Magnavox MDR513H User manual, English (US) - Page 32
SETTING THE CLOCK, Auto Clock Setting
UPC - 609585189706
View all Magnavox MDR513H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SETTING THE CLOCK Auto Clock Setting This unit can set the time and date automatically by referring to a channel that carries a clock information. If a PBS (public broadcasting station) is available on Cable in your area, follow "Auto Clock Setting" below. If not, follow "Manual Clock Setting" on page 34. Make sure • The cable TV connections are correct. • Channels are set. (Refer to page 29.) OPEN/ STANDBY-ON DTV/TV SOURCE CLOSE .@/: ABC DEF GHI JKL MNO CHANNEL PQRS TUV WXYZ SPACE CLEAR SETUP AUDIO REPEAT HDMI DISC MENU TITLE OK DISPLAY RETURN V.REPLAY V.SKIP RAPID PLAY D.DUBBING TIMER HDD DVD REC MODE REC Note • The clock may set itself automatically after you connect the antenna/cable signal and plug in the power cord. • Only the Analog PBS channel Cable TV signal is effective for auto clock setting. • For analog auto clock setting, incorrect time may be obtained depending on the broadcast information. If this occurs, set the "Auto Clock Setting" to "OFF" at step 4 above and try "Manual Clock Setting" on page 34. 32 EN ANALOG AUTO CLOCK SETTING (Cable TV only) 1 Press [SETUP] and use [K / L] to select "General Setting", then press [OK]. "General Setting" menu will appear. 2 Use [K / L] to select "Clock", then press [OK]. "Clock" menu will appear. 3 Use [K / L] to select "Auto Clock Setting", then press [OK]. 4 Use [K / L] to select "Auto", then press [OK]. Auto Clock Setting OFF Auto Manual 5 Press [SETUP] to exit. 6 Press [STANDBY-ON y] to turn the unit to the standby mode. This unit will search for the time only when the power is in the standby mode. Initially leave it in standby mode for at least 15 minutes to give this unit time to set the clock. Once the clock is set, the unit receives the clock data at 12:00 am & 12:00 pm when unit is in standby mode. Check the time after the Auto Clock was set, if it is incorrect time then set the "Auto Clock Setting" to "OFF" in step 4 above. Then try "Manual Clock Setting" on page 34. Manual Auto Clock Setting If the unit chooses an incorrect PBS channel on Cable TV, set the PBS channel manually by following the steps below. 1 Select "Manual" at step 4 above, then press [OK]. 2 Use [the Number buttons] or [K / L] to enter your Cable TV Analog PBS channel number, then press [OK]. Set Channel No. CH 1 3 Press [SETUP] to exit and turn the unit to the standby mode.