Magnavox MRD300 User manual, English (US)

Magnavox MRD300 - Audio System Manual

Magnavox MRD300 manual content summary:

  • Magnavox MRD300 | User manual, English (US) - Page 1
    MRD300 MAGNAVOX S M A RT. V E RY S M A RT. Printed in China First connect ... Front Speaker ( the video from the DVD system so it can play through the TV's Antenna connector. Refer to your owner's manual for proper connection (refer to page 9 in the owner's manual.) When listening to TV programs
  • Magnavox MRD300 | User manual, English (US) - Page 2
    remote to select features. Follow the instructions given in the disc menu. 5 To stop playback, press STOPÇ. Region Codes modulator. * See your TV manual for more details. DVD system Video Output Selection for Proper problem access to the Setup Menu, use the VIDEO OUT for connecting the DVD system
  • Magnavox MRD300 | User manual, English (US) - Page 3
    S M A RT. V E RY S M A RT. MRD300 DVD VIDEO DIGITAL SURROUND SYSTEM Need help? Call us! Magnavox representatives are ready to help you with any questions about your new product. We can guide you through Connections, First-time Setup, or any of the Features. We want you to start enjoying your
  • Magnavox MRD300 | User manual, English (US) - Page 4
    As a member of the Magnavox "family," you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
  • Magnavox MRD300 | User manual, English (US) - Page 5
    English Español Index English 6 Español 31 INDEX 3
  • Magnavox MRD300 | User manual, English (US) - Page 6
    accordance with the manufacturer´s instructions. 8. Do not install .Refer all servicing to qualified service personnel. Servicing is required when sure that the antenna system is grounded so as to Code, ANSI / NFPA 70 provides information with respect proper grounding of the mast and supporting
  • Magnavox MRD300 | User manual, English (US) - Page 7
    must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by or disassembly is prohibited. Important Notes Laser Type Wave length Output Power Beam divergence Semiconductor laser GaAIAs 650nm 7mW 60 degree The set
  • Magnavox MRD300 | User manual, English (US) - Page 8
    Remote Control 11-12 Preparations Inserting batteries into the remote control 13 Switching on the system 13 Setting up the surround sound system MP3/Picture disc (Kodak, JPEG 22 Supported MP3 format 22 Radio Reception Tuning to Troubleshooting 26 Glossary 27 Limited Warranty 28 6 CONTENTS
  • Magnavox MRD300 | User manual, English (US) - Page 9
    300-Watt DVD Digital Home Cinema System creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology. Features include: Built-in DolbyR Digital decoder, supporting DolbyR ProLogic Use the Home Cinema Audio System
  • Magnavox MRD300 | User manual, English (US) - Page 10
    connections with the power switched on. - The type plate is located at the rear or bottom of the system. Step 1: Connecting antennas AM Indoor Loop Antenna Use the supplied AM loop antenna, connect the black wire to supplied. Please refer to the SPECIFICATIONS section of this manual. 8 CONNECTIONS
  • Magnavox MRD300 | User manual, English (US) - Page 11
    Follow the instructions provided with the RF modulator to connect the DVD system to your . - Always refer to the owner's manual of the other equipment for complete connection and system's AUDIO IN (TV or AUX) jacks to the AUDIO OUT jacks on the other audio/visual device (such as a TV, VCR, Laser
  • Magnavox MRD300 | User manual, English (US) - Page 12
    DISC DIRECT PLAY OPEN•CLOSE iR SENSOR DVD VIDEO DIGITAL SURROUND SYSTEM VOLUME STOP PROGRESSIVE SCAN TUNER•BAND TV•AUX DVD MUTE close the disc tray. 4 Disc carousel tray 5 iR SENSOR - receives signals from the remote control. 6 STOP (Ç) (in Disc mode only) - to stop playing the disc. 7
  • Magnavox MRD300 | User manual, English (US) - Page 13
    Ç á TITLE ANGLE ZOOM GOTO LANGUAGE SUBTITLE N/P DIM REPEAT A/B SHUFFLE PROGRAM DISC SKIP DISC NO SLOW/MEM CD MODE ST/MONO LISTENING AUDIO 1 2 3 4 5 6 7 8 9 0 Notes for remote control: - While the system is in active mode, select the source you wish to control by pressing SOURCE key on the
  • Magnavox MRD300 | User manual, English (US) - Page 14
    Display on the TV. £ SETUP (in DVD mode only) - to enter or exit the system setup menu. ≤ PREVí / NEXTë - in Disc mode, to skip to the previous/next ‹ ST/MONO - to switch between Monaural and stereo mode during FM stereo reception. Remote Control ) ¡ ™ £ ≤ SOURCE 1 2 3 SLEEP 4 5 6 7 8
  • Magnavox MRD300 | User manual, English (US) - Page 15
    system to the active power outlet. 2 Press POWER ON•OFF y to turn on the DVD system. 3 Press DVD, TUNER•BAND or TV•AUX (or press SOURCE on the remote instruction manual for system You must connect all the speakers and set up the system properly in order to enjoy the Digital Cinema experience at home
  • Magnavox MRD300 | User manual, English (US) - Page 16
    right, surround left or subwoofer.) 3 Adjust VOLUME (or press VOL +- on the remote control) to change the channel level. FL, CNT, FR, SR, SL or Subwoofer - If the connected TV is compatible with both NTSC and PAL (multi-system,) select this mode. The output format will be in accordance with the video
  • Magnavox MRD300 | User manual, English (US) - Page 17
    This setting is used to select the type of video connection between your DVD system and TV. 1 Press SETUP. SETUP MENU - - MAIN PAGE 2 Select 'ENGLISH.' 5 To close the menu, press SETUP again. 6 Press DISPLAY on the remote control to switch on/off the on screen display (OSD) on the TV. Helpful
  • Magnavox MRD300 | User manual, English (US) - Page 18
