Magnavox MC325n Owners Manual

Magnavox MC325n Manual

Magnavox MC325n manual content summary:

  • Magnavox MC325n | Owners Manual - Page 1
    important operating and maintenance (servicing) instructions in the literature accompanying to operate the equipment. MODEL: MC325n 1 2 3 4 封面 Size: adjustments as outlined in the Owner's Manual which can be performed by the customer relation to this product. MAGNAVOX and SMART. VERY SMART
  • 1

封面
尺寸:90*120mm
封底
反面
正面
1
2
3
4
5
6
CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE
THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:
The lighting flash with
arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electric shock to persons.
ATTENTION:
The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: USE UNDER SUPERVISION OF AN ADULT
DUE TO LONG CORD
This unit has a long cord that can be easily tripped on or pulled on,
causing injury. Please make sure it is arranged so that it will not drape
over a tabletop, etc. Where it can be pulled on by children or tripped
over accidentally.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
To assure continued operation, follow the attached installation
instructions and use only shield cables when connecting to other
devices. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
8
9
10
11
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO
CHANGE WITHOUT NOTICE
FREQUENTLY ASKED QUESTIONS:
Q: Can this antenna receive digital or work with Analogue
(NTSC) and Digital (ATSC) broadcasts?
A:
Yes, this antenna is designed to receive Analogue
(NTSC); Digital (ATSC) and HDTV broadcasts in the
UHF & VHF bandwidths.
Q: Where should I place the antenna in order to get the best
reception possible?
A: Choose a location near a window which gives the antenna a clear view
of the transmitter. Place the antenna away from the metal surface to
avoid interference.
12
GENERAL SPECIFICATIONS:
Frequency Coverage:
VHF: 40 – 230 MHz
UHF: 470 – 860 MHz
Impedance of antenna:
75 Ω
Type of antenna:
F type
Power source of Detachable Amplifier:
DC
12V, 50 mA,
(Center Positive)
PACKAGE INCLUDES:
7
QTY
1
1
1
1
2
2
Description
Image
User’s Manual
Main Unit
AC/DC Adaptor
Input: AC 110-120V~, 60Hz; 25mA
Output: DC
12V, 50 mA,
(Center Positive)
Detachable Amplifier
SET UP:
Determine the signal strength:
Before Installation, determine the best location for optimum reception. It is
important for the antenna to have an unobstructed path to the transmitter.
For best results, ensure the antenna faces the location of the transmitter.
Notes:
● Choose a location near a window which gives the antenna a clear
view of the transmitter.
● Place the antenna away from the metal surface to avoid interference.
Installation:
The antenna can place on the table or mount on wall as follows:
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill two (2) 6mm diameter x 30mm deep holes by a powerful electric
drill (Not Supplied) as illustrated below:
2. Connect the coaxial cable from the Detachable Amplifier to your
Television ; Satellite Receiver and/or Video Cassette Recorder
as is illustrated below:
3. Connect the round plug from the AC/DC Adapter to the DC IN Jack on
the Detachable Amplifier as is illustrated below:
3. Insert the supplied plastic inserts into the holes by hammer
(Not Supplied).
4. Secure the supplied screws into the plastic insert and leave approx.
0.3 inch length to hook the antenna. Then put the antenna onto the
mounting screw as illustrated below. Make sure they are firm and stable.
Connection:
1.Connect the Detachable Amplifier to the coaxial cable from the Main unit
as is illustrated below:
4. Connect the AC/DC Adapter to wall outlet having AC 110-120V, 60Hz
as is illustrated below, the power on indicator on the Detachable
Amplifier and the Main Unit will illuminate.
Note:
For energy saving, if you will not watching the Television for an
extended period of time. Unplug the AC/DC Adapter from the wall
outlet.
Clockwise
to tight
Counterclockwise
to loose
SAT/VCR
SAT/VCR
SAT/VCR
0.3inch
2
φ
6×30mm
12
mm
3
Metallic screws
Plastic inserts
MODEL: MC325n
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
OWNER'S MANUAL
HDTV INDOOR DIGITAL ANTENNA
with Amplifier | VHF•UHF
Size: 148.5(W) x 210(H)mm (A5)
Craig Electronics warrants this product to be free from manufacturing defects in material
and workmanship under normal use for a period of 180 days from date of purchase. If
service is required, please return the product to the store where it was purchased for
exchange; or, pack the unit in the original packing material with all accessories if
applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $3 (to
cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in
Canada, please make sure that the cashier check or money order is redeemable through
a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if
the unit cannot be repaired or replaced, a refund will be forwarded to you within four
weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
This product has been manufactured by and is sold under the responsibility of Craig
Electronics Inc, and Craig Electronics Inc
is the warrantor in relation to this product.
MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips
N.V. and are used under license from Koninklijke Philips N.V.
To Obtain Service on your Product
Printed in China
MC325n_WC_E0HS1_B0US
LIMITED WARRANTY
mm