
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
 |
 |
MC132DMG/MC192DMG
C
OLOR
TV
WITH BUILT-IN
VCR
O
WNER
’
S
M
ANUAL
R
EAD THIS MANUAL FIRST
!
C
ONGRATULATIONS ON PURCHASING THIS PRODUCT
.W
E
’
VE INCLUDED
EVERYTHING YOU NEED TO GET STARTED
.I
F YOU HAVE ANY PROBLEMS
,
OUR
R
EPRESENTATIVES CAN HELP YOU GET THE MOST FROM YOUR
NEW PRODUCT BY EXPLAINING
:
• H
OOKUPS
• F
IRST
T
IME
S
ETUP
• F
EATURE
O
PERATION
D
O NOT ATTEMPT TO RETURN THIS PRODUCT TO THE STORE
.
F
OR FAST HELP
,
CALL US FIRST
!
1-800-705-2000
T
HANK YOU FOR MAKING US A PART OF YOUR HOME
!
I
MPORTANT
!
R
ETURN YOUR
W
ARRANTY
R
EGISTRATION
C
ARD WITHIN
10
DAYS
.
S
EE WHY INSIDE
.
MC132DMG/MC192DMG
3/22/02
1:21 PM
Page 1