    the front speakers, you can set the rear delay time to improve the surround sound effect. Test Tone (TEST) - If set to 'ON,' the system will test the speaker settings. The test signal is generated through the left, center, right, and surround speakers. 16 PREPARATIONS Setting the digital output
  • Magnavox MRD300 | User manual, English (US) - Page 19
    The same function can also be accessed from the AUDIO button on the remote control. Balancing the volume level through setting the dynamic range (for discs SCREEN SAVER SETUP again. ➜ If set to 'ON', when you leave the system in stop or pause mode for more than one minute, the screen saver will
  • Magnavox MRD300 | User manual, English (US) - Page 20
    English Setting the parental control level This feature lets you set a playback limitation level. Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain
  • Magnavox MRD300 | User manual, English (US) - Page 21
    Picture (Kodak, JPEG) files on CD-R(W). Region Codes DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD system. You cannot play discs that are labeled for other regions. ALL 1 Helpful Hint: - If you are having trouble playing a certain disc, remove the disc and try
  • Magnavox MRD300 | User manual, English (US) - Page 22
    single track. Fast searching for a particular passage 1 Press à or á on the remote control to fast reverse or forward the disc. There are four scan speeds. Each press . For example, DVDs programmed with complex contents provide guide menus, and those recorded with various languages provide menus
  • Magnavox MRD300 | User manual, English (US) - Page 23
    display. To set PBC on /off G Stop playback and press MENU on the remote control to toggle between 'PBC ON' and 'PBC OFF.' When playing a disc Playing CDs only When activating CD MODE, only CDs will be played. The system will automatically skip over any DVDs or Video CDs in the disc carousel tray
  • Magnavox MRD300 | User manual, English (US) - Page 24
    99 tracks, "FULL" is displayed. - The programmed contents are lost if you turn off the DVD system or open the disc tray. Playing MP3 / Picture disc (Kodak, JPEG) Supported / T on the system) to select another title/picture in the current folder. G Use 1 2 3 4 keys on the remote to rotate or flip the
  • Magnavox MRD300 | User manual, English (US) - Page 25
    •BAND again to select the desired band : FM or AM. 4 Press and hold S or T (or í / ë on the remote control) until the frequency indication starts to change, then release. ➜ The system automatically tunes to the next strong radio station. L R S STEREO G To tune to a weak station, press S or T (or
  • Magnavox MRD300 | User manual, English (US) - Page 26
    to a VCD, MP3-CD or audio CD G Press LISTENING repeatedly to select : Dolby Pro Logic ™ Stereo Sleep timer setting The sleep timer enables the system to switch to standby mode automatically at a preset time. 1 Press SLEEP repeatedly to select a preset time. ➜ The selections are as follows (time in
  • Magnavox MRD300 | User manual, English (US) - Page 27
    SECTION Output power ...300 W - Stereo SECTION Laser Type Semiconductor Disc Diameter 12cm / 8cm Video Decoding MPEG-2 Video DAC ...10 Bits Signal System PAL REMOTE CONTROL Effective Range 8 Meters Battery (1.5V) ...AAA x 2 Specifications SPEAKERS Front speakers / Rear (surround) speaker System
  • Magnavox MRD300 | User manual, English (US) - Page 28
    system. - Set your TV to the correct Video In channel. These channels are usually near channel 00. Or, you may have a button on the TV remote control that selects Auxiliary or A/V IN channel. See your TV owner's manual Check the disc type, color system and regional code. Check for any scratches or
  • Magnavox MRD300 | User manual, English (US) - Page 29
    level is higher than the user-set level. PCM (Pulse Code Modulation): A system for converting analog sound signal to digital signal for later processing . By using menu screens recorded on a Video CD or SVCD that supports PBC, you can enjoy interactive-type software as well as software having
  • Magnavox MRD300 | User manual, English (US) - Page 30
    cause not within the control of Magnavox. • reception problems caused by signal conditions or cable or antenna systems outside the unit. • a is officially distributed by Magnavox. In countries where Magnavox does not distribute the product, the local Magnavox service organization will attempt to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Front Speaker
(Right)
Front Speaker
(Left)
MRD300
1
2
PUSH
OUT
PUSH
IN
Center Speaker
Rear Speaker
(Surround Right)
Rear Speaker
(Surround Left)
Passive
Subwoofer
FM Antenna
AM Loop
Antenna
MAGNAVOX
S M A RT. V E RY S M A RT.
Rear of TV
(example only)
Connecting Speaker Cable
Printed in China
First connect ...
... then play
(see next page)
Helpful Hints
To obtain a better picture quality effect, you can
choose to connect an extra video connection if
your TV has the same input connector:
A
or
B
.
If your TV has
this video input jack(s)
A
B
Use this
video cable(s)
not supplied
S-VIDEO
IN
COMPONENT VIDEO IN
ANTENNA IN
When listening to TV programs
, press
TV•AUX
button at the front panel
of the DVD system to select ‘AUDIO IN-TV’ in order for the sound to be
heard.
For connecting to a VCR
, see page 9 in the owner’s manual for more details.
If your TV has only
a single Antenna In
jack
, you will need an
accessory RF
modulator.
The RF modulator
converts the video from the
DVD system so it can play
through the TV’s Antenna
connector. Refer to your
owner’s manual for proper
connection (refer to page 9 in
the owner’s manual.)